The floor tiles are uneven, do you have trouble again?

First, the cause of uneven floor tiles

1. Illegal operation of construction personnel

In the process of use, some workers will not pave in accordance with the direction of the arrow on the back of the tile, which will lead to the overall unevenness of the tile after the completion of the paving, so when paving at the beginning, it is necessary to check whether the worker is paved in accordance with the direction of the arrow.

2. Seamless paving

Seamless paving is indeed beautiful, but the pursuit of beauty should also pay attention to quality. When laying tiles, the owner requires workers to adopt seamless paving, and unevenness will definitely appear in the later stage. You must know that it is taboo to stick tiles without leaving seams!

3. Do not do pre-arrangement before paving

Here take parquet tiles as an analogy, paving collage tiles must be pre-arranged in advance, if mixed together, not only will be crooked, but also may be uneven.

4. The quality of the tile itself

In the process of transporting tiles, the packaging is not tight may deform the tiles, and the workers did not find that the tiles have flatness errors when paving, and the paving is naturally uneven after completion.

5. Suffocate the shrinkage of the inner wall tile paving

Some walls are not vertical, one is high and one is low, and the inner wall tiles are paved and shrunk after the tile is paved, and it is uneven after a few minutes of paving, which still needs to solve the problem of tile shrinkage.

Second, the uneven repair skills of floor tiles

1. Before construction, workers are strictly required to construct in accordance with the specifications, and they can check it themselves. The tiles should be paved in the direction of the arrow on the back, and there needs to be a gap between the tiles and the tiles.

2. Check whether the tiles are deformed after entering the site.

3. If the tile is found to be uneven just after it is paved, you can press it with a bucket or brick and other heavy objects for a night before the cement is dry, and it will improve every other day. Serious unevenness is recommended to use some wooden dragons to resist the unevenness of the ground tiles when the cement has not solidified, and the other end to the roof.

4. For the shrinkage of ceramic tiles, you only need to add a little fine sand to the cement when paving, and then add 801 glue and water to mix evenly. There will be no shrinkage problems.

Third, the remedy for uneven floor tiles

1. If the cement has not dried, you can use a wall knife to beat it until it is the same level as other bricks.

2. If the cement has dried and there are only a few uneven tiles, take out these uneven tiles, and then pave the tiles back to their original position after the final base treatment.

3. If there is a large area of uneven floor tiles, it is recommended to rework it.

It's a lot of trouble, and it's the equivalent of redecorating, so it's very troublesome, and we need to move because there is some bad smell

It is very troublesome, and it is a big project, and it also costs a lot of money, and it also has to face the situation of moving, so it is very troublesome and unreasonable.

It is very troublesome to re-do it, so be sure to let a professional person sort it out when you make it.

Troublesome. Because if you do it again, you have to move everything out of the house, which is quite troublesome.

Floor tilesIt is very troublesome to rebuild the unevenness, and it is not easy to pick up the floor tiles without breaking them, which requires great skill. And if it has been renovated for many years, the cement under the floor tiles has been solidified. It's not easy to open at all.

So at this time, this floor tile must be smashed off. If it is just renovated, the cement has not dried thoroughly, and it is still easier to open.

At this time, it is unlikely to destroy the floor tiles. However, it is not an easy task to re-level. It has to be a very skillful bricklayer to do it. Now the decoration will use the level.

The level is still relatively accurate. Otherwise, if you only look at it with the naked eye, the hole will be different, and the whole house will be different in height.

If it is not that old, you may be able to buy the same tile, but if it is very old, the same tile will not be found at all. So if one tile is broken, the whole house will be very inconsistent. At this time, it is better to smash all the tiles and redecorate.

Of course, there will be a lot of material damage in this way. For example, it takes a labor fee to smash the tiles, and then it takes a lot of money to buy the tiles, and it takes a lot of money to re-lay them. Therefore, redecoration is also a particularly expensive project, but in order to look pleasing to the eye, some people will also redecorate.

Ceramic tiles are still relatively strong and durable. It's not like the floor will be hollow over time.

Therefore, many people now use ceramic tiles for decoration, and now the tiles are very exquisitely made, and they are all marble patterns and colors. Nowadays, people generally choose tiles to pave throughout, because in this way the style of the whole house will be unified, unlike in the past, there would be door stones at the entrance to the door.

and so on, all of them are now all shops. There are many types of tiles, choose some good quality tiles, can be used for a longer time, and will not be easy to crack.

It's still more troublesome to redo it, because you have to dismantle this again. Then re-lime can be used to start making new ones, which is very time-consuming and cumbersome.

Of course, it is very troublesome to rebuild, because if one floor tile is uneven, you need to get all the floor tiles up and rebuild it.

Of course, it is troublesome to rebuild, because the removal and relayout of floor tiles are very time-consuming and labor-intensive.

The newly paved floor tiles have individual or partial tile unevenness, which is really annoying, so how to deal with the uneven floor tiles? Let me take you to find out, I hope it can help you.

1. Trample on the condition that the tile is not dry after pasting, resulting in the tile sagging. You can ask the decorator to help you gently beat it back to leveling. If there is a lot of sagging, it can be removed and repaired again.

2. If the tiles are completely solidified on the ground, they can only be broken and taken out with tools, then filled with cement, and replaced with new floor tiles.

3. In the case of large-scale unevenness, it is difficult to correct the local compensation, so it can only be restarted. Be sure to find a professional floor tile master, the effect of the paste is really different, whether it is durability and aesthetics.

