The bathroom is dry and wet separated, is the shower room size 80 150 enough?

Updated on home 2024-03-07
19 answers
  1. Anonymous users2024-02-06

    The size of the shower room is 80*150 is not enough. Most of the height of normal people is 1.6 to 1.8 meters, so the size of the shower room should be about 130*150, so that the size can meet the basic use.

  2. Anonymous users2024-02-05

    It's not enough, it's too small, people won't be able to move after they go in, and it will be very inconvenient, especially for fat people.

  3. Anonymous users2024-02-04

    Generally, the width of the bathroom door is also 80cm, which is enough for ordinary people to take a shower, but it is not sufficient. The normal width of 90cm is better, and the length is meters. The bath can be removed from it, using the pants length space, the general single bed is 90cm wide, and the double bed has meters.

    Therefore, there is no problem in terms of size, unless it is a big person over two meters, or a body size of more than one meter eight is relatively fat, it will be more cramped, but it can also be moved.

  4. Anonymous users2024-02-03

    The small space area of the room is really a particularly headache, and many of them have to make changes after the design encounters this small area, and the design of the bathroom is a more important area in the design of home decorationThe bathroom is relatively large in moisture all year round, especially when taking a bath, if there is no good separation of dry and wet, then the whole room will be filled with water vapor, and in the long run, many decorations in the bathroom will be affected, but how to separate dry and wet in the bathroom area is too small?

    How to do a good job of dry and wet separation? What are the design dimensions of the shower room? How to do a good job of dry and wet separation in a small bathroom, the reasonable layout of the bathroom area is small, in order to facilitate the direct division of several areas, the location of the shower toilet sink is set, this way can also enhance the sense of space.

    Or get a glass shower room, after the space layout is designed, you can interfere, separate the glass, the shower room has very good lighting, and the cost performance is also high.

    The semi-partition method is also very suitable for small toilets, as long as it can block the splash of water in the bathroom. Half-wall plus glass partition, which is a combined dry and wet separation method, has strong waterproof ability, and the design of the half-wall can show a different style. The design of the shower curtain partition is more economical, and you can also use different patterns and colors according to the design of the room, which is very beautiful.

    The height of the general shower room is 900mm and 900mm. If the space allows, you can make it 100mm wider, for your own safety, it is not recommended that the shower room be less than 800mm 800mm. The height is generally designed to be 1800mm-2000mm.

    When designing, it can be adjusted according to the height of your family.

  5. Anonymous users2024-02-02

    If you want to know how to determine the size of the shower room, you should start with the following three points:

    1. Determine according to the door of the shower room. The width of the double-door shower room shall not be less than 1000 mm, and the width of the movable door shall be kept at 650 mm, otherwise it will be difficult to open and close. The width of the three-door shower room should not be less than 1200 mm, and the width of the movable door should also be kept at 650 mm in order to open and close normally.

    2. Determine according to the size of the bathroom space. The height of the bathroom in most families is about 2400 mm, that is, 2400 mm, so in the standard size of the shower room, the height is generally 1950 mm or 1900 mm, which is higher than the top of the head of ordinary people, so as to avoid water splashing outside the dry area during the shower, and will not be directly connected to the bathroom ceiling to form a confined space, ensuring good ventilation conditions.

    3. Direct customization. No matter what type of shower room it is, if the standard size cannot meet the space conditions of your own bathroom, you can directly customize it. Although the tailor-made shower room is relatively high, it can meet the personalized needs, which not only caters to the requirements of independent shower space, but also reserves enough space for other bathroom products.

  6. Anonymous users2024-02-01

    It is very common to install a shower room in a residential building, and after installing a shower room, it can be separated from dry and wet, which is a very good way for the bathroom, but it also needs to have enough space.

  7. Anonymous users2024-01-31

    I think this size is a bit small, especially for us northerners, who always prefer places with a lot of space.

  8. Anonymous users2024-01-30

    If it's too high, it's not breathable and it's very unsightly. Don't forget that there are many other facilities in the shower room, such as toilets and bathroom tanks, and you should leave a certain amount of space, otherwise it will affect the comfort of use. So 80 width is still okay.

  9. Anonymous users2024-01-29

    When people want to look at the area of the bathroom, if it is big enough, buy a large bathing room, because if it is small, the heat of the bath will suffocate people.

  10. Anonymous users2024-01-28

    This mainly depends on how big the bathroom is, if it is large, it must be enough, and if it is not big, it is not aggrieved to buy a shower room.

  11. Anonymous users2024-01-27

    Reasonable circulation planning is important. It still depends on the size of your house, if the house is large, it is better to be bigger.

  12. Anonymous users2024-01-26

    Yes, but it's best to make the best choice based on your actual situation, after all, everyone's situation is different.

