How to solve the problem that the wooden floor keeps ringing when stepped on? How to maintain wooden

Updated on home 2024-07-14
9 answers
  1. Anonymous users2024-02-12

    The wooden floors look stylish, warm in winter and cool in summer. Therefore, whether it is hot in summer or cold in winter, wooden flooring can be used, and the wooden floor can also automatically adjust the temperature, especially suitable for families with children and the elderly. When the wooden floor is laid, it makes a sound, and we can fill in the gaps, or wait a while, and that's it.

    1. The quality of the floor itself is not up to standard, and the sound insulation effect is very poor, which is rare, but there are also there. We can't be confused by some one-sided advertising words on the market, and we should check the trademark logo, production and manufacturing date, etc.

    2. The ground is not leveled, the filling material is not rounded, this situation is very large, the ground concrete and the main keel, the floor is not in a horizontal position, when suffering from the work pressure of the body, it will of course make a sound.

    3. The floor work handover is not on the ridge, and the nails of the connection between the wooden keel ceiling and the cement floor are loose or the connecting nails between the wooden floor and the wooden keel ceiling are loose, which is for the purpose of not getting home for the construction technology, and this situation is also very troublesome.

    4. The ground cage is paved against the wall or the interval between the ground cage is too large, people walk on the floor, there is a gap under the floor, and there will be sound if there is vibration.

    5. The waterproof and moisture-proof of the floor is not done in time, and the bearing capacity will become worse as soon as the floor returns to moisture, and it is very easy to deform when walking in it. Once the deformation will eventually cause the floor to crack, the wing angles will appear, and the floor will appear as soon as there is a gap and the working pressure will appear. It's a chain reaction.

    1. If there is a slight sound on the floor, it is a normal phenomenon. If you don't like to be noisy, you can first buy a special type of woodworking board silencer to wipe it, or take home talcum powder to wipe the surface of the floor, there is a slight sound can be eliminated, if the sound is very loud, it can also be alleviated to a certain extent, and it can be repaired at the right time.

    2. Smash the abnormal noise part, deal with the ground cage and then fill in the new floor. According to the length of the floor, the specifications and models of the ground cage spacing, you can nail the ground cage under the work handover head, and try the sound when you step on it.

    3. If it is due to the quality of the floor itself, or the ground is not leveled, it is proposed to repave, the cost of all repaving is a bit large, and then the next time you repave, pay attention to the floor leveling, to ensure that the ground concrete plastering layer wants you to have sufficient dry humidity, to ensure that the water content is within 8% before the main keel can be paved. If it is a wooden keel ceiling, brush with anti-moth paint and fireproof coating, if the living environment is more damp and cold, the main keel can also be upgraded with a layer of wool floor or polypropylene cloth to prevent the floor from returning to moisture and deformation, and then pay attention to the maintenance of the floor after paving. There are many reasons why the floor can be sounded

  2. Anonymous users2024-02-11

    The wooden floor keeps ringing when stepped on, which may be caused by the fact that the ground dragon and the wooden tenon are not firmly fixed, or the wooden tenon material is too soft, which is caused by the ground dragon pulling up. In order to prevent this from happening, the wooden tenon material must be harder than the earth dragon, so that the earth dragon is not easy to pull up the wooden tenon, and at the same time can maintain stability.

    How to maintain wooden flooring?

    1. Keep the floor dry and clean, do not wash with a lot of water, and pay attention to avoid long-term immersion of the floor.

    2. If the floor has oil stains and stains, pay attention to remove them in time, you can use household soft neutral detergent and warm water for treatment, and it is best to use a special floor cleaning protection solution matching the floor to clean. Do not touch the surface of the floor with corrosive liquids such as alkaline water, oxalic acid, soapy water, etc., and do not wipe the floor with flammable materials such as gasoline and other high-temperature liquids.

    3. Frequent waxing of wood floors can maintain luster and reduce the aging and wear of paint surface.

    4. In case of special circumstances, the floor should be soaked in water, the water should be cleaned up in time, and the floor dealer should be told in time, and the floor should be removed by a special person, and the floor installation should be carried out after the ground and wall are completely dry.

    5. Be careful not to place cigarette butts, stoves and heaters directly on the wooden floor to prevent burn marks and burning**.

    6. Open the window frequently for ventilation, avoid exposure to the sun, and avoid the room being too humid, causing the ground to warp, fall off, rot and other phenomena.

  3. Anonymous users2024-02-10

    1.If the gap between the floors is large, you can sprinkle an appropriate amount of talcum powder or apply some wax to the gaps, so that there will be no sound in the gaps; 2.If there is local noise, you can use 502 glue to loosen the floor; If there is a large area of noise, it is advisable to remove the floor and re-install it.

