The carbon deposit of the car is killed again, how to break, and how to remove the carbon deposit of

The impact of engine carbon deposition on the car is still quite large, first of all, to reduce the engine power, that is, to make the power output uneven and gradually decay, in other words, more and more powerless. The second is to increase fuel consumption and increase your financial burden. The third is the difficulty of cold start, that is, the difficulty of ignition, and it is not easy to get on the car.

Finally, serious carbon deposition in the combustion chamber will also cause cylinder detonation, and there will be a sound of low-speed acceleration, which will cause damage to the piston and crankshaft, thus seriously affecting the safety of the car. Then there is the excessive discharge, which not only fails the annual inspection and inspection, but also directly aggravates the harm of polluting the environment. The specific principle is that if you do not pay attention to the oil and driving habits for a long time, the wax and gum in the gasoline will accumulate thicker and thicker, and carbon deposits will be formed when they harden after repeated heating.

If the engine burns oil, or if the gasoline is of poor quality and has more impurities, the valve carbon deposits are more serious and form faster. Because the structure of carbon deposition is similar to that of a sponge, when the valve forms carbon deposition, a part of the fuel injected into the cylinder will be adsorbed, which makes the concentration of the mixture that really enters the cylinder thinner, resulting in poor engine work, and abnormal phenomena such as difficult starting, unstable idling, poor acceleration, urgent refueling and tempering, excessive exhaust gas, and increased fuel consumption. If it is serious, it will cause the valve to be closed loosely, so that there is no cylinder pressure in the cylinder and it will not work completely, and even adhere to the valve to prevent it from returning.

At this point, the valve and piston will interfere with the movement, which will eventually damage the engine.

Hello, hang the bottle or dismantle and wash it,

The car can clean the engine carbon every 80,000 kilometers. And regular and vigorous throttle can remove carbon deposits from the engine。The benefits of cleaning up engine carbon deposits are that it can improve the power of the engine, reduce the fuel consumption of the car, and extend the service life of the engine.

1. The car can clean the engine carbon deposit once after driving 80,000 kilometers

Because the car in the process of long-term driving, due to the insufficient combustion of the engine combustion chamber, this will lead to an increase in carbon deposits inside the engine, so when the car travels 80,000 kilometers, the car engine should be cleaned and deposited, the advantage of this is that it can reduce the fuel consumption of the car, but also increase the power of the car, and at the same time can extend the service life of the car engine. However, when cleaning the engine carbon deposit, we must pay attention not to damage the cylinder block inside the engine, otherwise cleaning the engine carbon deposit will have no effect, but will shorten the service life of the engine, and will lead to the scrapping of the engine. <>

Second, often and vigorously hit the throttle, can effectively remove the engine carbon deposit.

Why many old drivers like to drive the car on the high speed, the reason is to eliminate the carbon deposits inside the engine, because after the car is on the high speed, the car owner hits the throttle greatly increased, so this can increase the speed of the engine, so that the carbon deposits inside the engine can be effectively removed, so it is good for the engine to often bang the throttle vigorously, and the carbon deposits inside the engine can be removed, and the carbon deposits inside the engine can be removed in this way It is also very good. <>

3. Summary

Generally speaking, the car can clean up the carbon deposits inside the engine every 80,000 kilometers, and the owner can also drive the car on the high speed, and increase the speed to about 100 yards to effectively remove the carbon deposits of the engine, so there are many car owners who report that after the car is on the high speed, the fuel consumption of the car is reduced, and the power has been improved accordingly, which is because the carbon deposits inside the engine are removed by vigorously bombing the accelerator. <>

Carbon deposits are generally cleaned up once every 2 or 3 years, and slamming the throttle can play a role in cleaning up carbon deposits, but the effect is not large.

Carbon deposits are generally cleaned once every 20,000 kilometers, and the throttle is often slammed, which can indeed have the effect of cleaning up carbon deposits.

At present, the gasoline additives on the market can be roughly divided into four categories:

1.Clean: When the vehicle clearly feels that the fuel supply is not smooth, the carbon deposits in the valve and fuel injector areas are serious, this fuel additive can be appropriately selected.

2.Curing type: The main function of this additive is to inhibit the generation of carbon deposits and ensure the normal operation of valves and fuel injectors.

3.Octane number adjustment: Octane number refers to the knock resistance index of fuel, for example, the octane number of No. 92 gasoline is 92; This fuel additive is mainly used to improve the octane of fuel to a certain extent, improve the quality of oil products, and can play a role in energy saving and emission reduction.

4.Comprehensive type: This additive is a combination of the characteristics of the above three products, and is a relatively advanced fuel additive, such as PNF stock solution.

To sum up, fuel additives do have a role, that is, people take supplements for the same reason, and the effect can be seen after a long time of use instead of two times. Therefore, it is recommended that if you want to make the positive omenate with fuel additives, it is good to insist on long-term use, which is good for the vehicle to reduce the formation of carbon deposits.

The residue of substances in the fuel injector, throttle gate, oil pipeline, spark plug, cylinder head, inner wall and other parts caused by insufficient combustion of gasoline in the cylinder, and then the black gum produced under the repeated high temperature action of the engine is called carbon deposit.

