The floor creaked and creaked, and the floor creaked and creaked. What s going on?

Updated on Car 2024-07-14
16 answers
  1. Anonymous users2024-02-12

    1. The creaking of the floor is generally caused by the following reasons:

    1. Due to the uneven ground: after the floor paving is completed, there is a gap between the floor and the wooden keel in some places, so the floor vibrates up and down when walking on the floor, resulting in a sound. In this case, there is an immediate noise when people move around, and it is local.

    2. Insufficient reserved gaps: The gaps around the floor are not reserved enough, resulting in arching after the floor expands, and friction occurs when the notches float up and down. It is characterized by the fact that it does not sound just after the paving, and after a period of time, it begins to sound in a large area.

    Therefore, I remind everyone: when laying the floor, there should be enough gaps around the perimeter to ensure that the reserved gaps are even. At the same time, when the pavement length exceeds 8m, partition and bridge treatment should be done.

    Second, the solution.

    The most effective and thorough way to solve the noise of the floor is, of course, to re-pavement, but this is too time-consuming and labor-intensive, and I believe that many friends are not willing to rework, so here are some simple ways to summarize it:

    1. You can sprinkle some talcum powder between the gaps in the floor (many netizens think it works after practice).

    2. If there is a sound on the floor under your feet, step on it with your feet and apply it along the gap of the board with 502 transparent glue, which is relatively simple.

    3. Apply some wax to the gaps, and then bake the wax with fire to make it penetrate into the cracks, and there will be no sound.

  2. Anonymous users2024-02-11

    1.The most direct and effective method, many netizens have tried, sprinkle talcum powder in the cracks of the floor, which can help lubricate and have a certain effect. In addition, some people will use laundry detergent, soak it in water, and then inject it into the seams of the floor, which can have a certain effect.

    However, these two methods can solve the problem of relatively small sound.

    2.The most fundamental solution is to solve the keel problem under the wooden floor, for example, if the keel is loose, we need to re-nail the nails to strengthen the nail grip force, and at the same time the tenon and groove of the wooden floor should be tightened to avoid the expansion problem caused by the humid air.

    3.At the same time, when relaying the wooden floor, it is also necessary to pay attention to the gap between the wooden board and the wooden board to leave a little larger to prevent the problem of thermal expansion and cold contraction of the arch.

  3. Anonymous users2024-02-10

    The sound of solid wood floor originates from the fact that when people walk on the solid wood floor, the solid wood floor moves up and down, and the groove of the solid wood floor rubs against each other to produce a sound, which causes the solid wood floor to move up and down The reasons are:

    1. The ground is uneven, there is no leveling when installing the solid wood floor, and the solid wood floor is partially suspended between the wooden keel. The wooden keel is not solid, and the keel is suspended in the air, both of which will produce a sound, and it will produce a sound immediately when walking on the solid wood floor after installing the solid wood floor;

    2. The installation of solid wood floor is insufficient to reserve the gap, and the solid wood floor expands to produce a slight arch, which is usually difficult to feel with the naked eye, but this slight arching effect has produced a gap between the solid wood floor and the keel, and in the process of people walking, the solid wood floor trembles up and down, and the tongue and groove rub against each other to produce a sound, and the sound produced by this reason is often not when it is just installed, and it is generated in the later use process, and it will sound everywhere. If the solid wood floor is seriously deformed by moisture, the solid wood floor will not sound when it is squeezed very tightly, because the solid wood floor is too tight, and the solid wood floor will not shake up and down when people walk.

    3. When installing the solid wood floor, the moisture-proof film is not supported by the cushion, the moisture of the ground penetrates into the back of the solid wood floor, and the solid wood floor produces a slight tile change and distortion.

    The current treatment method taken by the dealer:

    1. Essential oil maintenance was done in a room, and a small amount of essential oil penetration was focused on the local abnormal noise parts.

    2. The local abnormal noise part of a room focused on the appropriate amount of white oil (sewing machine oil) penetration, the effect was obvious at that time, and the phenomenon was still the same the next day.

    3. The gap between the local abnormal noise parts of the solid wood floor in one room was adjusted, and the abnormal noise was eliminated at that time, and there was no abnormal sound when stepping on it.

  4. Anonymous users2024-02-09

    The composite floor is suspended and laid, and there is a buffer layer in the middle, which is not thick, so the flatness of the floor should be higher, and the unevenness will be loud, and only the symptomatic solution can be solved. You can ask someone to use 801 glue to mix cement to scrape it locally, and then lay the floor will be better.

  5. Anonymous users2024-02-08

    In order to have a comfortable touch and create a warm living environment, many friends will lay wooden floors in the house. However, after the wooden floor was used for a short time, as soon as people stepped on it, it made a "creaking" sound, which made people feel very annoyed and affected the rest and mood of the residents. How do you fix the creaking of the floor?

