Why can floor tiles be used on walls but wall tiles cannot be used for paving?

The cutting and laying of floor tiles has a better effect, but the labor cost is expensive. Some of the houses in my neighborhood are paved. When choosing floor tiles, pay attention to the color of the section.

Wall tiles can be laid first and then laid. The advantage of laying floor tiles first is that the joints between the wall and the tiles are on the wall, and the aesthetics are better. However, the disadvantages include laying the floor tiles first, and waiting for the tiles to dry before they can be pasted, which increases the construction time.

Secondly, if the floor tiles are laid first, the finished floor tiles are easy to scratch during construction, and the finished product needs to be protected.

Generally speaking, there are many advantages to sticking wall tiles first, which can reduce the difficulty of construction, reduce the hollowing of the lower wall tiles, and shorten the construction period. So when decorating, you don't have to worry about which one to shop first and which one to shop later. No matter which one is laid first, the impact is not great.

Hope the above can be helpful to you. The standards for wall tiles and floor tiles are not the same. You should know that wall tiles should have a higher water absorption.

As with floor tiles, you just need to choose one that is more resistant to wear, but when you stick it in the same place, the colors should match well.

We all know that wall tiles are used on walls. The focus of wall tiles is to play the role of decorating the wall. And this kind of tile will have a high water absorption, and then you will have better floor tiles in terms of wear resistance.

Wall tiles are mostly used for decoration. The most important thing is that there are many styles, and then the color and other aspects are not bad. Like floor tiles, we all know that it is a decorative material laid on the ground, but when choosing, it still depends on which area you use.

Different regions have different requirements, but wear resistance is a must, and the prevention and control performance must be good.

After the wall tiles in the bathroom are pasted, if they are incorrect, it may be that you have not corrected them during the meal, so you must pull the line when pasting, so that the effect of sticking will be the best. It will not affect the aesthetics of the later stage. If the seams are found to be misaligned in the later stage, it will be more troublesome to operate, and the return will be a waste of time.

If you like it, you can like and follow! After we test the method with a high pass rate, I hope mine can help you, and I also hope you can help me**, like, support me more, and follow me more. If you have any questions and requests, you can leave a message in the comment area, and I will reply one by one.

Because the bricks on the wall are not practical, not hard enough, too smooth, and can easily break, they cannot be used.

It is because of the quality of the wall tiles, if the strong acid is paved, it is easy to be unable to withstand the force and it is easy to break.

Because the quality of the wall tiles laid on the ground will be particularly bad, and the laying on the ground will also be cleaned up, which is particularly troublesome, particularly difficult, and the observability will be particularly poor.

Mainly because the hardness of the floor tile is enough, whether it is attached to the wall or the ground, there is a certain pattern on the wall tile, and the smoothness is relatively high, not suitable for paving.

No. It is easy to fracturing the tiles, which affects the overall effect of the tiles on the side.

If you want to build the wall directly on the tile surface, it is best to use lightweight materials, and the wall needs to be thinner to avoid the wall being too heavy to cause the tile to be unbearable and crack and collapse. In addition, the contact surface between the wall tiles and the tiles needs to be haired to prevent slipping.

From a professional point of view, it is not advisable to build a wall on the tile, because the surface of the tile is relatively smooth, the adhesion between the cement is limited, and the load-bearing is also limited, so the wall will not be strong enough, and there is a hidden risk.

Walls can be built on floor tiles, but the following points need to be noted:

1.The wall should be firmly fixed: When building a wall on the floor tiles, you need to make sure that the ground is firm and stable. If the floor tile floor is uneven or not firm, the wall is prone to tilting, cracking and other problems.

2.Consider the weight: The weight of the brick wall is relatively large, if the wall is too thick or too high, it may cause excessive pressure on the floor tiles and affect the safety factor of the ground, so it is necessary to evaluate the weight of the wall and the bearing capacity of the floor.

3.Choose the appropriate brick wall type: When building walls on floor tiles, you need to choose the appropriate brick wall type, such as lightweight partitions, thin plate brick walls, etc., which have the characteristics of light weight and easy to build.

