How to wash car tires to be like new

Before washing the tires, prepare a brush with a long handle to be able to wash it deeply. When washing the front wheel, if you can turn the steering wheel left and right.

It makes it easier to wash all the places. If the tires are not too dirty, you can wash them with a general detergent instead of spending money on a special detergent. Unless there's really too much dirt, it might cost a little money.

Washing tires is not just done with a brush, of course, a brush is used, but not on a chrome mirror-treated rim.

This will leave a noticeable scar. The general rule of thumb is to use a sponge when washing large parts and a brush when washing small areas. For example:

Both sides of the tire can be brushed vigorously with a brush. As for some less obvious places, such as the underside of the fuel tank, exhaust pipe, etc., because they are not obvious, they are easy to be ignored, and they can be brushed vigorously with detergent and brush when cleaning.

The exhaust pipe can be cleaned with a sponge without the need for a brush. In the appearance of the car, as long as this part (the tire and below the knee) is cleaned, even if there are some small stains on the other parts, the whole car still looks bright. On the contrary, it is not so good.

So don't think that this part is not important, in fact, this part is the focus of the whole car cleaning.

Wash tires and wheels.

It is best not to use the tools of the steel rim with the tools for washing other parts. Because this part is very dirty, there is a high chance that some dust or small sand will remain on the tool. If you wash other parts of the body, it may cause damage to the body.

If you have to use the tools together, you must at least do the appropriate treatment before doing it, otherwise the scratches on the body will outweigh the losses.

Tire wax, also known as tire retreading agent or tire blackening agent, is divided into two types: liquid and paste. Its main function is to restore the original new look of the tire, prevent ultraviolet erosion, avoid rubber aging, cracking and discoloration, and effectively prolong the life of the tire. It can completely remove oil stains and dirt on tires, and has a protective effect to prevent tire hardening.

After spraying, the tire can return to its original black, smooth and bright without soil.

1. When cleaning tires, you usually need to prepare a brush with a long handle, which can be cleaned deeply, if the tires are not very dirty, you can scrub them clean with a little scrubbing, and you don't need to buy special detergents, just use general detergent cleaning liquid.

2. The brush should not be used on chrome-plated wheels, because this will leave obvious scars. Sponges can be used to wash the rims.

3. Use a sponge when washing large parts, and use a brush to wash small places, for example, you can use a brush to brush vigorously on both sides of the tire. As for some less conspicuous places that are easy to be overlooked, such as the underside of the fuel tank, exhaust pipe, etc., you can also use detergent with a brush when cleaning.

4. After cleaning, remove the residual foam with clean water. Use a sponge to suck out the remaining moisture and you're done.

When washing the car, the tire is brushed with loose dates, also known as tire blackening agent, that is, the tire looks black and bright after spraying, in fact, its most important role is to protect the elasticity of the tire structure molecules, so that the tire is more durable.

Automobile tires are one of the important parts of the car, which is in direct contact with the road surface, and the car suspension works together to alleviate the impact of the car when driving, and ensure that the car has good ride comfort and driving smoothness; Ensure that the wheels and the road surface have good adhesion; Improve the traction, braking and passability of the car; Bearing the weight of the car, the important role played by tires in the car is becoming more and more important.

Precautions. 1.To improve the understanding of tire safety, usually to check the tires, especially before the highway, must do a full and detailed inspection, in addition to the tire pressure delay cracks, but also to observe whether there are cracks on the side of the tire, tread wear conditions, found that hidden dangers should be eliminated in time.

2.Regularly correct the wheel balance, the wheel imbalance exceeds the standard, and high-frequency swing will occur at high speed, resulting in tire eccentricity, which is not conducive to driving safety. After the tire is repaired, the dynamic balance detection adjustment should be carried out, and the unilateral dynamic balance detection value of the tire should be less than or equal to 40 grams.

3.Regularly implement tire rotation, in order to maintain uniform tire wear on the same car, the vehicle should do a tire rotation every 5000 kilometers, and do a four-wheel alignment every 5000 10000 kilometers to avoid abnormal excessive wear of tires, and it is not allowed to install different models or tires with large differences between the old and new on the same axle. (Photo by photo:.)

Luo Ting1) NIO EC6 Xpeng P7 Marvel R VOYAH Free Audi A4L Model Y @2019

Summary. Hello dear! New cars tend to get dirty, not because of new tires.

The reasons are as follows: The reason why the new car is dirty may be because of the accumulation of dust or the stock car, the following is a detailed introduction and solution: Dust accumulation:

Most of the new cars in the 4S store are second-hand cars delivered by the owners or vehicles directly transported from the car factory, and because there are many of them, they will pile up for a period of time, and the vehicles are parked in the parking lot. It must be dirty for a long time, and there will be someone in the store to clean the car when you pick it up from the 4S store.

Why are new cars more likely to get dirty, and is it the reason for new tires?

I have a new car, an old car drives the same road, the new car is faster and dirty, what is the reason?

Hello dear! New cars tend to get dirty, not because of new tires. Here's why:

The reason why the new car is very dirty may be because of the accumulation of dust or the inventory of the car, the following is a detailed introduction to the method of reconciliation and concealment: the reason for the accumulation of dust: Most of the new cars in the 4S store are second-hand cars delivered by the owner or vehicles directly transported from the car factory, because the number is large, so it will pile up for a period of time, and the vehicle is parked in the parking lot.

After a long time, the hall must be dirty, and when the car is picked up from the 4S shop, someone will clean it in the store.

Kiss! A new car, you just came out of the 4S shop, the paint is basically not lost, and it has not experienced the wind and sun, it is definitely dirtier than the first volume of a Kai old car that has experienced the sun and rain for a long time. <>

The car has not yet been filmed, and when you drive on a dirty road, the outside of the body is dirty.

Dear, because the surface of your new car itself is very smooth, it is easy to fall dust, etc., it is better to put a car film or wax.

Dear, it is best to do a waxing treatment for new cars, which can protect the paint from scratching, and it also makes the body glossy higher.

Dear, even if you do waxing, you need to clean it often so that it is not easy to get dirty, and it is normal for the surface of the car to have ash after the rain.

The 4S shop said that it took a month to apply the film.

Dear, the new car just mentioned can not be filmed on the same day, and the film on the day will affect the license plate of the car later.

If the tire is dirty, it can be washed with water and brushed, as long as it is clean. After washing the car, drive out of the car to turn around twice, the water on the brake disc will dry, as long as the water on the brake disc can be dried, it will not rust, otherwise it will definitely rust.

If you want to wash it clean, then that small brush and bucket of water wash it yourself slowly. If you're not in the mood, rush it.

If you wash it at home, fill it with some laundry detergent and brush it with a brush, you can clearly see the dirt being brushed out, and then rinse it with clean water. It certainly doesn't have any effect on the brake discs, after all, the brake discs are commonly used.

Now you can use a special car wash tire foam to clean tires There are also special wheel cleaning foams, as long as you spray them, you can basically remove them without hands, and the effect is also very good, like 3M, Flamingo's tire foam cleaning agent Wheel cleaning agent, as well as Turtle tire foam cleaning agent Wheel cleaning agent is OK.

It is recommended that you first erode the surface of the tire with water, then spray the dirt remover on the surface of the tire, brush it with a brush for a few minutes, and finally clean it with water. Or spray tire brightener on it.

The dish soap is brushed in the rinse, and the brake disc itself is easy to rust, made of pig iron, which is normal. After a few brakes, it is gone. ，

Wash with dish soap and a brush and there is nowhere to hide the dirt. Remember to wash the mud and sand off the brakes.