    In the process of cleaning wood floors, never use organic solvents, just use simple general-purpose solvents.

  4. Anonymous users2024-02-09

    If the wooden floor keeps ringing when stepped on, it is likely that the gap between the wooden floor is relatively large, resulting in a beautiful seam in the middle of the floor, which can be effectively solved.

  5. Anonymous users2024-02-08

    <> "Why does the wooden floor squeak when you step on it, how to deal with it."

    1. The weather is dry.

    In drier weather, the adhesion between the wood floor and the wood floor will decrease, and the joints will start to loosen, and we will squeak when we step on it.

    In this case, when the climate returns to normal in Souchang, the floor will no longer make a sound. However, if the noise persists, the loose wooden floor needs to be re-paved to ensure that it is tight.

    2. Loosening between wooden floors.

    If there is a sound and there is no sound, it is basically caused by the loosening between the wooden floor and the wooden floor, such as a gap in the groove. If the sound is continuous when stepping on it, it is caused by the floor and the wooden tenon not being firmly connected. If you want to solve the problem, you need to ask a professional to remove the loose wooden floor burner, and then re-pave it again as required, and firmly connect the floor to the wooden tenon.

    3. The ground is uneven.

    If the floor is not leveled, the wooden floor will also make a creaking sound when stepped on after installation. It is necessary to remove and clean the noisy part of the wooden floor, level the ground in this part, and finally install the wooden floor.

    Precautions for the use of wooden flooring.

    1. Cleaning the wooden floor can not be directly sprinkled on it, be sure to use a squeezed wet rag or a wet mop to wipe and clean, directly sprinkled on the wooden floor will affect the service life of the wooden floor, and there will also be the problem of the wooden floor warping.

    2. If you want to continue to use the wooden floor after warping, then you need to pry the wooden floor open and put it in the sun for drying before it can be reinstalled and used, but in this case, the surface of the wooden floor has been damaged, and the possibility of deformation is also very large, and its service life after it will not be particularly long.

  6. Anonymous users2024-02-07

    After the floor is laid in the house, if you step on it and there is a squeaky sound, this is a problem that many friends who have just installed oranges and repaired the house have encountered after moving in, which is more depressing. So what is it that causes the floor to creak when stepped on? Is there a quality problem?

    With these questions, you might as well take a look at them together.

    1. Why does the floor creak?

    1. If there is a sound after stepping on it, it means that the floor is not paved, and the ground must be leveled before the floor is paved. The requirements for ground leveling are still relatively high, and the error range should be relatively small, otherwise the floor laid in the later stage will have the problem of hollowing the drum, and there will be a sound when people walk on it.

    2. Another reason is that the floor is unreasonable, such as there should be a reasonable gap between the floor and the keel, if there is no gap, after the thermal expansion and contraction of the later stage, the floor will bulge, and there will be a void in the middle, so there will be a sound after stepping on it. And this phenomenon will slowly extend, starting with a relatively small area, and after a period of time, there will be a sound in a large area.

    Second, what is a good solution?

    1. There is only a few pieces on the floor that there is a problem of sound, you don't have to go through a lot of trouble to sprinkle talcum powder in the middle of its gaps, many netizens have used it and found that the effect is very obvious. In addition, we can also use 502 transparent adhesive to apply in the crevices, these two methods are only suitable for problems that are not serious.

    2. If the production area is relatively large, at this time the floor can only be removed and re-laid, and when laying, it must be noted that the gap between the wooden board and the keel must be empty, and the wooden tenon should be fixed with tools to prevent the void and ensure stability.

    3. The gap between the floors should be left with relevant dimensions, not too round, not too small, so as to prevent the problem of arching in the later stage, and will not easily produce sound.

    Summary: When the wooden floor at home has the problem of abnormal noise after stepping on it, we have to solve the problem according to the cause, if it is only an individual floor stepping on the abnormal noise, you can try it through the above simple methods.

  7. Anonymous users2024-02-06

    The remedies for stepping on the wooden floor are applying floor wax, using 502 glue, using talcum powder, removing and re-paving, and covering masking paper.

    1. Wax the floor.

    You can apply some wax to the cracks of the wooden floor with a sound, and then bake the wax with low heat to make it seep into the cracks and there will be no sound, remember not to use too much fire, it may burn the wooden floor, if you are worried about the candle can be melted and poured along the edge, this is also feasible.

    2. Use 502 glue.

    When we step on the wooden floor, if we find that there is a sound on the floor, we will step on it with our feet and apply it along the gap of the board with 502 transparent glue, which is relatively simple and easy for everyone to operate.

    3. Use talcum powder.

    You can sprinkle some talcum powder between the gaps in the floor, through the feedback of many users, this method is also very effective, which can reduce the friction between the floors, if the gaps are small, it still has a good effect.

