If a large glass of water is sprinkled on the solid wood floor and not dried in time, will the surfa

1. On-site inspection.

Sports wood floor maintenance staff, or stadium staff, when they find that the sports wood floor is soaked in water after work, don't panic first, be calm. Inspect the soaking site at the first time to eliminate potential safety hazards, such as whether there are wires, electrical appliances, flammable and explosive materials on the soaking floor, etc.

Then according to the degree of water immersion of the sports wood floor, a solution is formulated.

2. Soak in water lightly.

If the sports wood floor is lightly soaked, the lightly soaked and damp floor can be wiped dry and ventilated. If necessary, disassemble the sports wood floor to observe whether there is water on the ground and observe whether the floor is obviously deformed. If so, it needs to be removed and dried, and reinstalled.

3. Heavy soaking.

Sports wood flooring that is seriously damp or soaked in water for 30 minutes will be deformed, expanded, and lost its luster. Such sports wood flooring is basically scrapped and should be replaced, and attention should be paid to removing the moisture under the floor and drying it.

4. Precautions.

After the sports wood floor is soaked in water, it is important to pay attention to the fact that it cannot be blown by hair dryer, exposed to sunlight, or dried, which will accelerate the serious deformation and damage to the surface of the sports wood floor of the basketball hall.

Generally speaking, there will be no problem, because as long as it meets the standard, the solid wood floor itself still contains a certain amount of moisture in the wood, and it is normal to expand and contract in dry and humid weather.

During these two days, you can strengthen the ventilation of the city, speed up the flow of water vapor, and the floor should not have too many problems.

Summary. Hello dear, you handled it in a timely manner. If you're not sure, you can do it

Apply a dry rag to quickly absorb the moisture on the surface of the floor, and then use a vacuum cleaner to suck the moisture away from the joints of the floor. If the flooding area is not large, you can turn on the hair dryer to the cold air setting to dry.

If you accidentally spill a large glass of water on the solid wood floor, although you will immediately wipe off the surface water, there should be water seeping through the cracks, will it rot or.

Hello, dear, you handled it in a timely manner. If you don't feel at ease, you can do this: use a dry rag to quickly absorb the moisture on the surface of the floor, and then use a vacuum cleaner to suck the water vapor away from the splicing gaps in the floor.

If the flooding area is not large, the hair dryer can be turned on to the cold air gear of the chain to dry.

And generally speaking, there will be no problem, because as long as the solid wood floor itself meets the standard, there is a certain amount of moisture in the wood branches, and it is normal to expand and contract the foundation of the hall in dry and humid weather.

Remove the baseboard to expose the expansion joint Laminate flooring is not as delicate as solid wood flooring, if it is partially immersed in water, the surface water on the floor should be sucked dry in the shortest possible time, if it is a small area of soaking water, it is recommended not to pry up the laminate floor to dry, which is easy to cause hard damage to the laminate floor, and is likely to cause serious consequences that cannot be restored. It is best to quickly remove the baseboard of the floor, expose the expansion joint, and rely on the expansion joint to dissipate the water vapor, depending on the amount of seepage water, it usually takes about 3 to 10 days to dry. At the same time, you can also use a vacuum cleaner to absorb water vapor in the splicing gap of the soaked floor, or use a hair dryer to dry it with cold air, but do not use hot air to prevent the surface from drying and cracking due to heat and drying.

If it is a large area of water, you need to contact the floor customer service. Wait for the floor to dry naturally When the composite floor encounters water, the first thing is to deal with the stagnant water, leave the water under the floor alone for the time being, the most important thing is to keep the ventilation to dry it naturally, and be sure not to dry it with a hair dryer. If you remove it, the floor will be deformed, so in order to dry the floor as soon as possible, you can remove the door buckle strip, and if it is convenient, you can also remove the baseboard, so that the water can evaporate as soon as possible.

If you find a bulging place, you can press it with a heavy object first, wait until it is completely dry and then take it off, and wait patiently for it to air dry. Re-paint and wax The solid wood floor has a small area of water, and the water vapor can be sucked out with a high-power vacuum cleaner, but the surface paint is damaged after the expansion of the water in a large area.

No way. If it is a solid wood floor, ask the master carpenter to come and plane and repaint, and you may be able to settle it. If it is a strengthened board, then it will be used, and it will not be used, so replace it with a new one.

If the drum is too much, find a carpenter to repair it, if I can help you in Beijing, I am a professional wooden floor for several years.

Let the professional workers and masters lift it up and blow it dry, and it should be no problem.

The wooden floor is soaked in water and needs to be removed and dried overhead.

After the entire floor has dried, the floor is dried and then paved back so that it will not be damaged.

If left like this, the wooden floor will absorb moisture and the bottom will be prone to mold;

Moreover, it will be deformed and arched under the influence of thermal expansion and cold contraction.

Same-living flooring Hope that helps

According to the situation you said and the observation of **, there will be no major problems, and there will be no major deformation around it in a few days, there should be no problem, but be careful not to repeat the blisters.

