Why is there a bag at the discharge port of the universal pulverizer?

Why doesn't the discharge port of the mobile branch shredder hook up the bag?

Mobile branch shredder is a machine that can crush waste branches into chips, landscaping, orchards, etc. use machines to crush waste branches, and there are many families who use this machine to crush green garbage, There are many people who ask why this machine does not hang up bags? There are two main reasons for this.

A mobile branch shredder crushes the branches.

Mobile Branch Crusher - Gardener Star.

Although the fuselage is small, the ability to crush branches is not small, and it can crush branches within 1-10 cm in diameter, and the speed of crushing is extremely fast. Although there are many conditional family use, but more used in landscaping projects, the machine belongs to the category of construction machinery. A branch is crushed into shreds in just a few seconds, and it is even more troublesome to use a bag to pick up the crushed material.

Mobile branch crusher - garden friend star is mostly used in landscaping projects, the amount of crushed branches is relatively large, as long as the branches are continuously fed into the machine, it can crush about a ton of fresh branches and leaves per hour. If the bag is hung on the machine's discharge port to pick up the scraps, it will fill a bag in a few minutes, and changing the bag will waste a lot of time. It is more convenient to directly align the discharge port of the machine with the compartment of the collection vehicle.

Or spray the debris directly onto the ground and collect it after crushing the branches, which is more time-saving. Generally, the discharge port of the "toy branch grinder" often sees a receiving bag hanging, because the machine processes the branches very slowly, and the design that seems to be very reasonable does not have much effect.

It is convenient to receive materials, and the other thing is to prevent dust.

The function is very simple, dust removal...

However, the cloth bag is generally a finer product, which can generally be used.

1.WF series dust removal and pulverizer has a feeding hopper, and there is a feeding adjustment on the lower and outer sides of the hopper.

According to the fragility and fineness of the material, the adjusting insert plate should be adjusted to the correct position of the blanking size and locked.

2.There is a discharge port under the machine, if the material is discharged with the air volume and the sock leakage causes a slight spraying phenomenon, the liquid of the through-mouth cloth bag should be added to the discharging and bundling, so that the material can slowly overflow through the through-mouth bag.

3.Before the first start-up, a dry run test should be carried out, and the machine should be checked before the test run.

parts to confirm whether the machine is qualified and good stove.

4.The machine has a water-cooled type, which should be used to avoid damage to the bearing.

Let the machine and equipment turn up first, and by the way, check whether there is any previous material blocked in it.

Listen to the sound of the machine running, whether it is normal, to judge the state of the machine.

With the help of the inertia of rotation, even if it encounters a material that is difficult to crush, it will be easily broken due to inertia.

Besides, when the motor starts, the current is very large, so do not add material at this time, so as not to cause burning.

Crushing should rely on impact, and some of the material may rotate in the center at the beginning of the discharge, which can not be crushed well.

Let the machine and equipment turn up first, and by the way, check whether there is any previous material blocked in it Listen to the sound of the machine running, whether it is normal, to judge the state of the machine With the help of the inertia of rotation, after turning, even if it encounters materials that are difficult to crush, due to inertia, it will be easily broken off Besides, when the motor starts, the current is very large, do not add material at this time, so as not to cause burning.

If your problem has been solved, please give it a thumbs up! 

Questions. Thank you

1.High output, high noise, low energy consumption, simple maintenance, easy installation, etc

2.The gap between the rotor and the stator is precise and appropriate, and the pulverizer has the best effect;

3.Good sealing performance. Built-in labyrinth seal, with O-ring sealing ring in the machine, which can be suitable for crushing heat-sensitive materials with low requirements;

4.Because the rotor rotates at high speed and brings in a large amount of air, it has a self-cooling function, which can be applied to heat-sensitive material crushers with low requirements;

5.The system adopts a quick-release structure, which can be quickly and easily disassembled, assembled and cleaned;

6.It can be equipped with cyclone separator and dust collector, and the dust is flying at noon during the production process, and the dust in the air flow can be effectively intercepted by dividing into trapping bags. At the same time, the fine powder intercepted by the dust capture bag can effectively reduce the loss rate of materials.

The universal crusher is composed of a machine base, a motor, a feeding hopper, a grinding chamber, a fixed chainring, a movable chainring, an annular sieve plate, a jitter load, a discharge port, etc., as shown in the figure below. The fixed toothed disc and the movable toothed disc are arranged in concentric circles of unequal diameter, which plays a crushing effect on the material. A large amount of dust will be generated during the crushing process, so the equipment is generally equipped with powder collection and dust removal devices.

Generally speaking, when the powder circle discusses crushing equipment, it usually refers to those specialized, relatively large-scale powder factory crushing equipment. In this article, we will show you a small grinding equipment called a universal grinder. In many occasions where materials need to be crushed, it is not a professional powder factory.

For example, food enterprises that produce white sugar, traditional Chinese medicine products enterprises, feed processing enterprises and so on. These pulverizer users have some common characteristics, and the crushed materials are mostly food, drugs, and chemicals with low hardness; The requirements for the output of a single machine are not high, but the volume of the equipment and the convenience of installation are high. These requirements are precisely the characteristics or strengths of the universal crusher that will be introduced in this article.

Application of universal pulverizer:

The universal crusher is mainly used in small and medium-sized enterprises and scientific research units such as industry, agriculture, industry and mining, medicine and health, coal geology, etc., and can crush various plants, medicines, soil, grain, sand and gravel (1-5mm), minerals, etc. It is suitable for crushing dry brittle materials, and is not suitable for crushing materials with low softening point and high viscosity. The universal crusher is a crushing equipment with impact force as the main force, accompanied by tearing and grinding effect.

The material of the universal crusher is fed into the crushing chamber by the feed hopper, and the rotary knife and the fixed knife are sheared and crushed at the same time by the impact of the blade and the knife holder, and the material automatically flows out from the outlet due to the action of the rotating centrifugal force.

Note: Due to the large difference in materials, the output varies greatly.

The universal pulverizer uses the high-speed relative movement of the movable toothed disc and the fixed toothed disc to make the crushed object crushed by the comprehensive action of tooth impact, friction and impact between materials. The structure diagram of the previous universal crusher can be seen more clearly:

The universal crusher is Hunan Zhengde peeling machinery after unremitting efforts to develop the mill, the crusher is a tangential feeding hammer mill, can crush all kinds of dry feed, such as corn, sorghum, straw, wheat straw, potato vine, corn stalk, peanut vine, bean stalk, etc., but also crush Chinese herbal medicine, quartz, coal, wood and other raw materials. This crusher has simple structure, easy operation, reliable use and easy maintenance; Suitable for farms, livestock farms, processing plants and personal use.