    4. Dismantle and re-pave.

    If there is no leveling before, the best solution is to remove the original floor, re-level the ground, and then pave it step by step.

    5. Cover with masking paper.

    If it is a lock floor, and it is a suspension pavement, it is more labor-saving, you can remove the dust and cover a layer of masking paper, and then install it, which is equivalent to processing a layer of silent film, forming a buffer layer, reducing the friction coefficient, and filling the gap.

  8. Anonymous users2024-02-05

    1. When installing the floor, due to the lack of moisture-proof measures, the floor is deformed after being wet, and there are gaps between the floors, and people will feel the sound everywhere when they walk. Therefore, before the user paves the floor, it should be evenly covered with moisture-proof mats, and the joints should be laminated and pasted with transparent tape, if the room is a geothermal floor, the floor can be turned on before installing the floor, and the moisture can be dispersed, and the floor can be laid after the laying is completed.

    2. The wooden floor is not installed firmly, and the foot is stepped on to produce friction and sound. Therefore, home decoration should choose a professional floor installer and connect it firmly.

  9. Anonymous users2024-02-04

    Wooden floor is a high-grade, environmentally friendly ground decoration material, but in the process of use, there will be the problem of stepping on the sound, which not only affects the aesthetics of the ground, but also affects the quality of life. Here are some of the causes and solutions for the sound of wooden flooring.

    1. The reason why the wooden floor is loud.

    1.Ground structure issues.

    Before laying the wooden floor, it is necessary to check the ground structure, because the unevenness of the ground will lead to the uneven laying of the wooden floor and the formation of gaps, which will lead to the phenomenon of stepping on the sound.

    2.Wooden floors are warped.

    Under humid, high heat and other conditions, the hormone moisture on the wood floor causes the wood floor to warp, which will cause a sound of stepping if it is not replaced or repaired in time.

    3.Problems with the installation of wooden floors.

    If the wooden floor is not installed properly or not installed properly, it will cause the wooden blocks to move and the floor to be uneven, resulting in a gurgling sound.

    4.Wood floor material problems.

    When choosing a wood floor oak board, it is necessary to consider the adaptability and density of the material from the hail, if the structure is loose or the density is low, the beam finger will appear to step on the phenomenon.

    5.Seasonal changes.

    When the seasons change, the wood expands or contracts due to changes in humidity, resulting in the problem of wooden floors clattering.

    Second, the solution to the sound of the wooden floor.

    1.Inspect the ground structure.

    Before paving the wooden floor, be sure to check whether the ground structure is flat, if not, you can do a good job of ground cement leveling construction, so as to avoid voids when the wooden floor is laid.

    2.Screening of high-quality wood flooring.

    When buying wood flooring, you should choose a better quality wood floor, and if there is a phenomenon of stepping on it, it is recommended to replace it in time.

    3.Repair warped wooden floors in a timely manner.

    If the wooden floor is warped, it should be replaced or repaired in time to avoid the problem of stepping on it.

    4.fixation of laminate flooring.

    When laying wooden floors, the fixation of wooden floors should be strengthened to ensure that there is no movement between wooden blocks and that the ground is flat, so as to reduce the gurgling sound.

    5.Regulate the humidity in the room.

    When the seasons change, the indoor humidity should be adjusted in time to avoid the expansion or contraction of the wood, and reduce the problem of the wooden floor stepping on it.

    In short, the sound of wooden flooring is a common problem, but as long as we pay attention to the quality of the pavement, the material of the wood, the flatness of the ground, the change of seasons and other factors, and take timely adjustment and maintenance measures, we can effectively avoid and solve the phenomenon of stepping on the sound, and maintain the beauty and quality of the ground.

Related questions
10 answers2024-07-14

1. The sports wooden floor is empty.

If the sports wood floor is empty, there are many reasons, one is that the sports wood floor is not fixed when it is laid, the main reason is that the number of nails used is not enough, or it may be that the nails are not firmly nailed. The sports wood floor sports system is fixed with glue liquid, and the gluing does not meet the requirements will also cause the sports wood floor to be empty. >>>More

8 answers2024-07-14

There are two reasons why the fridge keeps buzzing:

1.The thermostat is damaged and does not work, and the compressor cannot be stopped. >>>More

14 answers2024-07-14

The toilet tank keeps ringing for the following reasons: >>>More

16 answers2024-07-14

This is an unscientific statement, generally as long as it is not too frequent to strain, there will be no arthritis! Of course, if you don't move, you won't get arthritis, and of course it's not rheumatoid arthritis or anything like that!

4 answers2024-07-14

It should be a short circuit, and the horn sound will be automatically turned on.