    How to solve the key right when the floor creaks.

    You can sprinkle an appropriate amount of talcum powder in the crevices of the floor; You can apply some wax to the cracks in the floor, then bake and melt the wax with fire, and then let it slowly penetrate into the cracks; If the above methods have been tried and have no results, it is recommended that you remove all the wooden floors on the ground and re-pave, so that the sound problem can be completely solved.

    Why does the floor creak.

    1. The ground is not cleaned.

    Before laying the floor, it is necessary to clean the dust, sand, garbage, etc. on the ground, if the ground is not cleaned directly on the floor, or not cleaned, the floor can not be paved, and the floor and the floor will directly produce a large gap, so that people will make a sound when walking.

    2. Caused by uneven ground.

    During installation, several adjacent floors were not close to each other, so that there was a gap between the floor and the keel, and the ground was not paved, which caused the floor to rub up and down when people walked, resulting in a loud sound.

    3. Caused by insufficient reserved gaps.

    When the floor is installed, it is necessary to leave a certain gap, if the gap is too small, then when the temperature of the ridge changes in the future, the floor will be prone to expansion, arching and other problems, and the notch position of the floor will also continue to produce friction, resulting in a large area of sound. It is recommended that when laying the floor, the gap must be reserved sufficiently, and the size of the gap should be uniform, and the size of the gap may be different if it is not seeping.

  6. Anonymous users2024-02-07

    If you step on the wooden floor at home, it will always make a creaking sound, which will be distressing, because if someone in the home is resting, it will seriously affect their sleep quality from time to time. So why does the floor at home creak and what causes it? And how to solve it?

    Today, let's talk about these issues with you.

    1. The reason why the wooden floor at home always creaks.

    1. It may be that the weather is relatively dry, or the indoor environment is relatively humid, so the sound will appear. If the weather is dry, the joints between the wooden floors will be weakened, and its joints will loosen. Of course, if it is too wet, it will also cause the floor to swell, and it will slowly arch up, and it will make a sound when you step on it.

    2. Sometimes it is found that after stepping on the wooden floor, there will be a sound, and there will be no sound for a while, this problem is mainly because there is some looseness between the wooden floor, for example, if there are some gaps between its troughs, if these gaps are loose, some noise will be generated.

    3. There will be a sound after stepping on it, that is to say, a sound will be made when you step on it, and it is continuous, because the connection between the wooden floor and the wooden tenon is not firm, or the material of the wooden floor is too soft.

    Second, how to solve the problem of wooden flooring creaking.

    1. If the wooden floor is loose due to the dry climate, we can wait until the climate is normal to observe it, if there is still an obvious sound, the arched wooden floor needs to be re-paved, so that the gap between them is more tight, and no gaps can be generated.

    2. If the sound comes and goes, we need to drill holes when installing solid wood floors, and the diameter of the drilled holes must be slightly smaller than the distance between the floor nails, so that the connection between the sub-floors is slightly tighter, and it is not easy to loosen and produce noise in the later stage.

    3. It is also very important to choose the material of the wood floor, if you choose the material of the wooden tenon, it must be slightly harder to ensure its stability, and it is not easy for the problem of squeaking in the later stage.

    Summary: If there is a creaking problem with the wooden floor at home, you need to find out the cause and then solve it accordingly.

  7. Anonymous users2024-02-06

    The main reasons for the abnormal noise of the wooden floor of the stage:

    1. The pavement ground is uneven.

    The wooden floor of the stage was not leveled before paving, resulting in cracks on the floor, and the squeak of the floor rubbing would be heard when the feet stepped on.

    Solution: Before the stage wooden floor is paved, the ground must be leveled, usually with self-leveling and leveling.

    2. The wooden keel is not connected.

    Between the components of the stage wood floor keel structure system, the connection is not dense and there is a gap, and there will be abnormal noise; The stage wood floor panels are not tightly bonded together, and there will be a sound after a long time.

    Solution: Strengthen the fixation between the various components of the stage wood floor motion system to ensure the stability of the stage wood floor system.

    3. Moisture-proof is not done.

    Before the stage wooden floor is paved, the pavement site should be dehumidified; Moisture-proof measures should also be taken during the paving process of the stage wooden floor, but if the ground moisture is too large when the stage wooden floor is paved, the moisture-proof is not done, which can also lead to the deformation of the floor by moisture, causing a sound of trampling.

    Solution: The ground should be dehumidified before the stage wooden floor is paved, and the installation and maintenance of the stage wooden floor should be moisture-proof.

