What should I pay attention to when cleaning cabinets?

Avoid hot pots when in use, the kettle is in direct contact with the cupboard, and it is best to place it on a pot rack. Avoid striking countertops and door panels with sharp objects to avoid scratches. Avoid placing dyes or hair dyes directly on countertops, as chemicals can have an aggressive effect on countertops made of many materials.

Cabinet door panels, countertops use different cleaning methods depending on the material. The surface of the label, film, wash with warm water, weak detergent, binder ingredients, use alcohol or organic solvents to scrub. When cleaning the stainless steel sink, do not use hard steel wool balls, chemical agents or steel brushes to rub it, use a soft towel, soft cloth with water or neutral detergent, otherwise it will cause scratches or erosion.

Scrub more and less exposure to alkaline substances. If there is dust on the surface of stainless steel and dirt that is easy to remove, it can be washed with soap, weak detergent or warm water. Grease, oil, lubricating oil contamination on the surface of stainless steel should be wiped clean with a cloth, and then cleaned with neutral detergent or ammonia solution or with special washing.

If there is bleach and various acids attached, rinse immediately with water, then soak with ammonia solution or neutral carbon soda solution, and wash with neutral detergent or warm water. Stainless steel integral cabinet maintenance method Avoid hot pots when using, and the kettle is in direct contact with the cabinet, and it is best to place it on the pot rack. Avoid striking countertops and door panels with sharp objects to avoid scratches.

Avoid placing dyes or hair dyes directly on countertops, as chemicals can have an aggressive effect on countertops made of many materials. Cabinet door panels, countertops use different cleaning methods depending on the material. In order to prevent the opening and closing of the base cabinet and wall cabinet made of hard materials from making noise, the cabinet is equipped with a cooling strip in these areas, so that you can enjoy a quiet cooking time.

The stainless steel integral cabinet cabinet can be divided and combined, and all parts can be installed and combined freely, with complete functions. As many citizens love open kitchens, stainless steel cabinets have become an important place to show the owner's personality and cultural taste. Through the design of the kitchen, it can be seen whether the owner prefers Eastern culture or Western culture, whether he loves to cook or "restaurant family".

Custom cabinet hardware is often overlooked in home life, but did you know that it is also a very important part of the cabinet? It is important to know that high-quality hardware accessories also have an important impact on the service life and aesthetics of the cabinet. Even if you buy high-quality custom cabinet hardware, you can't relax the care of them.

Hinge maintenance hinge is one of the necessary hardware for the cabinet body and door panel to be opened and closed repeatedly. Since the opening frequency of the door panel is the highest during use, the quality of the hinges is particularly important. Keep the inside of the cabinet dry and avoid hinges and other hardware in humid air; Every 2-3 months, you can add some lubricating oil regularly and wipe it gently with a dry soft cloth; If you find black spots on the surface that are difficult to remove, you can wipe them with a little kerosene and do not clean them with detergents or acidic liquids containing chemicals.

Due to the strong smell of kitchen fumes, the cabinets are easy to get grease stains. What are the cleaning methods for cabinets? PChouse will take you to find out.

Cabinets made of different materials have different cleaning methods

1. Cleaning method of wooden cabinets.

The way to clean wooden cabinets is to clean them with a mixture of white vinegar and alcohol, and add a few drops of dish soap. Use a microfiber cloth dampened with this cleaning mixture to wipe down the cabinets. Next, rinse the cabinets thoroughly with warm water and finish with a furniture oil containing beeswax to paint the surface.

This way your cabinets will look brand new.

2. Cleaning method of bright painted cabinets.

Brightly painted cabinets need to be cleaned with a mild detergent, but if too much detergent is used on the painted surface, the detergent can cause some damage to the paint. So, mix the white vinegar with a few drops of dish soap, but don't go for the alcohol this time. Place this mixture in a spray bottle for better control of the spray volume.

After spraying, wipe the cabinets with a slightly damp fiber cloth. Finally, wipe dry with another clean microfiber cloth.

3. Laminate cabinet cleaning method.

Laminate cabinets are easiest to keep clean, as their surface is free of porous wood grain to absorb dirt and oil. Once a week, use a damp microfiber cloth for cleaning, again with a mixture of detergent and vinegar, a natural acid that washes foods that are difficult to clean. Dish soap helps to create a gentle lather and is also easy to clean.

Cabinet maintenance method 1:

Cabinet maintenance, try to avoid high temperature contact. Usually do not put water or the pot in which the rice is cooked. Don't put it on the countertop when it's just under the stove! Masking may distort or change the color of the countertop.

