How to make lanterns for elementary school students, how to make handmade lanterns for elementary sc

Updated on educate 2024-07-21
8 answers
  1. Anonymous users2024-02-13

    1.First prepare a piece of paper with a size of 1:1, fold the paper in half, fold the other side in half after dismantling, fold it in half twice, draw two perfect circles on it and cut it out.

    2.Draw a point in the center of the circle after folding the traces horizontally and vertically, fold it into the center point along the folded line at the edge, and do the other circles.

    3.Use double-sided tape to glue the folded circles together, each group of five, a total of three groups, glue the edges together to form a cylinder, and connect the glued objects together again.

    4.Take a piece of rope and pass it through the middle, then take a piece of paper and cut it from two-fifths, use scissors to refer to the strip, take a piece of rope, and tie a knot at one end.

    5.Stick double-sided tape on the blank space, roll up the rope and stick it, and the other end of the rope passes through the middle of the previously glued group to tie the dead knot, and connects the edge with the glued edge with double-sided tape to complete it.

  2. Anonymous users2024-02-12

    1.Prepare colored paper, glue sticks, small scissors, colored pens.

    2.First, use scissors to cut a rectangular strip of paper from the colored paper to make a lantern, and fold the rectangular paper in half to fold it into a narrower double rectangle.

    3.Fold the rectangle up and down in a short section and then open it, and use small scissors to cut all the parts below the fold into thin strips.

    4.Open the paper, smear the glue stick on the left and right ends of the paper, glue the two ends together, glue it into a cylinder shape, and then use scissors to cut a slender strip and a wider strip of paper from the colored paper, stick the slender strip of paper on both sides above the lantern, as the handle of the lantern, cut the wider strip of paper into a thin strip of paper below, as a lantern tassel, and smear the glue stick above the lantern tassel and stick it under the lantern.

  3. Anonymous users2024-02-11

    1.Prepare materials: 1 piece of red and 1 yellow drawing paper, 1 safety scissors, 1 stapler, white latex or glue stick.

    2.Fold the red paper horizontally in half, and use safety scissors to cut the red paper at an equal distance from the folded area.

    3.Fold a small portion of the yellow paper horizontally and tear it off, roll up the remaining paper along the long side, and fix the opening with a stapler for the teacher or parent. In order to facilitate the operation of young children, the stapler in this step can also be replaced with white latex or glue sticks.

    4.Coat the two long sides of the cut red paper with white latex and roll them up around the yellow straight tube as shown in the picture below.

    5.Here's what it looks like.

    6.Paste a slender red paper strip to make the lantern handle, and the colored paper lantern Qi family cage is completed.

    Expansion: Flower lanterns, aka"illumination" "lantern". It is a cultural product of the era of traditional agriculture in China, which has both life function and artistic characteristics.

    The lantern is an important entertainment culture of the Han nationality for thousands of years, it rewards the gods and entertains people, it has the function of "Wu opera" to reward the gods, and has the value of entertaining people, and is the treasure of the folk culture of the Han nationality.

    The lantern originated from Emperor Wu of the Han Dynasty on the fifteenth day of the first lunar month in the palace to worship the most noble sun god of the gods at that time.

    After the Buddha was introduced to China from India, due to the combination of Taoism and Buddhism's devotion to the Buddha, every fifteenth night of the first lunar month, the city and countryside are brightly lit, and the common people of the scholars all hang lamps, forming a unique custom of combining Chinese and Western.

  4. Anonymous users2024-02-10

    Elementary school students make handmade lanterns as follows:

    First, the method of hand-making lanterns.

    1. Material selection: iron wire, plastic tubes (straws for drinking drinks) or bamboo strips, colored paper or rice paper can be selected.

    2. Cut: Cut the straw or bamboo strip to cut the required length of the talk, depending on the size of the lantern. If you use iron wire, you can directly fold it into your favorite shape.

    3. Tie the skeleton: use single-sided adhesive paper to tie the intercepted materials into the skeleton of the lantern.

    4. Make the lamp body: use colored paper and rice paper or sprinkle gold rice paper to cut it into the length and width of the lantern skeleton, and then you can design the pattern by yourself. Calligraphy, painting, paper cutting, you can do it.

    After pasting, you can also use narrow strips of imitation silk paper to edge up and down, which looks more elegant, much like an ancient palace lamp.

    5. If you are not very good at calligraphy and painting, you can find some of your favorite paper-cut patterns, and you can use a piece of thin paper to trace it on the copybook, and then use scissors or a knife to carve it out, use white rice paper to make the lamp body, paste the paper-cut pattern on it, and the candlelight or light is reflected from the hollow, and the effect is quite beautiful.

    The second contains a method of making lanterns with cardboard.

    1. Material selection: choose color cardboard, generally use red and yellow, and cut the appropriate size of the paper.

    2. Carving: carve your favorite pattern on the cardboard.

    3. Modeling: Fold the carved cardboard into square, hexagonal and other shapes as needed.

    4. Install the lamp: find a small lamp bead (or LED lamp) to connect the battery and switch, and you're done.

  5. Anonymous users2024-02-09

    Preparation materials: two sheets of cardboard, a thin strip of paper, double-sided tape.

