When decorating your home, should you use cast iron or carbon steel for radiators? What s the differ

When home decoration, radiators.

Cast iron should be used, the difference between the two: the hot one is slower, the cold one is slower, but it is heavy and will continue to occupy the indoor space of the home, corrosion resistance, long service life and other advantages. Cast iron radiators are very durable.

This is mainly because the pressure bearing capacity of the cast iron radiator itself is not very good, so its thickness is relatively thick, basically three points of millimeters. At the same size, the total area of thermal conductivity of a cast iron radiator is much larger. Because the cast iron radiator is composed of pieces together, there must be a rubber gasket sealing in the middle of the piece, and the rubber gasket is very easy to age after a long time, resulting in water seepage problems.

And nowadays, cast iron radiators are used in central heating very much, and cast iron radiators will not be used for small household boiler heating, like our recently renovated central heating residential areas.

Cast iron radiators have long been changed to carbon steel radiators. At this stage, the service life of carbon steel radiators is more related to the water body of the radiator system software. Carbon steel radiators are low, beautiful, lightweight, and environmentally friendly.

Carbon steel is very easy to scratch, especially in children, some in order to better look good, some of the home with a lattice decoration. Cast iron radiator is a high-energy consumption commodity, which is very easy to cause air pollution in production, and the appearance is not good-looking, low thermal efficiency, and large volume, but the advantage is that it can be applied to all water and environmental factors, and is not easy to be corroded, it is called a radiator with the same service life as the building.

Cast iron radiators have a long history of application in China, which is the memory of our childhood, but with the development trend of time, we find that the general appearance of cast iron radiators is not good-looking, consumes heat, and is easy to pollute the environment when manufacturing, and the personalization, environmental protection and energy saving required by modern society, contrary to the requirements of modern society, so it is slowly being replaced by social development, and few customers buy and use it at this stage.

For radiators, I personally recommend using carbon steel, because its cost performance is there, and the use cycle will be very long, and the quality is also guaranteed.

The difference between cast iron radiator and carbon steel radiator is mainly in anti-corrosion, and the internal anti-corrosion treatment of carbon steel radiator is better than that of cast iron.

I think it should be cast iron; Different materials, different heat dissipation, different costs, different effects.

Personally, I think that when decorating at home, the radiator should be cast iron, because the iron dissipates heat relatively quickly, and the effect is better when the heating is sent in winter.

The radiator is carbon steel, which is better to delay the disturbance; The material is different, the effect is different, the use of the annual answer limit is different, the use of different methods of Qingdan vertical, in general, carbon steel can be used for a longer time.

Personally, I think it is better to install cast iron radiators, because it is not only durable, has a long service life, but also has a relatively fast effect on heat dissipation.

Carbon steel is more resistant to corrosion, while cast iron is easy to be corroded.

When choosing Huidana radiator, I think it is better to use carbon steel, which will have strong thermal conductivity and be more convenient to use. And it doesn't rust easily.

The selection and promotion of the choice of carbon noisy steel is good; I think it's better to choose a carbon steel radiator, because the radiator made of carbon steel has a very good heat dissipation effect, and it gives people a neat and beautiful feeling, and the cost performance is very high. Tenants.

The radiator is best chosen with carbon steel. No matter how long it is used, no rust will appear, and as long as it is kept hygienically clean, it will always look like new.

It's all possible, I think carbon steel is better, it can be better rust prevention, and the service life is longer.

Mild steel radiators are good, and they are also a popular radiator material in modern times.

The material of the radiator has a certain impact on the performance and service life of the radiator, the following is a comparison of cast iron and carbon steel

Cast iron radiator: Cast iron radiator is made of cast iron material, cast iron has good thermal conductivity, can quickly conduct heat, so that the room can heat up quickly. In addition, the cast iron radiator has a rough surface, which can increase the surface area and improve the heat dissipation effect.

However, the disadvantage of cast iron radiators is that they are heavier, require stronger support and traceability, and are easy to rust, so they need to be frequently sold and treated with anti-corrosion.

Carbon steel radiators: Carbon steel radiators are made of carbon steel materials, which have slightly inferior thermal conductivity to cast iron, but can also meet general heating needs. The surface of the carbon steel radiator is smooth, not easy to accumulate dust, and it is easy to clean and maintain.

In addition, carbon steel radiators are lighter in weight and easier to install.

In general, cast iron radiators are suitable for large-area heating, can provide relatively fast and uniform heat transfer, and are suitable for cold areas or places that require high-intensity heating. Carbon steel radiators are suitable for general heating needs and can meet the heating needs of general residential places. Choose the right radiator material according to your specific situation and needs.

Radiators, carbon steel aluminum finned tube radiators are mainly made of steel pipes, and steel pipes are a more suitable choice in terms of pressure bearing capacity and heat transfer performance. The pressure bearing capacity of the steel structure of the finned eggplant tube radiator can reach 20kg and above, and the heat transfer performance is also very good. Carbon steel aluminum finned tube radiator is the main device for heat dissipation in the heating system, it mainly uses a low-temperature medium, which is heated into a high-temperature medium through a heat source, and then input it into the pipeline through a certain method, and then transmitted to the indoor room where the radiator is installed through the pipe, so as to achieve the effect of indoor heating.

Finned tube radiator.

Carbon steel aluminum finned tube radiators usually have three options for internal medium, one is hot water, which is also the heat medium we are very familiar with; the other is steam, which is often used in some larger places and has a higher heat transfer temperature; The third is heat transfer oil, which is a relatively common medium in the industrial field. The carbon fin tube radiator is suitable for the heating system of water and vapor, the temperature of heat transfer using steam is higher than the temperature of heat transfer using hot water, and the steam finned tube radiator is often used as heating equipment in tall industrial workshops, and it is also a very effective heating method. <>

Finned tube radiator.

Carbon steel aluminum finned tube radiator uses steam for excellent heat transfer in the posture of the industrial workshop, and the temperature carried by the steam is transferred and dissipated through its own flow and physical push, so as to achieve the purpose of raising the indoor temperature. The specifications of carbon steel aluminum finned tube radiator can be distinguished according to the different diameters of steel pipes, there are thinner 4 tubes and 6 tubes, or thicker 2-inch tubes, 3-inch tubes, and it can also reach 6 inches according to the needs of users. <>

Finned tube radiator.

Therefore, most families will put a cover on it, some for the sake of beauty, and some families make a decoration with a lattice. It's cold outside the house in the winter in the north, but it's very warm at home, and now I miss the heating at home and my parents far away even more in this season. We don't know.

Therefore, if we plan to choose a radiator, we should have some understanding of some of the properties of the radiator. For example, a friend now asks such a question: Is it better to cast iron or carbon steel radiators?

The rest of the materials are less used, and the advantages are not as good as steel and copper-aluminum composite materials, so it is more recommended to choose between steel and copper-aluminum composite radiators.

Due to the high plasticity of the <> carbon steel sheet, it is easier to add more styles to the work, and the outer layer is more beautiful. The production cost is also relatively low, as long as you don't choose to buy copper and aluminum composite heating with code sheets, the cost performance is also very affordable. It really affects the aesthetics of home decoration, but carbon steel radiators do not have such worries, on the whole, the aesthetics of carbon steel radiators are very good, and the aesthetics of home decoration are also very good, very suitable for modern homes.

But because carbon steel radiators are more environmentally friendly, there are more people who use them, if you use carbon steel radiators at home, remind you that when you are not using them, ensure that there is enough water in the radiator to prolong the service life. The lifespan is more than 50 years. After entering the 90s, a hundred flowers bloomed, there were more cast iron impurities in the cast iron radiator, the quality was reduced, the large factory did not do it, and the quality was poor after being cast by a small factory, and then, the cast steel radiator was developed to replace the previous cast iron material.

In short, compared with cast iron radiators, carbon steel radiators, and skirting heaters, the overall advantages of kicking warmers are obviously much stronger, so skirting warmers are the best heating methods, thank you for reading and paying attention. The following is a small ** at a glance to know how good the skirting is warm, the steel is also good, that is, the corrosion resistance is not as good as cast iron, reasonable use, and it is no problem to use it for ten or twenty years. The generally enforced warranty policy is:

Five-year water leakage replacement, 10-year warranty.

I think carbon steel is better because iron is more prone to rust.

It is best to use carbon steel, because this can ensure the heating effect very well, and the quality is also very good.

The carbon steel is better, the temperature of this sail will reach a very high level, and it is not easy to be damaged, the degree of egg retrieval is also better, and it is easy to break and rust if it is hungry and filthy.