How to turn on the air conditioner to remove moisture when the house is damp

Turn on the air conditioner to dehumidify. Refrigeration mode or dehumidification mode can be used to dehumidify.

If you want to dehumidify the room and cool down properly, you can turn on the dehumidification mode of the air conditioner; If you want to dehumidify the room while cooling the room, it is recommended to turn on the cooling mode of the air conditioner, set the temperature of the indoor unit to the lowest value, and lower the windshield.

Extended information: the first trick: don't blindly covet the low temperature of the air conditioner, the air conditioning temperature can be set appropriately, because the air conditioner in the refrigeration, the set temperature is increased by 2, you can save 20% of electricity, experts said that for people who sit quietly or are doing light labor, the indoor acceptable temperature is generally between 27 -28, so at this time, you can set the air conditioner to sleep gear, which can also save electricity.

The second trick: choose an air conditioner with moderate cooling power. An air conditioner with insufficient refrigeration power can not only not provide sufficient cooling effect, but also shorten the service life of the air conditioner and increase the possibility of air conditioner failure due to long-term uninterrupted operation.

So is it necessarily better to choose an air conditioner with more cooling power? Not really. According to reports, if the refrigeration power of the air conditioner is too large, the thermostat of the air conditioner will be switched on and off too frequently, which will lead to increased wear and tear on the air conditioning compressor; At the same time, it will also cause an increase in the power consumption of the air conditioner.

The third trick: close the doors and windows when the air conditioner is turned on. Do not open the door frequently in air-conditioned rooms to reduce the infiltration of hot air. At the same time, for air conditioners and window air conditioners with ventilation function, they can be ventilated without opening the damper when there is no peculiar smell in the room, which can save 5%-8% of energy.

This is because the house itself has been damp, and turning on the air conditioner has caused the temperature in the house to be low, the humidity is high, and the closed doors and windows make it impossible for moisture to escape. