How to make the simplest styrofoam How to make the simplest styrofoam

Styrofoam is a kind of entertainment product, which has the characteristics of softness and foaming.

Materials required for styrofoam:

White gum, aloe vera gel, borax water.

First of all, add white glue, do not choose too inferior white glue, otherwise the mud made is not good; Add an appropriate amount of aloe vera gel and stir well, then add an appropriate amount of borax water, it is recommended to add borax water little by little at a time, and then slowly according to your own feeling, you can add a little more if you like a little harder, and if you like a little less, you can add a little less; Stir well and the finished product is ready.

It must be noted that the last step is to control the borax water, and the first step of white glue is to be controlled, so that the simple and fun "styrofoam" is completed!

Temperature is an important factor to consider when making the simplest styrofoam. In general, temperature has a great influence on both the forming and curing process of styrofoam. Making at room temperature can be difficult, as lower temperatures can affect the stickiness and flow of styrofoam.

Therefore, I recommend controlling the temperature to twice the normal temperature.

Choosing the right raw material is also the key to making the simplest styrofoam. There are many kinds of raw materials on the market that can be used to make styrofoam, but I recommend using fresh aloe vera gel. Not only is this product loved and praised by a lot of consumers, but it also works very well.

Fresh aloe vera gel has good viscosity and elasticity, can effectively bond various materials, and has good water resistance.

Next, we need to prepare some other materials as well as tools. The first is glucose or sucrose, which is one of the essential ingredients for making styrofoam. You can adjust the amount of sugar as needed, but don't add too much, as it may affect the stickiness and drying time.

The second is alum, which is a common chemical that can help styrofoam cure better. You just need to add a small amount of alum to the mixture and you're good to go.

Some water and pigment are also required. Choosing the right amount of water and color can be adjusted according to personal preference.

Now let's start making styrofoam! Put a certain amount of fresh aloe vera gel in a container. Then, gradually add an appropriate amount of sugar and stir well until the sugar is completely melted.

Next, you can adjust the viscosity to suit your needs. If you want the styrofoam to be a little thinner, you can add an appropriate amount of water. If you want a thicker styrofoam, you can add a small amount of alum.

You can add some coloring to add some personality to the styrofoam. Remember to add the pigment gradually and stir well until you reach your desired color.

Once made, pour the styrofoam into an airtight container and keep it in a cool, dry place. Wait for a while for it to solidify completely.

The simplest styrofoam is done! You can now use it to your heart's content to glue materials, tinker with items, or create crafts.

Making the simplest styrofoam requires paying attention to the temperature, choosing the right raw materials, preparing the required materials and tools, and mixing them in a certain proportion. Hope mine helps you!

There are three steps to homemade bubble glue:

1.Pour less than half a cup of glue into the cup and add a small amount of pure glycerin, and squeeze into the shower gel, which can add a super drawing effect to the styrofoam.

2.Using chopsticks, stir the glue, glycerin, and body wash in the cup until well combined.

3.Add soda water and stir to mold, after molding, test the extensibility of the bubble glue by hand, and the foaming glue is completed.

The main role of styrofoam is entertainment, because the feel is relatively soft, there will be bubbles, so it is more sought after and loved by young people, and the do-it-yourself production is more playable, and there will be some decompression effects.

Styrofoam is mainly made of glue and a care solution that is easy to bubble plus some borax, because the fluidity is better, and the color after adding pigment is also better, so it is more popular with young people, and it will make people feel more relaxed in the process of pinching styrofoam, so some people will also use it to decompress.

Because the production process of styrofoam is relatively simple, it can generally be done at home, of course, you can also choose to buy some products outside, and try to choose to buy more regular stationery stores when buying, so as to ensure that the products are safe, non-toxic and environmentally friendly.

If you do it yourself, you need to buy some glue and other materials, choose Chenguang's transparent glue, borax, pigment, shower gel, and mix them together until the bubbles are not sticky. It is relatively safe to make your own styrofoam, and it can also enhance your hands-on ability. It should be noted that you should pay attention to the cleanliness of your hands after playing.

First add glue, then add a small amount of toothpaste to stir from white, then add the color paste, then add an appropriate amount of borax water, stir to form, and then start to foam. Simple styrofoam ready. The specific steps are as follows:

Materials: glue, toothpaste, pigment, borax water.

