Should the top floor of a self built building in a rural area be heat proofed?

Although more and more families now choose to buy a house in the city, everyone goes to live in a house that basically does not see their neighbors. But there are still many people who want to return to the countryside and build a house of their own when they are old. After all, it is more suitable to retire in the countryside, because in the countryside there are not only familiar partners, but also the place where you grew up, which will bring a lot of fun to yourself when you are old.

Compared with in big cities, rural pension can be said to be many times better.

1.If you feel that it is very necessary, you can actually build an insulation. <>

Nowadays, more and more rural houses will choose to build 3 or 4 floors, but there are not so many people in the family, which means that there will be a lot of rooms that are free. In particular, the closer to the top floor, the fewer people live, but most people prefer to live on the second or first floor. Therefore, if some families want to have a thermal insulation, they can still choose to build one, and if there are a lot of people to do 3 or 4 floors, it is very necessary to make an insulation.

After all, staying on the 3rd and 4th floors in the summer is really the same as living in a sauna. In the countryside, there will definitely be many people who will choose to grow some vegetables, especially in the summer, they will take some of the vegetables that they can't eat enough to dry and make them into dried vegetables, and put them to eat after the Chinese New Year or beyond. Therefore, when most people dry these dishes, they will choose to go up to the top floor.

If there is no such need, in fact, it is better to do a thermal insulation, in the first floor of the countryside has always been cooler, in the third or fourth floor will generally be hotter.

2.Many ordinary households rarely do heat protection. <>

In fact, in reality, many rural families will not do a heat protection at all. Because they have the impression that the temperature will be higher in the summer? Even in a house, especially for many elderly people, because in a house, if you live on the first floor, it will actually be much cooler than in many places, and this may be the only benefit of a rural house in the warm spring and cool in summer.

So even if it's going to be hot near the top floor, they won't choose to do a heat protection. After all, people are smart, and they will definitely choose a cooler place to live, and after winter, the place near the top floor will become a fragrant bait, after all, it is very warm, and everyone will choose to live in a room close to the top floor. <>

Of course, if you feel that you want to live more comfortably when you go back to your hometown to care for the elderly, then of course you can choose to do a heat protection, but for many rural families now, there is still not much need.

If the roof is flat, it needs to be treated with heat protection, and a layer of heat insulation film can be applied to the top.

I think it should be done. Because it will be more comfortable to live in after doing it, and it won't feel so hot in summer.

Do it, build a pool on the roof, cement must meet the standard, when pouring cement, use a plate vibrating pump, so that the cement oil reaches every corner, and then immediately use cement sand to cross the surface, so that the cement sand is good and the first floor structure together, do not divide twice, then there will be a compartment, after the cement sand, immediately cut the first brick in the position of cutting the brick and the brick has added structure, to leave a little position around the first row of bricks to be afraid of brick seepage and drainage.

The external wall insulation of rural self-built houses refers to the thermal insulation treatment on the external wall surface of the building to achieve the purpose of energy conservation and emission reduction, warmth and heat insulation.

Common methods of external wall insulation are as follows:

1.Exterior wall insulation:

The insulation material is directly covered on the surface of the exterior wall of the house, and then the surface of the insulation material is waterproofed. This method is simple to construct, does not occupy indoor space, and has a remarkable thermal insulation effect.

2.Surface insulation:

Paste the insulation board on the surface of the exterior wall, and paste a layer of material (such as stone, ceramics, etc.) on the surface of the insulation board. This method is aesthetically pleasing and suitable for high-end buildings or preserved historic buildings.

3.Thermal insulation inside and outside:

Thermal insulation is applied to the interior and exterior walls of the house at the same time. Interior and exterior insulation can improve the insulation effect and also avoid the problem of changing the appearance of the house after the exterior wall is insulated. However, the construction is difficult and needs to occupy indoor space.

4.Air layer insulation:

Leave a certain layer of air on the surface of the exterior wall, and then install insulation materials in the air layer. Air layer insulation can improve the insulation effect and is also conducive to the moisture-proof exterior wall, but it is necessary to pay attention to the ventilation in the air layer.

5.Internal insulation:

That is, the insulation material is covered on the interior wall of the house. This method is simple to construct and does not occupy outdoor space, but the thermal insulation effect is not as good as that of external wall insulation.

In short, the choice of which external wall insulation method needs to consider the specific situation and personal needs of the house, and you can consult a professional architect or construction team to get the best insulation effect.

1. The insulation layer of the roof of the bungalow can be a kind of thermal insulation method of air circulation. It is to place a hollow interlayer about 30 cm on the roof, when the sun is exposed to the hot summer, because there is flowing air below, so it can be effectively insulated.

2. The insulation layer of the roof of the bungalow can also be insulated by water insulation method. This method will have higher requirements for the quality of the roof, and now there are many houses using this method of thermal insulation, the roof is usually some shallow puddles, about 15 cm deep, this method of roof insulation can be very effective and reasonable to reduce the indoor temperature, and the method will be relatively simple.

3. The insulation layer of the roof of the bungalow can also use the reflection method of white light paper. As the name suggests, a layer of white light paper with a very smooth surface is laid on the roof, and this material is actually tin foil.

It will not be easily stained with oil, and it can also achieve a strong reflective heat insulation effect.

