What should I do if the newly bought porcelain wine jug has a pungent smell?

Stuff some clean toilet paper into it, or put some activated carbon, mainly to absorb odor.

1.Boiling water to remove odors: After the new cup is cleaned with dish soap, pour in boiling water, leave it for one night, pour out the water the next day, and then wash the cup again, which can basically remove the smell.

2.Orange peel (grapefruit peel) to remove odors: After washing the cup, put fresh orange peel or grapefruit peel into the cup, close the lid, leave it overnight, pour it out and wash it the next day.

3.Vinegar to remove odor: Wash the cup with dish soap for the first time, dilute it with a few drops of vinegar in warm water, then pour warm water into the cup, leave it in the state of opening the lid for half an hour, then pour out the water and clean it.

Milk odor removal: Wash the cup with dish soap for the first time, then pour in 2 3 tablespoons of fresh milk, tighten the lid, shake the cup for about a minute, pour out the milk, and clean the cup. 5.

Tea odor removal: Wash the cup with dish soap for the first time, put in the tea leaves, pour boiling water, make it look like strong tea, leave it for about 3 hours, pour out the tea leaves and clean them.

Summary. Hello, dear [Bixin], thank you for using the Q&A service. In the process <>of consultation, if you have questions that you don't understand, don't understand, or don't know how to operate, you can continue to consult me. <>

I am proficient in all kinds of digital, electronic, and electrical product services, and professional answers give you peace of mind and comfortable <>

If you are still troublesome after the consultation, you can click on the end of the consultation in the upper right corner, and if you are satisfied, you can light up 5 little stars for me, your affirmation is the greatest support for me. <>

How to get rid of the smell of the newly bought electric kettle.

Hello, dear [Bixin], thank you for using the Q&A service. In the process <>of consultation, if you have questions that you don't understand, don't understand, or don't know how to operate, you can continue to consult me. <>

I am proficient in all kinds of digital, electronic, and electrical product services, and professional answers give you peace of mind and comfortable <>

If you are still troublesome after the consultation, you can click on the end of the consultation in the upper right corner, and if you are satisfied, you can light up 5 little stars for me, your affirmation is the greatest support for me. <>

Ingredients to prepare: baking soda, beer, water, scouring pads. Step 1:

Pour an appropriate amount of baking soda into the kettle (baking soda has a cleansing and decontamination effect, and can remove dirt from the newly purchased electric kettle). Step 2: Then pour an appropriate amount of water into the kettle.

Step 3: Pour an appropriate amount of beer into the kettle (beer contains alcohol, which evaporates very quickly and can evaporate the odor molecules in the kettle). Step 4:

Close the lid of the electric kettle and let it sit for 5 minutes. Step 5: Use a scouring pad to wipe clean the kettle.

Step 6: Then rinse the kettle with clean water. Step 7:

The smell of the newly bought electric kettle has been resolved.

1. Due to the process of delivery, shipment and display, some mud, dust, packaging crumbs or residual red aluminum powder and other sundries are often attached to the newly purchased purple sand tea set, which should be eliminated before use. In addition, after the new pot is out of the kiln, the tea flavor is not absorbed, and the fire and rustic atmosphere are still heavy, if it is not removed first, it will hinder the purity of the tea soup. In addition, some operators often put a layer of wax oil on the surface of the newly baked clay pot to add the luster of the body of the pot and beautify the appearance, this layer of oily foreign matter not only blocks the pores of the pot surface, but also constitutes a layer of protective film, which is not subject to tea, if it is not removed, it is bound to be in vain to raise the pot.

2. Take a clean and odorless pot by boiling and removing the flavor, place the lid and the body of the pot separately at the bottom of the pot, pour water into the body of the pot to make it higher than the body, and gradually heat it to boiling with a simmer. In this step, it should be noted that the body of the pot and the water should be heated synchronously, and the body of the pot should not be suddenly placed into boiling water as contained in some books. After the water boils, take a handful of low-cost tea leaves and put them to boil, and after a few minutes, scoop up the tea residues, and the clay pot and tea soup continue to simmer over low heat.

Wait for. After 2 or 3 minutes, carefully remove the teapot with bamboo chopsticks and set it to cool down (hurriedly flush cold water). Finally, rinse the inside and outside of the pot with clean water to remove the residual tea residue, and it can be officially activated. Third, the brush cleaning method is a more cumbersome method, first warm the kettle with warm water, and then change the boiling water to fill the kettle, and pour hot water on the surface of the kettle, so that the whole pot maintains a low temperature form.

Then hold a soft-bristled toothbrush and dip it in toothpaste, brush the whole pot thoroughly inside and outside several times, and rinse off the foam with hot water to remove the earthy smell and wax. Although the brushing method is simple and easy to operate on the tea table, the effect is not as thorough as the boiling method. In addition, some brands of toothpaste (especially those with strong detergency emphasis) contain higher levels of abrasives, which may easily leave some scratches on the delicate clay pots (such as vermilion mud and green mud), so it is advisable to use dishwashing detergent instead.

Add tea leaves and soak in boiling water overnight.

1. First of all, rule out whether it is a kettle or a water quality problem, that is, replace a kettle to boil water to see if there is any problem;

2. If it is a kettle problem, due to the residual orange taste in the process of making the kettle, it is recommended to boil water several times with lemon, tea, or vinegar to neutralize the smell;

3. It is recommended to communicate with the manufacturer, if there is a peculiar smell or not, whether there is a scientific and targeted method.

There is a strange smell after boiling water in a kettle, what is going on? Let's find out earlier.

1. It may be a water quality problem: the water quality is not good, there are some microorganisms in it, after heating, the microorganisms die and produce peculiar smells.

2. Kettle material problem: Kettle is a plastic type boiling kettle, the smell is better than the plastic cover and plastic handle of the kettle, in order to avoid the smell of water after boiling, you can transfer the water to other water bottles immediately after the water is boiled, or directly replace the kettle with a stainless steel kettle;

3. There is scale in the land zone of the kettle: the kettle produces a lot of scale in the process of long-term use, and these scales will produce peculiar smells when boiling water.