    Step 1: First, cut one of the hard cardboard into equal strips, pay attention not to cut off the two ends, and then glue double-sided tape at both ends, as shown in the figure below.

    Step 2: Then tear off the double-sided tape and glue the cardboard to another piece of cardboard that has not been cut, as shown in the figure below.

    Step 3: Then roll the cardboard into a cylinder shape and glue the two ends together as shown in the figure below.

    Step 4: Then glue a prepared thin strip of paper to the top of the Ho Min Zheng lantern for easy hanging, as shown in the picture below.

    Step 5: Finally, glue the tail of the lantern, as shown in the figure below, and here, the beautiful lantern is ready.

    The above is an easy way to make lanterns for elementary school students, and I hope it can help you.

  6. Anonymous users2024-02-08

    The method of making children's lanterns is as follows:

    Materials: Yellow paper: 1 sheet of 6x15cm paper, 1 sheet of rose: 9x15cm paper, carving knife, double-sided tape, ruler, pencil.

    Operation steps: 1. After the paper is ready, paste double-sided tape on one end of the yellow paper, paste a double-sided tape on the top and bottom of the rose-red paper, lay the paper flat, draw the parallel first of the interval left and right with a ruler, and then use a utility knife or carving knife to cut it. It is not recommended to fold in half here, if you fold in half, the crease comparison will affect the overall effect of this lantern.

    Stupid. >2. Tear one of the double-sided tape strips of rose-red paper and align the yellow paper to glue it.

    3. After sticking it, turn the origami over and privately use another double-sided tape in rose-red, which is really good to align with the bottom edge of the yellow paper. An arch appears in the middle. With keys.

    4. Tear off 2 spikes at one end of the lantern, then tear off the yellow double-sided tape and stick it together, and the shape of the lantern will come out.

    5. Finally, glue a suitable handle, and this lantern is ready to go.

  7. Anonymous users2024-02-07

    The process of making small lanterns is as follows:Material preparation: 12 New Year's red envelopes.

    Operation steps: 1. First prepare 12 red envelopes.

    2. Seal the mouth of the red envelope.

    3. Fold the red envelope in half along the long midline.

    4. Fold in half along the short and middle line.

    5. Fold the red envelope into two corners facing up and two corners facing down.

    6. Fold the corner of the red envelope upwards with a stapler for two usestaplers.

    <>8, connect the six red envelopes that the old waiter ordered to order. So that the upper part of the lantern is done.

    9. Use the same method to make the lower part of the lantern.

    10. Then the upper and lower parts are brightly pinned in the form of diagrams.

    11. Now the main body of the small lantern is done.

    12. Add a red thread above the red envelope to hang on.

    13. Now the little lantern is done.

  8. Anonymous users2024-02-06

    The easiest way to make homemade lanterns is as follows:

    1. Prepare scissors, candles, a piece of red paper, red rope, and a waste food packaging box (cups and plastic sugar jars are also acceptable).

    2. Hollow out the box, today is Valentine's Day, the reporter cut two peach hearts, beautiful and romantic (you can also design your favorite pattern).

    3. Paste the red paper, write the word Fu, the edge of the carton is eye-catching, and the red rope small lantern is basically formed.

    4. Light a candle, pick up a lantern with a chopstick, and hang a pony ornament.

    Flower lanterns, aka names"Lanterns" and lanterns, according to legend, originated in the Han Dynasty, flourished in the Tang and Song dynasties, and has a history of more than 2,000 years. "During the time of Tang Xuanzong, Yuan Xiao put on the lights for three nights.

    In the Song Dynasty, the lights were put on for five nights, and Jinghua was immersed in carnival.

    For more than 2,000 years, as a unique folk art, lanterns have continued to develop and innovate, becoming a gorgeous scenery of Chinese folk art. The lantern is a traditional folk handicraft that originated in China, and in ancient times, its main role was lighting. Paper or silk is used as the outer skin of the lantern, and the skeleton is usually made of bamboo or wooden strips, and a candle or light bulb is placed in the middle to become a lighting tool.

    Influenced by Chinese culture, in the Chinese areas of Asia, in many countries, the lantern is also a very common item.

Related questions
10 answers2024-07-21

1. Homemade flashlight.

The specific method of making it is to remove one end of the lid of a waste can (such as a Lulu beverage can) and knock the other end with a round hammer. Roll up two No. 1 batteries with thick corrugated cardboard and put them into the tank with the positive electrode facing up and the negative electrode facing down. >>>More

6 answers2024-07-21

The making of handmade boats for elementary school students is as follows: >>>More

4 answers2024-07-21

Elementary school students make small crafts as follows: >>>More

20 answers2024-07-21

Interest is definitely the deciding factor.

There are many ways to cultivate children's interest, such as dynamic teaching is much more effective than simple books. >>>More

13 answers2024-07-21

Elementary school students will pray that God will not **