4. Now there are many insulation methods for the roof of the bungalow, you can lay a layer of 10 cm thick pearl sand insulation layer on the roof, and then make a layer of cement prefabricated heat insulation board; And if it's reinforced concrete.

The cast-in-place roof can also be stored on a 20 cm thick soil layer for greening and planting flowers and plants, which not only beautifies the environment but also has the effect of thermal insulation.

.Overhead roof insulation:

During the day, the roof is burned and the heat does not immediately pass through the roof panels, but accumulates in the thick insulation and slope layer, and at night it continues to slowly transfer heat to the room, even until the early hours of the morning.

As early as the 80s, prefabricated panels became popular, and prefabricated panels can play a role in moisture protection and heat insulation. However, prefabricated panels have a fatal weakness, that is, they have a short life and are difficult to maintain in the later stage, so now people have long been useless, and it can be said that they have been eliminated. Later, in the 90s, glazed tiles and then resin tiles appeared.

Here we don't talk about color steel tiles, etc., because they are not for housing. Now the most common setting layout is still the choice of glazed tiles, which are durable and have good thermal insulation effects.

With ventilation and exhaust outlets, many residents now choose to add dormer windows even if they use sloping roofs. In this case, you can adjust the size of the tuyere independently.

The best way to use a sloping roof.

That is, to ensure heat preservation, it is also equivalent to waterproof and water conduction, and the effect is very good.

Secondly, the construction of extruded insulation board is carried out on the flat roof, and the construction of the waterproof layer is carried out on its surface layer.

In many rural areas or some counties, there are many people who choose to build their own houses, and their self-built houses like this are also more convenient for them to design by themselves. For example, if many families choose to build their own house, they will actually choose a flat-roofed house in order to save some expenses, but like this flat-roof, many people will feel that the top floor will feel particularly hot in the summer.

The top floor will feel very hot, especially some of the single-door villas built by themselves, and some houses like this will feel especially hot on the top floor in the summer. Those on the top floor may also feel as if they are in a steamer in the summer。In view of the very hot weather in summer, they may also feel that living on the top floor is very unbearable, so they also want to find some ways to reduce the temperature on the top floor.

The summer is very hot, first of all, in daily life, you can add a moisturizing insulation layer to your flat roof house, and such an insulation layer is also sold in many places on the market. And it is also possible to operate accordingly, and it is very simple to make a material like this in daily life. And from the point of view of the effect, it is also better, and like ceramsite or some insulation boards, etc., these **They may be in a different state from the ** point of view.

The style of the pool puts some water in it, but it is not the same from the perspective of its operation, for example, if it is made of a material like ceramsite, its ** may be a little more expensive. In addition, a design like a thermal insulation board is relatively common in the entire market, and its ** may also look very suitable. However, in the process of operation, many people may find it more troublesome, and they are not good at installation.

Another very simple way is to seal all four sides of your roof and design it so that you can make a cool design in the summer.

I think if the self-built house at home is flat-roofed, so the top floor will be very hot, we can install some heat dissipation devices on the top floor, and you can put an air conditioner or electric fan.

At present, the last way to insulate the rural self-built flat-roofed house is to add a steel frame to the roof and cover the color plate tile.

The steel frame adopts the slope situation, increases the appearance, prevents the water in the house, and also increases the space of the house.

That's for sure. The heating area of the flat roof is uniform. It's going to be hot. The way to do this is to install an air conditioner in the house. Otherwise, how can you win against the sun?

How should the roof insulation be laid for self-built houses? Self-built house three floors, the roof is currently not done any thermal insulation facilities, my home in the south, everyone knows, the south is hot in summer, the first floor is still relatively cool, to the second floor, as if there is a stove around the roast, once to the third floor, then if you enter the sauna, the whole body is soaked. Is there any good way to insulate the roof of a self-built house?

This problem does plague many rural friends, especially the old houses before, are made of flat roofs, in the hot summer, the top floor can not live at all, the following small house will introduce you to some common roof insulation methods in rural areas.

The roofing method is used to achieve thermal insulation. This is often used in many homes to water the roof and for showers. This can be used for thermal insulation.

The water storage insulation roof has the dual function of being separable and insulating, which can reduce the aging cracking of the waterproof layer and prolong its service life. Self-built houses can be said to be becoming more and more popular in rural areas over the years, because after working hard outside for many years, they have also accumulated some money in their hands, so they will be in the homestead of their hometown.

Build a beautiful self-built house, for your own face, for your family, for your family's better life.

The heat of the flower board is not too high. In this way, the temperature on the top floor can be controlled within a certain range, and it will not appear so hot. Moreover, this kind of thermal insulation layer is usually made of concrete insulation board, bricks, tiles and other materials, which will not cause damage and deformation due to rainy weather.

Even after the sun sets, this part of the heat is still continuously transported indoors. Another part of the reason for the heat on the top floor is that the hot air rises, and all the heat in the whole house collects to the top floor. Knowing these reasons, we can better take a approach.

The roof of the building is not designed to be insulated, and the top floor is not inhabitable in the hot summer, and the temperature is too high. And the three ways to insulate the roof of a self-built house, have you ever learned about it? Today, I will introduce you to the three ways to insulate the roof of a self-built house, in fact, the insulation layer is good to save money.