1. Prepare a container and add an appropriate amount of glue.

2. Add a small amount of toothpaste and stir well.

3. Add a few drops of your favorite color and mix well.

4. Stir well, then add an appropriate amount of borax water, and stir to form.

5. Then start bubbling, lift it up when it's bubbling, then fold, fold, fold, repeat a few times.

Add glue first, then add a small amount of toothpaste and stir from white, then add your favorite color paste, then add an appropriate amount of borax water, stir to form, and then start to foam. Simple styrofoam ready. The specific steps are as follows:

Materials: glue, toothpaste, pigment, borax water.

1. Prepare a container and add an appropriate amount of glue.

2. Add a small amount of toothpaste and stir well.

3. Add a few drops of pigment of your favorite color and stir well.

4. Stir well, then add an appropriate amount of borax water, and stir to form.

5. Then start bubbling, lift it up when it's bubbling, then fold, fold again, fold again, repeat a few times.

Notes:1. Don't let the glue stick during the production process.

2. Be careful not to play with children to prevent accidental ingestion.

Summary. Kiss! Hello, happy to answer your <>

The simplest way to make styrofoam is as follows: Method 1: First prepare a container and add an appropriate amount of glue to it.

Then add a small amount of toothpaste and stir well. It should be noted that the amount of toothpaste must be paid attention to, otherwise it will not be able to bubble later. Then add the pigment of your favorite color and stir well.

After stirring well, add an appropriate amount of borax water and stir to form. Then start to lather, pick it up when it bubbles and fold it several times. For all of the above steps, you can repeat the foaming three times.

Method 2: First add a piece of clay to the container, then add water to melt. Once it's melted, add the pigment of your favorite color.

After that, add your usual hand sanitizer and stir it well. Then add the foam and stir to mold, if not enough, add again. Keep stirring, and after stirring and molding, you can get started, so that the styrofoam is ready.

Hope mine can help you <>

Do you have any other questions?

The easiest styrofoam to make.

Kiss! Hello, happy to answer your <>

The simplest way to make styrofoam is as follows: Method 1: First prepare a container and add an appropriate amount of glue to it.

Then add a small amount of toothpaste and stir well. It should be noted that the amount of toothpaste must be paid attention to, otherwise it will not be able to bubble later. Then add the pigment of your favorite color and stir well.

After stirring well, add an appropriate amount of borax water and stir to form. Then start to lather, pick it up when it bubbles and fold it several times. For all of the above steps, you can repeat the foaming three times.

Method 2: First add a piece of clay to the container, then add water to melt. Once it's melted, add the pigment of your favorite color.

After that, add your usual hand sanitizer and stir it well. Then add the foam and stir to mold, if not enough, add again. Keep stirring, and after stirring and molding, you can get started, so that the styrofoam is ready.

Hope mine can help you <>

Do you have any other questions?

I've got dish soap, toothpaste, or something.

Pro-styrofoam can be made by mixing dish soap and toothpaste, using styrofoam raw rubber as the base liquid, adding detergent, and then putting in decorations, stirring evenly to make styrofoam. Method: Add an appropriate amount of foamed raw gum to the container, pour a small amount of dish soap, and then add a small amount of toothpaste and stir well.

Add an appropriate amount of pigment and stir well, then add an appropriate amount of borax water, and stir to shape. Lift up when lathering and fold multiple times.

Here's how to make styrofoam:

Materials: clay, hot water, colouring, dish soap, soapy water, shaving foam.

Tools: containers, spoons.

1. Put clay in the container.

2. Add hot water and stir.

3. After stirring into a paste, add dish soap.

4. After stirring, add the pigment.

5. Stir well, after changing color, add soapy water.

6. Continue stirring, then add shaving foam.

7. After stirring evenly, after a period of time, the simple styrofoam is completed.

Precautions for making styrofoam

1. Choose appropriate materials: Use high-quality glue and additives to ensure that the foam made has good adhesive properties.

2. Follow the correct formulation: Accurately measure and mix glues and additives according to the formulas and guidance provided by the manufacturer. Do not change the formula at will, so as not to affect the performance of the foam.

3. Pay attention to safety protection: When making foam, wear appropriate protective hand covers, glasses and masks to avoid exposure to harmful chemicals.

4. Control temperature and humidity: The production and curing process of foam rubber has certain requirements for temperature and humidity. Make sure to make it under the right temperature and humidity conditions so as not to affect the quality of the foam.

5. Mix evenly: Mix the glue and additives fully to ensure uniform distribution to get a better bonding effect.

6. Wax trembling at the bonding surface: Before using foam, it is important to ensure that the bonding surface is clean, dry and smooth. A proper repentant cleaner or sandpaper can be used for surface treatment to improve the strength of the bond.