Cabinet maintenance method two.

Cabinet maintenance, cabinet cleaning methods. The surface of the cabinet is very smooth, do not use a very hard thing to scrape the countertop, just clean it with a rag and detergent, of course, the cabinet should not be watery for a long time. It is best to clean and dry after use.

Cabinet maintenance method three:

Cabinet maintenance, cabinet installation. Another important point of cabinet maintenance is that the installation of cabinets should be consistent in height and width, and the width of all middle seams should be consistent. Cabinets if installed asymmetrically. If the cabinet is not evenly stressed, then the cabinet door will be squeezed and deformed.

Cabinet maintenance method four:

Cabinet maintenance, carrying heavy loads. Cabinet maintenance, if it is marble to make achievements, it is good to be able to carry heavy objects, but considering safety issues and cabinet maintenance problems, try not to put heavy objects on the cabinet counter. Not to mention some cabinets made of wood and man-made materials, which are more unsafe and more damaging to the cabinets.

Cabinet maintenance method five:

Cabinets should also pay attention to the maintenance of the baseboard, and when washing the kitchen floor, remove the baseboard first; After rinsing the ground, wait for the ground water to dry slightly, and then put it back into the footboard; As a general rule, soaking in water should be avoided as much as possible. The footboard should be reinstalled straight and the connector should be clamped.

Have a tube of grease at home for rust removal and lubrication of hinges and hinges.

Macalon and other well-known hinge brands use tiger head hotolube or Kruber hinge grease, colorless and transparent, good adhesion and good durability. There is a 130-gram tube package in the leopard, which is also suitable for sliding door slides, etc. Apply grease directly to the hinge and it will slowly penetrate into the hinge.

The maintenance interval is four to six months.

It is not advisable to use lubricating oil or ordinary butter, which is easy to lose or freeze at low temperatures, and will volatilize harmful odors. Vegetable oils can quickly rancid, produce odors and lose their lubricating effect.

Solid wood is particularly deformed due to its moisture content, so it needs special care, especially in this hot and humid summer. Even qualified solid wood cabinet products can sometimes be deformed and cracked. So how to take care of it?

1. Frequently use a soft cloth to dust along the texture of the wood, before dusting, you should dip some spray on the soft cloth (Bilizhu, etc.) and do not wipe it with a dry cloth to avoid wiping flowers. 2. Avoid letting sunlight irradiate the surface of the furniture for a long time, which will easily cause the internal moisture of the wood to lose its balance and cause cracks. 3. In the drier environment of summer, it is necessary to regularly use artificial humidification measures to replenish the excessive loss of water, such as wiping furniture with a soft cloth after wetting water.

4. Wax regularly, every 3 months, apply a layer of wax to the furniture. Before using polishing wax for furniture, check whether the surface of the paint layer is intact. For newer solid wood furniture, the surface dust should be wiped off with a muslin cloth, and the stains that have been left for too long or are difficult to remove can be wiped with a cotton cloth dipped in a small amount of gasoline or alcohol.

Then use a small piece of cotton cloth dipped in an appropriate amount of varnishing wax to coat a large area, and then use a larger dry cloth to wipe the wax evenly in a circumferential shape to leave no traces as the standard. If KD wax is used too much, it will not only leave streaks and markings, affect the luster, but also soften the paint layer over time, which is not easy to remove. Moreover, before waxing, the old wax should be wiped off with mild non-alkaline soapy water, and the waxing should not be too dense, otherwise it will clog the pores of the wood.

5. Maintain good humidity, the ideal humidity is about 40%, if you use air conditioning for a long time, you can put basin water next to it. The temperature difference should not be too large, so as to avoid the air conditioner being turned on and off, resulting in drastic temperature changes. 6. Avoid placing overheated items directly on the surface of the furniture, which will damage the protective paint and wax on the surface of the furniture.

7. Use a soft cotton cloth or soft brush to wipe it, and avoid using metal brushes, hard brushes or rough cloths to avoid scratching the surface of the furniture.

Cabinets are a microcosm of the kitchen, the cleanliness and tidiness of the cabinets reflect the overall appearance of the kitchen, do you know how to clean and maintain the cabinets? Next, let pchouse talk to you about the cleaning and maintenance of cabinets.

1. Pay attention to whether the position of the shelving clamp (or shelf pin) is correct for the cabinet shelf. Try to choose to put heavy objects in the lower cabinet, which is suitable for placing light items such as seasoning jars and glasses, and wipe the cleaned utensils before putting them in.

