What tools are used for tile wall punching? What are the precautions for tile wall punching?

You can use a percussion drill.

However, it also needs to be equipped with a proper twist drill to make the project smoother, most people will choose the tile drill bit, because of its excellent impact force, and the largest number of applications, can be applied to the full tile punching. It can also be equipped with an impact mason twist drill, which can ensure that the tile is drilled smoothly and at the same time the work rate is increased, and the floor tiles are rarely cracked.

Impact hammers, hammers and sample punches (can also be called round chisels). Nails (or cement nails if you don't have them), an oil-based marker and a measuring tool (to ensure the accuracy of the tile drilling. A more professional variable speed impact drill makes the control more and more convenient and fast, and can also improve the accuracy and ensure that the floor tiles are not cracked.

Matters needing attention when punching tile walls: When punching holes for all tiles, you must punch while draining water, and you need to punch when the floor tiles are cool. If the tile cracking is more serious, you can use whitening toothpaste to carry out repair, find a series of whitening toothpaste with the same color as the floor tiles, squeeze some, apply it evenly to the gaps, and then scrub the excess whitening toothpaste, wait for the whitening toothpaste to harden, and then you can hide the gaps.

Punch holes in the tiles to expand the screws.

Nailed, should be based on the size of the anchor bolt, choose the total width of the punch. When punching holes in tiles, water seeps while opening holes to prevent the holes from getting hot and causing the tiles to crack. If a tile is cracked when it is drilled, it can be repaired in anticipation of the crack.

Just a few small gaps will not affect the use of structural adhesives.

Add joints, which can avoid blackening of the gaps and make the floor tiles more and more unsightly.

When opening holes, be sure to apply sealing tape to the surface of the tile, because this can prevent the enamel on the surface of the tile.

When drilling, the twist drill deviates, causing the floor tiles to crack, and it can also prevent the twist drill from leaving the perforated part and scratching the surface of the floor tiles.

The above related ceramic punching tips, tile wall punching needs to pay attention to all the professional knowledge will be introduced to you in detail here, because in the process of decoration, it is impossible to avoid opening holes, so if you are worried about your lack of technical expertise.

If so, then we can ask professional staff to help open the hole, and we must try not to open the hole, otherwise it will have serious consequences.

The tools used to punch holes in the tile wall include electric drills, impact drills, or electric hammer impacts; If the cracking of the tile is serious, it is necessary to use toothpaste to repair, and the toothpaste with the same color as the tile is squeezed out evenly to wipe the gap, and then wipe the excess toothpaste, and wait for the toothpaste to dry out and hide the gap.

If the tile wall is drilled, a drill is also used to punch the hole, because in this way, the damage to the tile will be less and have a better effect.

Tools for tile drilling have drill bits, which can be percussion drills, electric hammers, and corresponding drill bits. The usage of different drill bits is different. Ceramic drills* ceramic tile drills, ceramic glass drills. * Use hollow tubular diamond drill bits, followed by tile drill bits such as bow arrows.

Drilling holes and openings in the tiles need to be prepared: pistol drill, clean water, drill bit, the specific method of operation is described below:

1. First take out the prepared tools for later use, as shown in the figure below.

2. Then install the appropriate drill bit on the pistol drill, and drill on the tile for a while, as shown in the figure below.

3. The drill bit needs to be cooled in clean water again, as shown in the figure below.

5. Finally, the hole is made on the tile, as shown in the figure below.

There are hole openers specially used for drilling holes in ceramic tiles, which are generally sold in building materials stores, for a few dollars a piece. Clip it to the hand drill to make an eye, and it won't damage the tile.

You can buy a drill bit that specializes in drilling glass, you can use an ordinary electric drill, and add some water when drilling.

The small electric hammer is beaten slowly, and the effect is better when adding some water appropriately.

Tile punching is a common thing in decoration, but giveTile punchingIt is a technical job, not everyone will play, because if you are not careful, the perforated tiles will crack, affecting the appearance, and the tiles will be replaced in serious cases, so I will bring you belowTile punchingFirst, the method of tile punching.

1. Prepare the following tools for tile drilling, lithium electric hammer, glass drill bit, water, cement nails, and sealing glue.

2. Select a suitable position on the punched tile, and also check whether the tile has a hollow drum phenomenon to avoid punching holes on the hollow tile.

3. Before punching the tile, now paste the sealing glue on the tile, which is conducive to positioning the punching position and preventing the tile from cracking.

4. First use a cement nail to chisel a small point on the position of the tile punching, which can prevent the drill bit from slipping when punching.

5. When preparing to punch, first adjust the electric hammer to the flat drilling mode, and then turn on the switch, and the flat drilling mode rotates slowly when drilling, and then drives the hole in.

Second, the precautions for drilling holes in the tile wall.

1. When punching holes for the whole tile, you need to add water while punching, and you can only punch when the tile is cool.

2. If the tile cracking is serious, you can use toothpaste to repair it, find a series of toothpaste with the same color as the tile, squeeze out some, evenly apply it to the cracks, and then wipe the excess toothpaste, wait for the toothpaste to dry, and then you can hide the cracks.

3. If the tile is drilled for expansion bolts, the width of the drilling hole should be selected according to the size of the bolt.

4. When punching tiles, dripping water while punching holes can prevent the punching heat and cause the tiles to crack.

5. If there is cracking when the tile is punched, it can be repaired according to the imagination of cracking. If it is just a few small cracks that will not affect the use, you can use glass glue to add the joints, which can avoid the gaps from becoming black and can also make the tiles unsightly.

6. When punching, be sure to paste the sealing glue on the surface of the tile, because this can prevent the enamel on the surface of the tile from slipping when punching, causing the tile to crack, and can also prevent the drill bit from leaving the drilling position and scratching the surface of the tile.

Summary: It is not easy to make holes in hard tiles, and there are some skills that should be mastered before punching holes, so that they can be avoidedTile punching