How to disassemble the liquid raw meal belt, can the liquid raw meal belt be disassembled

Dismantle the liquid raw meal belt.

The only way is to heat the heat and burn it for a few minutes. Above 250 degrees, the polymer plastic will soften and the strength will be reduced, so it can be disassembled while it is hot.

After the liquid raw meal belt is cured, it is a polymer plastic, which has high strength and strong corrosion resistance, so there is generally no solvent to dissolve, which is an advantage and a disadvantage. It does not age for more than 50 years.

Liquid raw meal belt dismantling method:

After the liquid raw meal belt is cured, it is a polymer plastic, which has high strength and strong corrosion resistance, so there is generally no solvent to dissolve, the only way is to use high temperature, burn it for a few minutes, more than 250 degrees, the polymer plastic will soften, the strength will be reduced, and it can be disassembled while it is hot. This is both an advantage and a disadvantage. It does not age for more than 50 years.

After the liquid raw meal belt is cured, it is a polymer plastic, which has high strength and strong corrosion resistance, so there is generally no solvent to dissolve, the only way is to use high temperature, burn it for a few minutes, more than 250 degrees, the polymer plastic will soften, the strength will be reduced, and it can be disassembled while it is hot. This is both an advantage and a disadvantage. It does not age for more than 50 years.

Roast it with a heat gun, the temperature of the heat gun can reach 600 degrees.

The liquid raw meal belt can be removed. Burn the liquid raw meal with fire for a few minutes, more than 250 degrees, the polymer plastic will soften, the strength will be reduced, and it can be disassembled while it is hot. Liquid raw material belt is a solid polymer with excellent sealing and locking properties.

It has been widely used in aviation, military industry, general machinery shed, transportation machinery, oilfield pipelines, industrial pipelines and civil leather pipelines, mold manufacturing, etc. Due to the use of liquid raw material belts, there is a leak-free development, and the aging resistance is usually better than that of steel. <

The liquid raw meal belt can be removed. Burn the liquid raw meal belt with fire for a few minutes, more than 250 degrees, the polymer plastic will soften, the strength will be reduced, and it can be disassembled while it is hot. Liquid raw material belt is a solid polymer with excellent sealing and locking properties.

It has been widely used in aviation, military industry, general machinery, transportation machinery, oilfield pipelines, industrial pipelines and civil pipelines, mold manufacturing, etc. Due to the use of liquid raw material belts, there is a leak-free development, and the aging resistance is usually better than that of steel.

Abstract:Ordinary PTFE raw meal belt can be disassembled and re-wound if it is not wrapped slowly, but the liquid raw meal belt will form polymer plastic after curing, and it is difficult to disassemble and remove, but it is not impossible to disassemble, generally heat it with a spray gun for a few minutes to soften the polymer plastic, and then remove it with a pipe wrench or wrench while the fiber is hot, and the low disassembly strength can also be directly removed with a pipe wrench. When disassembling and removing the liquid raw meal belt, pay attention to disassemble it in the correct way to avoid excessive force, and if necessary, you can choose a low-strength liquid raw material belt.

Let's take a look at how to remove the liquid raw meal belt. 1. Can the liquid raw meal belt be disassembled?

Liquid raw material belt is a commonly used raw material belt, which is widely used because of its ease of use and high efficiency, but it also has a disadvantage, that is, it is inconvenient to disassemble.

Generally speaking, it is relatively easy to disassemble the ordinary PTFE raw meal belt, but the liquid raw meal belt is a polymer material formed by solidification, and its disassembly difficulty is much greater than that of the ordinary raw meal belt, especially on some large pipelines, direct disassembly may not be able to remove it at all, so how to disassemble the liquid raw meal belt?

2. How to remove the liquid raw meal belt.

When using the liquid raw meal belt, if you don't pour too much, or you need to remove the original liquid raw meal belt, you should pay attention to the correct removal method, otherwise it is difficult to clean up, so how to remove the liquid raw meal belt?

After the liquid raw meal belt is cured, it is a polymer plastic, which has high strength and strong corrosion resistance, and generally has no solvent that can be dissolved, which is an advantage and a disadvantage, in most cases, it is dissolved at high temperature, that is, heated with a spray gun for a few minutes to soften the polymer plastic, and then removed with a pipe wrench or wrench while it is hotIf the disassembly strength is not large, such as the imitation of the pipeline below DN50, it is also possible to disassemble and remove it directly with a pipe wrench or wrench.

After the liquid raw meal belt is removed, there may still be some residual glue residue on the joint, and the residual glue can be removed with a wire brush.

3. Precautions for disassembling and removing the liquid raw meal belt.

1. When disassembling, pay attention to disassembling in accordance with the correct method to avoid damaging the pipe fittings.

2. After the liquid raw meal belt is disassembled and cleaned, the pipe fittings can be reused.

3. There are also some medium and low strength liquid raw meal belts on the market, which are less difficult to disassemble and can be considered if necessary.