How to deal with the broken water pipes on the wall of the decorator

If a decorator accidentally breaks a water pipe on the wall during the renovation process, there are several ways to deal with the situation:

The specific decoration of the house can be calculated here, just enter the area + city, calculate the decoration in 3 seconds, know the real ** in advance, and easily grasp the decoration company: [Click here, free decoration**].

2.Turn off the water source: The home should find the main water valve of the house and turn off the water source. This stops the water from continuing to flow into the wall, reducing further damage.

3.Contact a professional plumber: Renovators should contact a professional plumber immediately so that broken plumbing can be repaired. The plumber will inspect the damaged pipes and determine the method of repair and the materials needed.

4.Cost of restoration: The cost of repair will vary depending on the extent of the damage and the repair work required. In general, the cost of repairing a broken water pipe can range from a few hundred to several thousand dollars, depending on several factors:

Damaged Pipe Materials: Pipe repair costs vary depending on the material. For example, the repair cost of copper pipes may be higher than that of PVC pipes.

Labor and labor costs: The labor and labor costs required to repair the work also affect the total cost. In general, repairing a broken water pipe can take several hours of work, and the cost of a plumber's man-hour can range from a few hundred yuan to a thousand yuan.

Material cost: Some materials may be required to repair broken water pipes, such as pipe joints, glue, etc. The cost of these materials will vary depending on the quantity and brand required.

In short, if the decorator accidentally breaks the water pipe on the wall during the renovation process, the renovation work should be stopped immediately and the water source should be turned off. Then, contact a professional plumber for the restoration. The cost of repair will vary depending on factors such as the extent of the damage, materials, and man-hours.

Finally, it is recommended to recommend our "Tuba Rabbit", Tuba Rabbit has 110,000 decoration companies and first-class businessmen in his hands, and the direct sales of building materials are affordable. Tuba Rabbit is selected for decoration, and Tuba Rabbit can accompany the signing of the contract for free, "decorate first and then make payment", reducing the worries of the owners. For more decoration information, welcome to visit:

Click to enter, professional customer service free consultation good company].

Kunming - [Kunming Decoration Strategy Guide].

Suzhou - [Suzhou Decoration Strategy Guide].

Hefei - [Hefei Decoration Strategy Guide].

Fuzhou - [Fuzhou Decoration Strategy Guide].

Beijing - [Beijing Decoration Strategy Guide].

Dalian - [Dalian Decoration Strategy Book].

Hangzhou - [Hangzhou Decoration Strategy Guide].

Shanghai - [Shanghai Decoration Strategy Guide].

Tianjin——[Tianjin Decoration Strategy Guide].

First of all, you should immediately close the main valve of your own water pipe, and then smash the damaged wall of the water pipe, if the situation is more serious, then the whole pipe needs to be replaced; If it is only cracked, it can still be repaired, and after repairing, do a good job of waterproofing, and then seal the face wall. This situation needs to be handled by a professional maintenance master, and if you don't understand it, it may cause great damage to the wall and decoration, and you may not be able to find the exact location of the damage. The water pipe breaks the scheme of how to deal with it:

1. First close the valve of the water pipe, find the location of the rupture, and then chisel the wall at that position to check the situation. 2. If the rupture is not serious, it can be repaired, and if it is serious, the pipe needs to be replaced. 3. Use hot melt adhesive.

You can seal the ruptured water pipe, and then wrap it with waterproof glue, and carry out a pressure test after it is done. 4. After there is no water leakage, do a good job of waterproofing near the pipe and seal the wall. If the damage of the pipe is more serious, then we can replace the whole one, you can cut off the bad part, and replace it with a new one.

Or replace the joints of the pipe, which is simpler, and apply waterproof glue on the outside of the water pipe after replacement.

Fill it with a kind of waterproof putty (available in paint stores, don't go to buy waterproof cement in building materials stores), mix the old hole with dry lime and cement (42 5) evenly, fill to a lower level than the ground, and then scrape it flat with waterproof putty, and finally subsidize the ground bricks, which can be permanently water-free. Why can the water pipe be broken when installing the shower? Even if in addition to the hot and cold water pipes installed at the normal height, the water pipes of other functions in the above wall pass through, but these will be marked and the installation position of the shower will be reserved, so it is generally not possible to install a shower to drill through the water pipe!