Uneven floor tiles often affect our quality of life, and if they are not repaired for a long time, the closed belt may also bring danger to us, especially the elderly and young children, who are prone to fall accidents. So, how to deal with uneven floor tiles?

1.Find out the unevenness: First of all, you need to find the uneven area, so that you can repair it in a targeted manner. You can discern what is more uneven by touching, visually or even listening to it, and then record them in preparation for subsequent restorations.

2.Develop a remediation plan: According to the degree and area of unevenness, formulate a suitable remediation plan. If it is only a local unevenness, it can be filled with cement mortar or a special floor caulk. If it is a large uneven area, it is recommended to re-lay the floor.

3.Prepare the materials for restoration: According to the developed plan, prepare the materials required for restoration, such as cement, mortar, floor caulk, etc.

4.Clean the reed surface of the sedan chair: Before starting the repair, you need to clean the ground and clean up the original dust, debris and other debris to ensure that the ground is dry and clean.

5.Start Repair: Perform the repair work as required by the scenario.

If it is repaired with mortar, you can first use a brush to evenly apply the mortar to the ground, and then use a scraper to trim it. If you are using floor caulk, you can pour the caulk directly into the gap and finish it with a scraper.

6.Once the repair is complete, you need to wait for a while for it to dry. If you lay a new floor, you need to pay attention to the material, color, and thickness of the flooring to be consistent with the original flooring.

In short, uneven floor tiles are a problem that needs to be dealt with in time, if you don't know how to repair it, you can ask professionals to help, so that the effect is more guaranteed.

Uneven floor tiles are a common problem in home renovation, and if not dealt with in a timely manner, it will affect the aesthetics and increase the risk of falling. Here are a few ways to deal with uneven floor tiles.

1.Adjust the ash seams.

If the gap between the floor tiles is uneven, you can add the corresponding cement to the gap to adjust the depth and width of the ash joint to make the tile surface flat.

2.Fill the gaps.

If the floor tiles have problems such as cracks and missing corners, they can be leveled with special filling tools. These fillers can firmly fill the gaps and level the ground.

3.Mortar heightened.

If the height of the floor is not calculated during the tile installation process, mortar can be used to heighten the floor after installation. First, apply the mortar evenly to the low place, and then press the floor tiles against the mortar to tamp evenly. After waiting for the mortar to dry completely, use sandpaper to sand the surface flat.

4.Replace the floor.

If the uneven floor tiles are too serious, you can consider removing the bricks and reinstalling them. When removing tiles, it is necessary to be small and dusty to avoid damaging the surrounding tiles. When reinstalling, you need to lay a thin layer of mortar on the ground and then install the tiles to ensure that the ground is level.

Uneven floor tiles are a very annoying problem. If it is not treated in time, it will affect the beauty and safety of the ground. The above methods can solve this problem, but if you are not sure how to deal with it, it is best to ask a professional to deal with it.

Uneven floor tiles are one of the problems we often encounter when renovating our house. If left untreated, it will not only affect the aesthetics, but also affect walking safety. Therefore, it is crucial to deal with the problem of uneven floor tiles.

Below, let's discuss how to deal with uneven floor tiles.

Method 1: Re-lay the floor tiles.

If your uneven floor tiles are a serious problem, then relaying the floor tiles is the best solution. Resurfacing floor tiles requires professional skills and tools, and new floor tiles need to be purchased, so the cost will be relatively high.

Method 2: Dry and grind the floor tiles.

If there are some protrusions on the floor tiles, you can use sandpaper, grinding stones, or other abrasives to smooth them out. The same can be done for floor tiles that have some visible wear or scratches.

Method 3: Fill or change the underlying material.

Some floor tiles are uneven because the material at the bottom of the ground is uneven or not firm, and the problem can be solved by filling. First of all, all the bricks on the floor are dug up, and then the bottom layer of the ground is smoothed and firm. Then put the bricks back in place, making sure that the gaps between the bricks are of different sizes.

Method 4: Add padding material under the stacked bricks.

It is an easy way to add reinforcing pad material to the lower part of the floor to solve the problem of uneven flooring. Lay a mat under the floor and add another layer of sealant on top of the bricks until there are no gaps between the tiles.

Method 5: Use wooden planks to pad uneven areas.

Sometimes the uneven bottom of the floor is due to a defect in the material at the bottom of the floor, and the solution is to add wooden planks to the uneven place to fill the uneven floor. First, lay out the pants and make a good mat, then lay a wooden plank on the uneven ground and hammer it into the ground. This way the bricks can be placed evenly on the board.

In short, if your floor tiles are uneven, it is necessary to deal with them as soon as possible to ensure the beauty and safety of the house. At the same time, dealing with the unevenness of floor tiles requires the selection of appropriate methods according to the specific situation to achieve the best results.

Summary. 1.If the floor tiles are only partially uneven, we can remove these tiles and replace them with new bricks.

In the early stage, we must do a good job in the treatment of the base, choose the adhesive, apply it to the back of the tile, lay it on the ground, and have an uneven floor tile that needs to be re-done.

1.If the floor tiles are only partially uneven, we can take these floor tiles off and replace them with new bricks. Before the regret period must do a good job of the treatment of the base, choose the adhesive, apply it to the back of the tile, lay it on the ground, 2

If the scale is a large area with a high degree of unevenness, it needs to be completely eradicated and then reworked. If the cement has not yet solidified, you can use some lead to resist the uneven position of the ground made by the tile skin, and press the roof of the house at one end, which will also be effective.

The floor tile is uneven, that piece is uneven, and now there are special tools to get it out, which will not affect the tiles next to it.