2. No matter what kind of material cabinet is used, after each use of cooking, the surface of the range hood, gas stove, wall tiles and countertops should be wiped clean in time, and the used utensils and condiments should be cleaned and put back to their original places.

3. When cleaning and wiping the countertop of the cabinet, avoid leaving water on the countertop for a long time, no matter what material, long-term water staining will reduce its service life. To remove oil smoke stains, remove them with a damp cloth in time, while aged dirt needs special treatment with detergent.

4. Clean the countertop. Different cabinets will be different in terms of material, but no matter what kind of material the countertop is afraid of high temperature corrosion, in daily life should avoid hot pots, hot water kettles directly on the countertop, so as not to cause scratches.

5. In the maintenance of cabinets, it is also necessary to avoid the water on the countertop flowing down and soaking into the door panel, otherwise the door panel will be deformed after a long time. Moreover, the door hinges and even the handles will loosen, reducing the service life of the cabinet.

The kitchen is the least contacted, but the most important and inseparable place in students' lives. On weekdays, my parents work hard in the kitchen to cook the best meals for my classmates. When it's a holiday or your parents' birthday, you'll be pleasantly surprised if you can clean your kitchen.

1) In order to avoid oil stains accumulating in the gaps of the range hood, you can cover the plastic wrap on the switch key and replace it from time to time. In this way, you only need to remove the plastic wrap when cleaning.

2) To clean the turbine range hood, you can start the machine first, spray the detergent on the fan blade and the inner wall, use the centrifugal force when the machine rotates, shake off the softened oil, and then wipe the inner wall.

3) When wiping the gas stove, apply a milder detergent, and use a fine wire brush to remove the carbide at the stove nozzle, and then use the fine wire to pierce the fire holes one by one, and use a brush to remove the dirt.

4) After the exhaust fan is dirty by oil smoke, it can be wiped with a cloth dipped in vinegar.

5) The oil stains on the gas stove can be coated with kerosene on the dirty place, and it will be clean after a few wipes. Traces can be sprayed with oily cleaning solution and then wiped with newspaper or a damp cloth. New oil stains can be wiped with a dry cloth while hot. There is black ash on the tile stove, which can be wiped with half a lemon.

6) Plastic baskets, baskets, and meshes used in the kitchen have accumulated dirt and oil stains, which are not easy to rinse, so you can take an old toothbrush dipped in a little vinegar and soapy water to gently scrub the mesh, and it will be as clean as new after rinsing with water.

7) The disinfection of the cutting board, if you brush it with water every day, the germs can be reduced by 1 3, and if you scald it with boiling water again, the sterilization effect is better. From time to time, place the cutting board in the sun to receive UV exposure.

8) If the edge of the metal or porcelain dishwashing basin is stained and difficult to remove with water, you can use a scouring pad with dish soap and a little detergent to wipe it.

9) Wash the front and back of the pot immediately after use, and be sure to dry it, most people only wash the surface and not the bottom of the habit is very wrong. Because the bottom layer of the pot is often stained with the soup that accidentally refluxes when pouring vegetables, if it is not cleaned, it will remain at the bottom layer, and the thickness of the bottom of the pot will gradually increase over time, and the pot will become heavier and heavier, which will definitely affect the heat of the stir-fry in the future. Therefore, it must be washed together on the front and back, and then placed on the stove to dry with fire to completely remove water vapor, and it is convenient to use it again next time.

1. The maintenance of the cabinet body must be kept dry, and the utensils put into the cabinet should be cleaned before putting them in, especially the utensils need to be wiped dry. In particular, the basin cabinet is generally moisture-proof but not waterproof, and the fully waterproof basin cabinet of Defono kitchen cabinet is not afraid of water, creating a precedent in the industry.

2. Door panel maintenance, frequent cleaning, more wiping, often keep the door panel dry, and use a fine texture cleaning cloth to wipe the bright door panel; Solid wood door panels are best cleaned with furniture wax; If the humidity in the house is too high, it is necessary to install a dehumidifier in the kitchen to keep the kitchen cabinet dry and prevent deformation.

3. Maintain the countertop, do not put high-temperature objects directly on the countertop; When chopping vegetables, you should put on a cutting board, otherwise it will leave scratches; Keep the countertop dry as much as possible to avoid long-term soaking to prevent deformation and cracking; Strictly prevent harsh chemicals from coming into contact with the countertop; Do not directly impact the countertop with heavy or sharp objects; If there are scratches on the countertop, you can polish the countertop with 800-1200 grit sandpaper until the marks disappear, and then use a non-abrasive detergent and scouring pad to restore the original shape.