You've blistered, the floor is deformed, and it's almost impossible to get it back to its original shape. Once the floor dries in a few days, it will definitely warp.

Although the wooden floor has been soaked in water overnight, the surrounding area has been bulging, and there will be warping in a few days.

The deformation of the wooden floor depends on the material of the floor, and the general solid wood or MDF veneer is easy to deform, and it will be better to let it dry slowly after treatment.

If the floor was soaked overnight, it was at this level today, but it still didn't work, there was already water inside.

It should be possible to warp, but not necessarily in a few days, it may be a month and a half in a month, and so on.

The wooden floor will be like this when it is soaked in water, and it will warp after a few days.

There is no way, it has been too long, it has been scrapped.

Sports wood flooring is soaked and swollen by water: sports wood flooring is water-abore, and the sports wood floor after being soaked in water is easy to swell and deform, which directly affects the use of sports wood flooring. Generally, when encountering this kind of problem, do not remove the wooden floor without permission, and contact a professional wooden floor installer to repair and deal with it according to the soaking situation.

Depending on the degree of soaking, the treatment is also different.

1. How to deal with the blister of the solid wood floor.

The first thing to see is whether the blisters are severe. If it is a small area of water soaking, it will not have much impact on the whole room. Wooden floors should be shaded as soon as possible after being blistered.

However, local soaking will not have much impact on the whole room, you can suck the surface water of the wooden floor dry in the shortest possible time, a small area can be sucked away with a vacuum cleaner in the splicing gap of the soaked wood floor, or use a hair dryer to dry it with cold air, but do not use hot air to blow to prevent the surface from drying and cracking due to heating and drying.

The soaking area is relatively large, you can consider using air conditioning to dehumidify, close the doors and windows of the room, and turn the air conditioner to the lowest temperature, most of which can dry out in about a day.

2. If the wooden floor is seriously soaked in water.

This should be done in the shade while keeping the floor from deforming. If there are conditions, you can clean up the site, and it is best to let professional after-sales service personnel come to deal with it, mainly because the material is different, and the treatment methods of solid wood flooring and laminate flooring are also different.

If the solid wood floor is soaked in water in a large area, the after-sales service office of the wood floor should be notified in time, the wooden floor should be carefully pried up, and the water on the surface of the floor should be dried as soon as possible, and then stacked according to the "well" shape, and the weight generated by the superposition should be used to prevent deformation. When placing the floor, pay attention to the reverse side of the floor to prevent the surface from drying out due to rapid drying, and pay attention to not being exposed to the sun, it should be placed in a ventilated place to dry, and after one to two weeks, depending on its recovery, then decide whether it can be used again.

No, the wooden floor is generally equipped with some moisture-proof.

Not necessarily, there are many reasons for floor wrapping common ones are:

First, the seams are bulging.

1. Progress of the floor surface: During the installation process, it is inevitable that sometimes the glue does not completely fill the joints. If the mop drips while mopping, it will cause water to accumulate on the surface of the floor and enter through the joints with less sizing, and the floor substrate will absorb water, resulting in local expansion and blistering.

In this case, the joints on the surface of the floor are partially bulging;

2. Water inflow and bulging under the floor: the surface phenomenon is that the shape of the seam bulge is more uniform, the place near the water source is heavier and stricter, and the far place is more and more flat. The places where such problems arise are:

Close to restrooms, kitchens, heating pipes, air conditioning condensate outlets, windows, etc. If the flooding time is long and the surface phenomenon is no longer obvious, you can open the floor to check whether there is a watermark to determine the cause;

3. Drum of short joints on the floor: It is manifested as the bulging of each short seam of the long floor, which is usually caused by too heavy moisture on the ground. The higher the bulge, the greater the moisture on the ground.

Repair program: replacement of the floor.

Second, the arching of the floor: the performance phenomenon is to step on the sense of suspension, and some places will be more serious.

1. The expansion joint is not reserved enough, so that the floor is arched;

2. The room is paved: when the floor is installed in more than two rooms, the door sleeve is not equipped with buckles, and the floor of the two rooms is stretched horizontally when the humidity and moisture are larger, causing the door of the room to pull each other and make the floor arch;

3. The expansion joint is nailed by the baseboard or filled with plaster, putty, etc., so that the floor cannot be stretched, resulting in the arching of the floor;

4. During the installation process, there are foreign objects left under the floor, resulting in arching;

5. The base layer under the floor is arched, such as the original ground has a solid wood floor before the installation of the floor, and the original floor is arched due to the moisture of the original floor after the floor is installed;

Maintenance plan: lift and lower the baseboard and reserve the expansion joint again; Install buckles at the connection between the room and the room; Reinstall the baseboard and clean out the reserved expansion joints such as plaster and putty; Lift the floor and reinstall it; Remove the floor, level the floor, dry it and re-pave it.

Generally, the wooden floor will only bulge when a large area is damp, and a little water will not.