4.Installation section excitation level: Before building the wall, use a spirit level to detect whether the corner of the wall is vertical and whether the wall surface is horizontal. This is to ensure that the weight of the wall is evenly distributed and to avoid the situation that could cause the wall to tilt to one side and damage the floor tiles.

To sum up, it is possible to build walls on floor tiles, but it is necessary to consider the flatness and stability of the ground and the weight of the wall, choose the appropriate wall type, and ensure the installation level of the brick wall. It is recommended to find a professional bricklayer or a construction team to carry out the construction.

Hello dear<>

Because the surface of the floor tile brick is too smooth, the wall is built directly on it, which will lead to the weak contact between the wall and the ground, leaving potential safety hazards. No, in case of laying on the empty floor, the risk factor is very high, in order to speed up, it is best to get the floor down, if you don't want to replace the entire ground tile in the case of a new partition wall, you can use a cutting machine to cut the ground tile at the position of the wall, and then chisel to remove, and then build the wall, at the same time, it should be noted that the wall should be done horizontally and longitudinally planted with reinforcement. The user's point of view is definitely not good!

1.The surface of the floor is smooth, and the cement of the brick does not stick to it, so that the bottom layer is not solid, that is, the foundation is not good! 2.

The floor is made of wood, which will produce thermal expansion and cold contraction under the influence of temperature, which will affect the stability of the later stage; It is recommended that you can make a light steel keel gypsum board partition, which is simple to construct and low in cost! If you are worried about not being soundproofed, you can add rock wool and use double-layer gypsum board veneer (if tiled, you can use cement board and barbed wire to deal with) User point of view Although the bonding between the floor tiles and the wall is estimated to be not very strong, if you can ensure that the two facades of the wall can be firmly connected with the connected wall, and the top of the wall and the ceiling can also be firmly connected, it is also possible.

With the development of the trend, the wall on the block has now become a more popular way to decorate, many residents will be recommended by the shopping street as a block when purchasing materials, which can be used for TV background walls, sofa walls can be decorated on the wall, and some can be used for kitchen and toilet walls. However, in the past two days, friends have been asking questions. Should we take advantage of the epidemic and spread the block?

Therefore, we asked a lot of senior civil engineers.

Let's understand first: the specifications and characteristics of floor tiles in home decoration must be the height of wall and floor tiles, after all, floor tiles are the main carrier, and the material type, color combination and pattern style of floor tiles in the market can choose a relatively large space. Therefore, the wall on the floor tile is more prominent than the decorative effect of the general wall tile, and the relative size of the floor tile is larger and the joints are few, which is convenient for cleaning and repairing in the later life.

The role of floor tiles is mainly to carry operators, so he is relatively large wall tiles! And in terms of practices, there are really a lot! Therefore, the effect of tiles on the wall is that the bricks of the general wall are much better looking, and its size is much larger than the bricks of the wall, even if you start cleaning, it is relatively simple and convenient, because it has fewer joints.

The bricks are made of pottery and absorb about 10% of water. The tiles are made of porcelain and absorb only 1% of water. The floors of the toilets and kitchens are covered with tiles with low water absorption.

These two places are often washed with water.

The materials used in the bricks are different, the former is made of pottery, the latter is made of porcelain, the craftsmanship is not much different, in this sense, the degree of water absorption is different. The block absorbs 10 times more water than the tile. Toilets and kitchens are often in contact with water and need to be cleaned with water, so of course it is better to choose tiles that do not absorb well.

The tiles on the wall are stronger on the wall. Therefore, these two bricks should not be used indiscriminately. If you don't, you'll be in trouble.

If you really want to put tiles on the wall, you must first ask the master to come to the house to look at the walls, etc. The master is suitable for tiling, if it is not suitable, it cannot be pasted like that.

The main reason is that there is a big difference in the water absorption rate between the two, and the physical characteristics are also very different. The main reason is that the water absorption rate of wall tiles is too high, and it is not easy to clean the floor.

The wear coefficient of wall tiles and floor tiles is not the same, wall tiles are not wear-resistant, generally relatively thin, and it is very easy to break on the ground.

Wall tiles belong to pottery, if they are laid on the ground, they will cause a very high water absorption rate, water marks, and there is no way to prevent slipping.