One of the reasons for carbon deposition is that the fuel is not completely burned and adheres to various parts of the engine, which can form carbon deposits over time. The main function of additives is to drill into the pores of carbon deposits with strong surface activity, destroy their structure, and gradually dissolve these carbon particles from the metal surface, and then discharge them through the exhaust gas after burning with the fuel at high temperature.

The increase in carbon deposits in the car will lead to insufficient combustion of the engine, resulting in an increase in fuel consumption and a long time when the car failure light is on.

Ways to slow down the formation of carbon deposits:

1.Use high-quality fuel. Because the main components of carbon deposits are wax and colloidal deposition in the fuel, the lower the colloidal content in the fuel, the better. But we can't change the quality of the fuel, but we can choose not to add unidentified cheap fuel.

2.Avoid driving at low speeds for long periods of time. If necessary, the high speed can be pulled at a regular time. The principle of removing carbon deposits at a high speed is to speed up the airflow, which can carry away a small amount of carbon deposits that are not firmly attached. The combustion temperature is increased so that part of the carbon deposits in the cylinder are burned.

Carbon deposition hazards. If the carbon deposits are not cleaned up for a long time, the internal channels of the engine will be blocked by carbon deposits, so that the engine power will deteriorate, and the occurrence of fuel consumption, abnormal engine noise, and unstable idle speed will occur, thereby reducing the power of the automobile engine, increasing fuel consumption, and causing the combustion rate to be too low. If you do not clean up carbon deposition in time, it will not only cause a certain degree of harm to the car, but also cause great harm to the environment, modern society pays attention to energy conservation and emission reduction, and exhaust emissions must not exceed the standard, so we should pay attention to this problem usually 5000 kilometers using effective PNF fuel additives to clean an overall oil circuit carbon deposit, and if you do not clean up carbon deposition for a long time, it will cause the operation of the whole vehicle, so that the internal channel of the engine is blocked by carbon deposition, and the internal fuel injection of the car is not smooth, so that the engine power becomes poor. As a result, the power of the automobile engine is reduced, the fuel consumption is increased, and the combustion rate is too low.

Carbon deposits can be removed in professional repair shops with walnut sand removal methods, or with big brand fuel additives. Carbon deposition is caused by incomplete combustion of the combustible mixture in the engine and is harmful to the engine.

The places where carbon deposits often occur in engines are the air intakes, valves, throttle valves, and combustion chambers.

If the carbon deposits leave the current combustion chamber, it will affect the compression ratio of the engine.

If the compression ratio becomes larger, it will affect the engine knocking phenomenon.

Knocking is an abnormal combustion phenomenon in an engine that occurs during a compression stroke.

When the engine is in the compression stroke, the intake and exhaust valves are essentially closed, and the piston runs upwards.

The upward movement of the piston can compress the combustible mixture, and the temperature and pressure of the compressed combustible mixture will rise substantially.

If the compression ratio becomes larger, the compressed combustible mixture may burn earlier, and the combustible mixture that burns Sun Yu will push the piston downward. At this time, the piston runs upward, which will affect the power output of the engine and the rationality of fuel.

Severe knocking can even affect engine linkage deformation or pistons**. Transport.

If the engine is damaged to this extent, the cost of repair is very high.

If there is a lot of carbon deposits in the engine, it needs to be removed immediately.

Millions of car purchase subsidies.

<> "How can carbon deposits be exhausted when cars produce carbon deposits?

Carbon deposition is mainly present in the combustion chamber, throttle and spark plug of the engine, and the engine carbon deposition is a very bad thing, because it will affect the fuel economy of the engine and the power performance of the engine, although the formation of carbon deposition cannot be avoided.

But how do you get rid of the car's carbon deposit? If you want to get rid of the carbon deposits on the engine, you can start with use and maintenance. Maintain the top.

On the one hand, the engine is cleaned regularly with cleaning agents, especially in the air intake tract and combustion chamber, which can be carried out with cleaning agents. In addition to these two aspects, regular maintenance of the vehicle and the use of low-viscosity fully synthetic motor oil to reduce the formation of carbon deposits. In the selection of gasoline oil products, nuclear transportation, regularly add some high-grade gasoline, will be purer, so that gasoline will burn more fully, but also reduce the formation of carbon deposits.

On top of the car, it is appropriate to pull the high speed for the vehicle. When the vehicle is at high speed, the engine is in a state of high load and high speed, and the engine vibration will be large, which will oscillate the carbon deposit, which will accelerate the combustion of the carbon deposit and achieve the exhaustion effect. In addition, as long as possible, let the engine idle running, when idling, the air intake is very small, and the gasoline combustion is not filled with side beams, which not only can not clean up the carbon deposit, but also accelerate the generation of carbon deposits.

In short, the prevention of carbon deposits is far more important than the later cleaning. As long as you pay more attention to driving, there is still a certain delay in the formation of carbon deposits.

It is normal for cars to generate carbon deposits, and after a certain number of kilometers, carbon deposits will naturally accumulate. The impact is that cold start is difficult, idle speed is unstable, fuel consumption increases, and the engine becomes louder.