There is no good way to do this. Only knock the tiles open. For this kind of work, it is best to find a plumber bricklayer at the bridge.

They are more professional. We ordinary people do it for two hours. They can do it in half an hour at most.

Knock on the tile cement, generally 30 cm long. A slightly larger pit can be drilled to allow enough room for backsteps. The installation position of the shower will be reserved by the hydropower union of the normal decoration company; The bricklayer should paste the water circuit prompt tape as soon as possible after pasting the tiles; The installer is of course responsible for punching holes in the pipeline when it is impossible to determine it.

Bathroom before the hole can ask the owner, the layout of the pipe, so as to avoid hitting the water pipe, if you accidentally hit the pipe, the treatment method is also very simple, first of all, turn off the main water valve, take off the tile in the leaking place, and weld it with the same type of water pipe to cut off the broken section with the PPR pipe, use the PPR pipe fuser to directly melt the corresponding pipe diameter, and then open the water inlet valve to the maximum valve flow diameter. Look at the welding joint to see if there is any water leakage, if there is no water leakage, and then re-plaster the pit and paste the tiles.

This first look at the original hydropower is to follow the vertical change of hydropower, if so, that is the responsibility of the installation shower master, the water pipe reservation in the vertical wall are embedded water pipes, why not avoid. If you ask for it to be installed, and inform you in advance of the consequences. That's up to you.

If the water pipe in your home is leaking, you can use two pieces of iron to make a hoop, wrap it in rubber in the middle, and tighten it with screws. If you want to be long-lasting, you have to chisel the surrounding cement, replace this section of pipe, cut off the damaged part, add joints to connect, check and confirm that there is no water leakage, and repair it with high-grade mortar masonry.

At this time, the broken water pipe can be sawed off and then re-welded, which is convenient and safe.

It's better to smash the cement straight away and replace it with a new water pipe.

Summary. 1. The first step is to see which pipe is wrong, whether it is the water pipe of the sink or the hot and cold water pipe of the water heater, and then prescribe the right medicine.

2. In the case of less moving wall tiles, a method similar to that of tire leakage can be adopted. That is, in the place where you break, use a hole opener to open a large round hole in the center of the hole, remove the cement around it, and after cleaning it, find a water pipe of the same material, cut it down as a patch, and the size should be larger than this hole.

3. Then use a lighter or spend dozens of dollars to buy an electric soldering iron, iron the edge of the patch, stick it together with the hole in the water pipe, and finally make up for the tiles drilled down.

I accidentally broke the water pipe in the wall of the water heater by punching holes, and I don't want to smash the wall, what should I do, how to repair it. Someone help me.

1. The first step is to see which pipe is wrong, whether it is the water pipe of the sink or the hot and cold water pipe of the water heater, and then prescribe the right medicine. 2. In the case of less moving wall tiles, a method similar to that of tire leakage can be adopted. It is to use a hole opener to open a large round hole in the center of the hole with a hole opener, remove the cement around it, and after cleaning it, find a water reed tube of the same material, cut it down as a patch, and the size should be larger than this hole.

3. Then use a lighter or spend dozens of dollars to buy an electric soldering iron, burn the edge of the patch, stick it together with the hole in the water pipe, and finally make up for it on the drilled tile.

4. Whether it is drilling or repairing the water pipe that has been drilled without returning to the damaged pipe, it is not recommended that you come by yourself. In addition to buying a lot of tools, Leak Weilu also has to have craftsmanship and hands-on ability, but most of the owners are Xiaobai, and professional things are best done by professional people.

It is the hot water pipe of the water heater.

The hole was the hole that was pierced, and the suspected combination of metal and PPR was repaired with a fuser.

Scrap all the damaged pipelines and reconnect them to the open line. But this method is estimated to still have to open the hole, which is neither ugly nor easy, so it is recommended that you still honestly knock on the tiles, find the damage of Kaiyu, and smash out enough space. The seemingly simple task requires the cooperation of plumbers and bricklayers, but it is very troublesome.

It seems that the only way to find a master is to find it.