  13. Anonymous users2024-01-25

    If you can do dry and wet separation, it is recommended that everyone can make a shower room, so that the water vapor is completely confined to a small area, which can better ensure the hygiene of the dry area. And now a lot of shower rooms do not need to waste much space, your bathroom has a 4 square left and right, you can do a shower room, rectangular, arc, diamond-shaped, square are very suitable for small bathroom apartments, the corner position is good on the line!

    The most common shower room is rectangular, generally using half of the space on the left and right of the bathroom, the dry area of the bathroom and the shower are separated, and the normal is the partition of the sliding door.

    After all, the swing door is too wasteful of space, and if the bathroom is too small, it can't be stretched. In addition, the rectangular shower room will be placed on the side of the window, and some of the water vapor can be discharged through the window.

    Even if the space is smaller, it can be turned into a square shower room, this type of shower homeowner needs a glass partition, and the cost is the cheapest, very affordable.

    If it is a shower room made of the corner position, the cost will be more expensive, and the square one is also the cheapest among them, and most of the small apartments are put in the shower room in the corner, which is more space-saving.

    The diamond-shaped shower room is also very suitable for small apartments, and can avoid the sharp corners formed by the square shower room, which is less likely to be injured, and will be more expensive than the square one.

    Most of the diamond-shaped shower rooms with three pieces of glass are swing doors, and the biggest disadvantage is that the space of the door may not be enough, and it will be a little inconvenient to enter and exit

    But the arc shower room is also the most expensive one, and shoot after all, the curved glass process will be more troublesome, and the cost of the sliding door is higher, the two are combined, it is more expensive, it depends on everyone's budget

    Looking at these shower rooms of various shapes, I feel that it is still the most suitable for myself Whether it is a rectangular or square bathroom, you can make a rectangular shower room, which is very simple and cheap. If you compare a mini bathroom, you can also make a diamond-shaped shower room in the corner

  14. Anonymous users2024-01-24

    The dampness and cold of the bathroom have always been the biggest headache. Initially, to solve this problem, we made a glass shower room to solve the problem of running water everywhere, which also made the bathroom space very tight. It was said that in the past, it was no problem to buy a bigger house with low housing prices.

    Now houses can only be bought cheaper and lower, which makes it very difficult to buy a laminated glass shower room in the bathroom. This hasn't started to design with it yet.

    This design approach will not only give it the effect of wet and dry partitioning, but it will also not make all the unrealistic textures when used. This is a semi-partition separation that is often done at present, which will make the small space without a sense of oppression, and will also make the dry and wet partitions we want to have a practical effect.

    It is to use a wall as a partition in the bathroom to separate the shower from the rest of the space, the water can be isolated to a large extent, and there is not much consumption of space, which is also a very practical and beautiful design. This design will not expand the space from the source, but most of the partitions will improve the visual impact of the space, there will be no depression, but it will also improve the practical value of the bathroom.

    If you want to make a simple style design, you can decorate the design with a versatile milky white, so that the space is that simple and fresh visual feeling, and you can also divide each functional area. I think this design will still have water marks, and make a laminated glass in the half wall as a partition, while increasing the visual sense of spaciousness, but also greatly reducing the sense of depression.

    If the space in the small apartment can meet their requirements, they are also willing to put the washing machine in this room, so that they can put the dirty clothes in after taking a shower, which is convenient to clean up directly, and can also handle the local occupation well.

    In fact, after making a semi-branched wall partition in the bathroom, Roman curtains can also be designed on it, which will also save less space heaviness, and the generous design will make people's bathroom vision wider and wider, and will also make people feel relaxed and comfortable. If there is only one toilet in the house, it is also possible to allow Miho people to take a bath and go to the toilet at the same time, which will save a lot of things, and it will not avoid the embarrassing situation of the toilet.

    In the design of the family bathroom, instead of doing these simple overall shower room designs to occupy space, it is better to make a half-wall to increase the sense of space, which will also solve the problem of water.

  15. Anonymous users2024-01-23

    I think it's better to make a unified bathroom after demolishing the leakage, which can save some space, and can make the space look bigger, and it will also make the space look more beautiful.

  16. Anonymous users2024-01-22

    The bathroom can not be separated from dry and wet, and the shower room occupies the space, what is better than the line? The small bathroom is not very suitable for the shower room, but the dry and wet separation effect of the shower room is a good imitation stove, so when choosing the shower room, we have to choose the arc-shaped shower room, which only occupies a corner of space.

  17. Anonymous users2024-01-21

    Personally, I think that if the area of the bathroom is not large enough, then there is no need to do dry and wet separation, and the effect of dry and wet separation will not be very good.

  18. Anonymous users2024-01-20

    If the bathroom is too small, you can design the dry and wet separation of the washbasin outside, put the washbasin externally and place it outside the bathroom alone, and keep the toilet and shower room or bathtub in the bathroom, so that not only can the dry and wet partition be easily realized, but also because the washbasin position only occupies a small part of the common part, the aisle will not appear crowded.

