How do I move a lit alcohol blowtorch?

Bring appropriate protective measures (e.g. gloves...)

Just move it away.

However, the temperature of the alcohol blowtorch is very high, so it is recommended not to move it easily.

There are two types of common alcohol blowtorches: hanging type and seat type. Here's how to use each of the two blowtorches correctly.

1. Hanging blowtorch: This blowtorch relies on the pressure difference generated by the alcohol container hanging at a high place to work, before use, you must carefully check the switches and delivery hoses, if there is leakage, you should check the switches and delivery hoses. Then turn on the container switch first, and then slowly unscrew the switch of the lamp body to observe whether the fountain phenomenon occurs.

Yes, it means that the blowtorch pipeline is unblocked and can work normally. None, or the phenomenon is not obvious, it means that the pipeline is blocked, and there are one possible reasons at this time: the amount of alcohol in the container is too small; Two:

If the nozzle hole in the combustion chamber of the blowtorch is blocked, it should be dredged with a poke needle; Three: The switch is not turned on. When the combustion tube of the lamp body is heated by the alcohol in the heating plate, the switch of the lamp body should be carefully and slowly unscrewed, and at the same time, the vaporized alcohol in the nozzle should be ignited with a match, and then the air valve should be slowly adjusted to make the blowtorch emit a whistling sound similar to that of a jet aircraft engine.

The continuous use time of the lamp is generally not more than 40 minutes.

Second, the seat blowtorch: the lamp body and the combustion chamber into one, the working principle and adjustment method and the hanging blowtorch is much the same, compared with the hanging blowtorch structure is simple, no height requirements, to achieve normal work time is short, the volume is small, the working pressure depends on the heated lamp body directly generated, is its advantage. Prone to scalding and not having a long continuous working time (generally no more than 30 minutes), as well as not being as safe as hanging blowtorches, are its disadvantages.

When the lamp is operating, the amount of alcohol added to the container must not exceed two-thirds of its volume. After the work is completed, the blowtorch switch should be slowly unscrewed to vent the pressure of the alcohol vapor in the container, so as to prevent the red-hot copper combustion tube from reacting with the alcohol to produce a considerable amount of aldehyde poisonous gas, which is harmful to health.

Wear gloves and move Ah!

Not afraid of getting hot? Move directly.

The alcohol blowtorch is very hot! will not be blown out.

Generally speaking, it is carried by hand and moved.

After the alcohol in the preheating plate is ignited, the flame heats the cotton core tube, and the cotton core tube heats the cotton core inside, and the cotton core absorbs alcohol due to capillary action, and the alcohol becomes alcohol vapor after heating, and the alcohol vapor is ignited by spraying out of the nozzle.

After the alcohol in the preheating plate is burned out, the flame at the nozzle mouth will heat the nozzle, and the nozzle will transfer heat through the brazing joint, heat the cotton core tube, and then heat the alcohol absorbed by the cotton wick in the cotton core tube, the alcohol will be heated into alcohol vapor, and the alcohol vapor will be sprayed out of the nozzle for combustion, and so on.

As it is heated and vaporized all the time, it can be burned all the time.