Foam wall stickers, is it easy to clean when cleaning up in the future?

Recently, I plan to decorate the house, because the previous wall stickers were pasted a few years ago when they were renovated, and then the children were older, and the stickers were everywhere, and the stickers were okay, and sometimes they fell off after losing their stickiness, but the foam wall stickers really couldn't be dealt with, and the stickers began to turn yellow after a long time, and it looked like a patch from a distance, and it was ugly to die, and it was a headache to think about. Later, my colleague told me that this method would definitely clean it without damaging the wall, so I decided to give it a try!

The tape we usually use, and the foam wall sticker, it is easy to paste it, but after pasting something for a long time, it is difficult to clean it up, and even yellowing and oxidation, and sometimes it will fall off and fall on the ground It is also very sticky, at this time there is no need to worry, prepare some cooking oil to get it, we find a small bottle, not any bottle can be, we must prepare a spray bottle, you can buy it in the two-dollar store, and then we spray a few times on the part of the foam wall sticker that is difficult to tear off, and we must spray evenly, Otherwise, it won't work, after spraying, we don't care about it, let the oil soak deep into the rubber bottom, about 5 minutes or so, we will look again, this difficult part is easy to clean away.

With this method, you can also clean up the small advertisements at the door, as well as the paintings that the child sticks on the wall can be easily removed, if the glue is too sticky, the adhesion is relatively strong, then we have to use another method to solve the problem, we want to use acidic substances to corrode the rubber bottom, we can use two spoons of baking soda, add two spoons of dish soap, add three spoons of white vinegar, put the mixed cleaning water in the spray bottle, shake evenly for later use, spray a few times evenly on the parts that need to be cleaned, and then wait for a few minutes, and then clean upThese two tips can be written down, and they can also be used to clean up couplets and stickers stuck to the mirror, which is practical and convenient.

Very good to clean. Now there is a special cleaning agent, the effect is very outstanding, and it is also very convenient to use.

When it is cleaned up in the future, it is not very clean, mainly because of the coagulation, which is relatively strong, so when it is cleaned later, there will be a lot of mucus on it, and it will not be cleaned at this time.

It will be good to clean when it is cleaned, and we can take a bucket and roll it on the wall in advance. Then start shoveling with a shovel, which will be more convenient.

It's not easy to clean, and such things are particularly complicated when cleaning, and then they stick very tightly and firmly.

The foam glue on the wall can be cleaned with banana water, scrape off the surface of the foam glue with a small shovel with cement, and then dip the banana water into the foam glue with an oil brush, after 1-2 minutes, use a brush to brush in a circular way, and it can be easily removed by blowing with a hair dryer, and the foam adhesive can be weakened by blowing with a hair dryer.

Foam glue is a kind of rubber, which does not corrode the foam model, and has the effect of impact mitigation, heat insulation, and sound insulation.

Foam adhesive is widely used as thermal insulation, sound insulation, and shockproof materials, and is used in automobiles, aircraft, chemicals, daily necessities and other industries.

The foam glue that sticks to the clothes can be cleaned with toothpaste, and the foam glue that remains on the door can be scalded with boiling water.

1.Blow with a hair dryer. Use a hair dryer to blow on the remnants of the double-sided tape on the wall, open the high gear for a while, and when the double-sided tape is heated and soft, you can gently tear off the glue by hand.

2.Scrub with white flower oil. If you have white flower oil at home, you can find a cotton ball dipped in some white flower oil to erase the traces of glue.

3.Scrub with white vinegar. If you don't have white flower oil at home, you can find white vinegar and pour it into a spraying can, spray it on the wall with double-sided tape, so that the double-sided tape is completely soaked, and then you can scrape it off with your fingernails.

4.Scrape with a razor. Use a wide utility blade and tool clamp to grip the blade and slowly remove the glue.

Foam wall is a common decorative material, lightweight, meticulous depiction, good sound insulation effect, very popular with people. However, due to the special material, it is difficult to clean, and if the structure is accidentally damaged, special treatment is required. The cleaning of foam walls can be considered from the following aspects:

1.According to the different use occasions and the degree of dirt of the foam wall, different cleaning methods are adopted.

2.Start by vacuuming or using a soft brush to remove the dust, then wipe the foam wall clean with warm water and detergent. This is repeated several times until the stains on the foam wall are completely removed, and even high dirt can be cleaned with a professional cleaner.

However, be careful not to use materials such as organic solvents and acidic cleaners that can damage the foam wall. During the wiping process, be sure to be gentle and careful, and never use too much force to avoid surface damage.

3.Once cleaned, use a large towel or sponge to dry the foam wall vertically or diagonally until its surface is dry. However, it should be noted that the foam wall should not be exposed to the sun, or the service should not be directly dried with a hair dryer or fan, which will cause the foam wall to be deformed and damaged.

4.Avoid soaking the foam wall for a long time in water, which is not only easy to penetrate into it, let it chalize, but also destroy its aesthetics. It is advisable to use other fixed objects such as hooks on the foam wall and not to come into contact with moisture or moisture.

In short, cleaning the foam wall needs to be careful, cautious, and pay attention not to damage its material structure, so as to maintain its beautiful appearance and good insulation and sound insulation effect.

Use alcohol to remove it.

For waterproof coatings, cleaning the wallpaper glue with alcohol will not cause much damage to the wall, but the volatilization of alcohol can minimize the damage to the wall from cleaning. However, one thing to note is that the concentration of alcohol should not be too high, otherwise the volatility will be too large, and it is easy to make the white wall turn yellow or black, which is a very bad phenomenon.

Users can also use a hair dryer to blow the adhesive to soften it, which can weaken its adhesion and can be easily removed. If there are still small marks, wipe them off with polish remover that removes nail polish.