  8. Anonymous users2024-02-05

    Answer 1: Use lubricants. There are two main lubricants that can reduce the noise of solid wood floors, one is solid graphite, and the other is liquid grease. The way of waxing is much simpler.

    After selecting the appropriate lubricant, it is applied to the loose cracks of the floor, and it is not applied on a large area, but after application, the friction between the two floors can be isolated, and the sound will naturally be reduced. 2. Use muffler. The muffler is suitable for local sound attenuation of ceramic tiles and has a very good effect, but it is not suitable if it is a large area.

    Have a great day! 

  9. Anonymous users2024-02-04

    The creaking of wooden floors is mainly caused by friction between floors. Not enough clearance when laying! When the floor swells and contracts, there will be a sound. You can insert pieces of paper or something between the gaps in the floor to raise the gap, and the sound will be eliminated.

  10. Anonymous users2024-02-03

    This is a loose place between the floors, find out the loose place, pour glue and then wedge it with wooden strips.

  11. Anonymous users2024-02-02

    A: Personally, I think that the floor at home is creaking, is there any way to solve it? There is a way to make a wooden floor like this, because the temperature in the house is too high, caused by it, you drag the floor of your home several times, and then you want to buy a heating gas, he will not sound, this is the way, there is no other way, and that's it.

  12. Anonymous users2024-02-01

    This is the case with wooden floors, you can just mop it a few times with a damp mop and put a humidifier inside so that there is no creaking.

  13. Anonymous users2024-01-31

    If it's a wooden floor, I don't think you should wear shoes that are too hard, and in addition, you should wax it somewhat.

  14. Anonymous users2024-01-30

    Whichever floor you buy, you will find which store to repair, which belongs to the quality of the laying, let them repair.

  15. Anonymous users2024-01-29

    This is the result of the old wooden floor laid on the keel, which has been expanding and shrinking for many years, and needs to be replaced if it is to be solved. Now the new wooden flooring is directly spliced, there is no such situation.

  16. Anonymous users2024-01-28

    The creaking of wooden floors is mainly caused by friction between floors. If the gap is not enough when laying, there will be a sound after the floor expands and contracts. Pieces of paper or something can be inserted between the gaps in the floor to raise the gap, and the sound will be eliminated.

    Hardwood flooring will make noise if it is not properly paved and used.

    1. You can step on the floor with your feet, if the floor floats up and down, it means that the floor is not flattened or the keel has shrunk when the floor is paved. You can step on a few more places, if most of them are like this, you can only disassemble and reload.

    2. If the float is very small, it is easy to do, generally the floor alder is too tight or unreal caused by the use of floor sound remover.

Related questions
14 answers2024-07-14

When the door hinge is used for a long time, it will make this noise, which can be solved by applying some lubricating oil to the hinge. Open the door to the maximum opening angle, clean the grease and debris on the surface of the limiter arm, stopper pin and connecting bracket, and then apply an appropriate amount of grease on the upper and lower surfaces of the arm. >>>More

15 answers2024-07-14

The abnormal sound of the car door is generally divided into three situations, one is the abnormal sound when the door is opened and closed, and the other is the abnormal sound of the door during driving. Another rare abnormal noise is the abnormal noise in the car door. There are different ways to deal with the three types of squeaks. >>>More

11 answers2024-07-14

1. When the car is moving, the chassis makes a creaking sound, which is a MacPherson suspension andShock absorbersThe link between the sections is issued. You can park the car in a relatively quiet place and turn off the engine, press the 4 shock absorbers with both hands, and press the body up and down to make the body shake up and down, and listen carefully in the process of shaking, you can hear which part of the sound is coming from. >>>More

13 answers2024-07-14

When the neck is shaken, the inside creaks, and the following treatment measures can be taken: 1. First of all, it is necessary to remove the predisposing factors that cause this situation, such as strictly prohibiting the patient from sitting and bowing his head for a long time, which is the most important for the alleviation of this type of symptoms, and it is strictly forbidden for the patient to work at the desk for a long time or bow his head and play with his mobile phone. In addition, it is recommended that patients ensure adequate rest, and it is generally recommended to rest in a flat bed. >>>More

14 answers2024-07-14

First of all, we need to prepare the tools that may be used, a word to change the cone, a T-20 spline, and need to prepare the vehicle maintenance to use the car rust inhibitor, butter, and then, let's start the wonderful solution process. Abnormal noise caused by the wiring harness inside the door striking the door panel. When the vehicle is driving on a bumpy road, it may cause the wiring harness inside the door to hit the door panel, so that there will be waves of noise, what we have to do is to disassemble the door trim panel, and then fix the wiring harness inside, it is best to find a small sponge, and then stick the ** bundle on the door panel, so that the wiring harness will hit the sponge, and there will be no noise. >>>More