    The dark color wall tiles, with the white doors and sinks, look much higher quality and more advanced. In addition, moving the sink out of the bathroom will not disrupt our daily habits of using bathroom facilities, and even washing and squashing the toilet every morning will not conflict with each other, saving a lot of waiting time.

    After all, the bathroom is a private space, and when the sink is placed outside, you may wish to add a partition wall design to block part of the view. The wall space is limited, so buy a mirror cabinet for the mirror, which saves space for two purposes! The background wall design of the round mirror, with brightly colored tiles mixed and matched puzzles, is really eye-catching!

    Does the hostess want to put on makeup before going out? You might as well add a makeup mirror to the wall, and the space will be freed up, even if it is slow, it will not affect the male owner's use of the bathroom. The wall of the vanity area can be styled in the same way as the bathroom wall, and the mirror can be hung with eye-catching tiles.

    The decoration style of the washbasin area and the bathroom is consistent, and the two seem to be separated, but they are closely connected in decoration! Low wall + partition, this partition looks good when the sink is outside

    Hollow carving, delicate and elegant, white material and black wall meet and collide, the details show the high taste of the owner's home! The separation of dry and wet outside the wash basin greatly improves the efficiency of the toilet.

    It should be emphasized that the dry and wet separation of the wash basin must pay attention to the storage problem, and take a moment to put it neatly after the things are used, otherwise there are many bottles and cans, and it is easy to look disorderly.

  19. Anonymous users2024-01-19

    1. The dry area is designed outside the bathroom.

    Dry area design is a completely separated design scheme outside the bathroom, this practice is usually to put the bathing area and the toilet all in the bathroom, the outside is used as a washbasin, and the middle is directly separated by a door, this scheme is the most thorough and effective, the separate handwashing station area avoids the conflict between the toilet and washing, for the family with more residents, it is very practical, in addition, this design is also very suitable for small apartment types, many owners will think that their bathroom area is too small, there is no way to achieve dry and wet separation, By placing the sink outside the bathroom, you can easily achieve the effect of separating wet and dry.

    2. Open separation.

    Semi-open dry and wet separation refers to the use of glass or some brick walls to separate the sink, so as to achieve the effect of dry and wet separation, this separation method has achieved a clear division visually, although the dry and wet areas are still in the same space, but the two are completely independent, the effect of this scheme is very good.

    3. Shower room.

    Bathroom dry and wet separation shower room decoration is also a good program, shower room is a more popular way of bathroom decoration in recent years, owners can customize the size and shape of the shower room according to their own living needs and bathroom structure, the shower room can effectively prevent water vapor diffusion, is a better scheme design in the bathroom dry and wet separation.

    4. Use the shower curtain for separation.

    In order to reduce the budget, but also to achieve the effect of dry and wet separation, many families will choose to use the shower curtain for dry and wet separation, the installation of the shower curtain is simpler and faster, and at the same time can reduce the splashing of water droplets, and the style of the shower curtain, the style is diverse, the decorative effect is more prominent, so that the effect of the shower curtain blocking water vapor is not very obvious, if the economic conditions are better, it is not recommended to use this kind of amplification of dry and wet separation in the bathroom.

    5. Use different ground materials.

    The use of different floor materials for dry and wet separation is only to divide the dry and wet areas on the ground, and lay some more waterproof materials on the area where the bathroom is located, and choose materials with more comfortable feet at the washbasin, this method is usually used with the shower curtain, and the dry and wet separation is achieved visually, but the actual effect is not very good.

Related questions
23 answers2024-03-07

The bathroom is very humid, and in a long-term humid environment, it is very easy to breed bacteria, and it can also lead to damage to other items in the bathroomTherefore, it is very necessary to separate dry and wet, but for some small bathrooms, they are too small to do dry and wet separation, so how to create a different feeling for the bathroom? >>>More

16 answers2024-03-07

Bathroom leakage generally does not involve the wall, if you knock on the wall, you only need to pay attention to whether it is a load-bearing wall. However, the waterproofing of the ground should be expanded. The location of the bathroom after expansion must be waterproof!

3 answers2024-03-07

First, the selection of wooden door repair scheme.

Wooden doors are mostly used as interior doors, and their appearance has a great impact on the effect of the whole home. For the renovation of wooden doors, different solutions need to be taken for different damage situations. >>>More

6 answers2024-03-07

The first step, before the waterproof treatment of the bathroom, the first thing is to level the floor level of the bathroom, the ground is uneven, when the waterproof paint is painted, it may be uneven, or the ground is easy to crack because of unevenness, which will crack with the ground even if the waterproof paint is applied. >>>More