Yes, the master will make it right, without destroying the wall.

How much does it cost?

100 bucks.

A little expensive. It's already cheap, and it's even more troublesome when the water leaks.

I'm in Hengxi Town, Ningbo.

100 bucks I'm talking about the most conservative **.

After all, if you go to a worker now, you won't be able to do it without 100 yuan, and this job is more cumbersome.

Well. Uh-huh<>

First of all, you must turn off the main switch of the water pipe at home, otherwise it will be troublesome if the water leaks to someone else's house. Knock the tiles, find the broken place, the PPR pipe is hot melted with a hot melt gun, if it is an iron water pipe, go to the hardware plumbing store to buy a quick catch of the same caliber, check to make sure that there is no leakage, and repair it with high-grade mortar masonry.

Repair method of breaking the water pipe in the wall: the cement dries for a long time, it is recommended to use coarse particles of leveling putty to repair (multi-time leveling), and the original putty layer on the edge of the groove is also removed partially, and then paste an anti-crack cloth (can be used to make a good cloth), and then batch of smooth putty to make latex paint. In this way, the probability of cracking will be a little lower.

There is no way, no one can disassemble the wall to repair, and it can't be repaired minimally invasively through the wall, which is not surgery.

1. Scrap all the damaged pipelines and reconnect the open pipes to the open line. But this method is estimated to still have to open the hole, which is neither ugly nor easy, so it is recommended that you still knock on the tile honestly, find the broken place, smash out a large enough space, if it is a PPR pipe, weld it and replace it directly, and then go with the same wall tiles, cut it and paste it with cement. The seemingly simple task requires the cooperation of plumbers and bricklayers, but it is very troublesome.

2. Knock off the recent tiles of the break and repair them, and if you don't want to hit the tiles, you can only make the pipes from the new, which is more expensive and not good-looking. In addition to aluminum-plastic pipes. The other two kinds of pipe tapping may be able to be used as a plug by screwing with rose. Only one side can be opened to the tube.

I don't know what kind of tube you are. Galvanized pipe. Aluminum-plastic pipe. PPR tubes.

I don't know if you've got through the two of you. I guess it's only one side.

I don't know that the pipe you opened is the water pipe. Or hot water pipes.

Don't want to smash the wall. In addition to aluminum-plastic pipes. The other two kinds of pipe tapping may be able to be used as a plug by screwing with rose.

Only one side can be opened to the tube.

It can only be smashed, and the temporary repair time is as broken as long as it takes.

You can, you have to smash the wall.

Any other method is a palliative treatment rather than a cure, and it will still be missed in the future.

200-300, smash it, smash it so that everyone can worry.

It's better to smash it, so it's more worry-free!

Just do it all the way.

First of all, close the valve to prevent it from continuing to leak; Then, the location of the water pipe rupture is determined one by one by the water pipe pressure; After determining the location of the water pipe rupture, it is necessary to chisel the wall of the water pipe leak and replace it with a new water pipe; Finally, rebuild the walls.

How to repair the broken water pipe in the wall

If the dark water pipe in the wall is broken, it will be more troublesome to deal with. Therefore, when installing, be sure to choose a good quality water pipe and check whether it is in good condition.

After the water pipe in the wall is broken, the first thing to do is to close the valve. This is to prevent broken pipes from continuing to leak, wasting water, and damaging walls.

Secondly, because the water pipe is in the wall, it is difficult to judge the specific location of the water leakage, so you can judge it one by one by pressing the water pipe.

Connect the hot water and cold water pipes into a tube, close the valve and leave only one nozzle, then connect the pressure pump and start shaking the pressure gauge until the pointer of the gauge points between them.

Check the pressure value when it is stable for about half an hour, if the drop does not exceed one pressure, it means that the water pipe is not broken; Otherwise, it means that the water pipe is broken.

After finding the location of the water pipe rupture, it is necessary to chisel the wall of the water pipe leakage. When excavating, be sure to protect the furniture and floor tiles in the room.

After the wall is chiseled, the water pipe is replaced with a new one, and the hot melt connection is made with a hot melter. At the same time, it is best to apply waterproof glue to pipes and pipe grooves. Finally, it is enough to rebuild the wall of the leaking point.