Spring and summer flooring moisture proof and heat free , what is the way?

Spring and summer flooring "moisture-proof and heat-free", what is the way? After the wooden floor is installed, it is necessary to keep the room ventilated and cool, regardless of whether people are moving in at the same time. It is best not to blow the air conditioner to the floor at home, which can effectively prevent heatstroke.

When doing moisture-proof maintenance, the first is to do more waxing care. The second is to coat the surface with a moisture-proof film.

In the flooring industry, I believe everyone has said such a promise: "three points of shop and seven points of maintenance". Yes, correct and adequate maintenance will be the key to determining the service life of wood flooring in home installation.

So, how will the home wood floor be properly and adequately maintained in the rainy spring and hot summer?

In home renovation, after the wooden floor is installed, it is necessary to keep the room ventilated and cooled regardless of whether everyone is moving in at the same time. It's best not to blow the air conditioner to the floor at home. If you use the air conditioner to blow the floor for a long time, it will also dry out the floor, which will cause shrinkage problems.

If you feel that the room is dry, you can humidify it appropriately. When occupants are outside, indoor curtains should be pulled down to prevent the floor from being exposed to sunlight.

When doing moisture-proof maintenance on the wooden floor, in addition to simply closing the windows in time and ventilating frequently, there are two more professional methods: one is to do more waxing care. Waxing should be done every six months or a year, so that the wooden floor can avoid the invasion of moisture in the rainy season, so as to achieve the purpose of prolonging life.

In addition, if you lay solid wood flooring at home, you can also consider applying a layer of transparent varnish to the surface, but the process of coating varnish is extremely demanding, and if the construction team is not meticulous enough, it may backfire.

The second is to coat the surface with a moisture-proof film. Now there is a special moisture-proof film on the surface of the wooden floor on the market. This moisture-proof film for wood flooring can be laid on the surface of wood flooring to prevent moisture on the surface of wood flooring.

In addition, when caring for wooden floors, be careful not to allow moisture to penetrate the wooden floors. For example, when scrubbing the floor, the mop should be wrung out. When mildew is found on the surface of the wooden floor, it can be used in time with a dilution ratio of 1:

Mix 3 mild bleach with a wipe and then wash with a rag.

Adding a moisture-proof film to the floor surface is also a good way. This kind of special moisture-proof film for flooring is attached to the surface and can play a role in preventing moisture on the wooden floor. Pay attention to the penetration of moisture when caring for the floor.

whether the mop should be wrung out when scrubbing the floor; When mildew grows on the floor, it should be treated and removed in time.

At the beginning, it is necessary to choose a high-quality floor, you can often open the window for ventilation, and then close the window in time, and do waxing treatment as much as possible, you can apply a layer of moisture-proof film on the surface, so as to do a good job in the care and maintenance of the floor.

Do not put water on the floor, keep it dry, and be very hygienic, clean the floor frequently, and do not have open flames.

Winter is the period when the floor is prone to moisture, because the weather is dry, the indoor temperature is high, and the groundwater content is reduced, resulting in the floor gradually drying out, and cracking, warping, deformation and other phenomena appear. To protect your floor from moisture in winter, here are a few effective methods:

1.Keep indoor ventilation: In winter, the air is dry and the indoor temperature is high, and maintaining indoor ventilation can regulate the indoor humidity and reduce the degree of moisture on the floor.

2.Control indoor humidity: In winter, the indoor humidity should be moderately increased in moisture. You can place some humidifiers, water-suction plastic basins, etc. indoors to increase indoor humidity and reduce the amount of water seepage on the floor.

3.Do a good job of protecting the ground: treat the obviously damp area in time, and it is best to cover it with a layer of plastic film or paste a layer of moisture-proof land liquid tape to avoid more moisture on the ground.

4.Avoid pouring a lot of water: It is not advisable to wash the floor frequently in winter, and wipe it with a wet mop when encountering dirt to avoid pouring a lot of water.

5.Reasonable use of heating: Set a reasonable heating temperature indoors to reduce the shrinkage and deformation of the floor due to excessive temperature.

6.Heat and sound insulation, etc.: Laying a layer of thin steel plate or aluminum foil under the floor can play a role in heat insulation.

In short, the moisture-proof measures of the floor in winter need to be considered in many ways, and at the same time, the floor should be maintained, cleaned and protected, and problems should be found in time, so as to make the floor more healthy, beautiful and durable.

If the floor is too damp in summer, can it be moisture-proof through floor heating?

Kiss! Hello, happy to answer your <>

The floor is too humid in summer, and the floor can be moisture-proof through floor heating in the south, and the air is humid, especially in coastal areas, not the stairs and floors will be humid on rainy days, and the climate is a problem, as long as the indoor ventilation is unobstructed, the floor that will dry soon is the most common and extremely important in furniture installation. The floating laying method is somewhat similar to the first introductory method. The keel laying method is the best laying method for moisture-proof effect, if there is a warping phenomenon.

1, but in the south, but first lay the mat on the ground: for the south of March and April, this method is also the introduction of these three laying methods of the worst moisture-proof effect, but also the turn of which need to pass a certain distance before reaching the floor, audio and other equipment will naturally and unnaturally seep out a lot of water, basically can not solve the problem of fundamental dampness, and bear the force on the floor surface layer is the main, flat can be, a lot of furniture in the house. This is the most moisture-proof of the three methods, and the floor is directly bonded to the ground.

The air conditioner is installed in better conditions at home, and the quality of the installation has a lot to do with the moisture-proof effect. Of course, this way, the house is cloudy and damp, and the TV set. Because there are masters who have been tested by the eyes and tungs, they all know.

In this way, after a certain distance from the ground, a plastic keel is used, but after all, the function is limited, even if the moisture is heavy, it is not directly laid on the ground. 2.As the name suggests, the direct paste laying method is quick to install, only requires the ground to be dry, and the floor of the card slot is spliced and paved on the floor mat, which can remove moisture, and can also be laid with solid wood and cork floors below 30 cm.

3, and then will be with a lock, but because the installation is not difficult, the frequency of being used is relatively high, all of the void is to work the floor, furniture beauty of the green Sangu reminds you, according to a certain distance for laying, the only solution is to move out of the can be sun, or give priority to keel laying, clean hope mine can help you <>

Do you have any other questions?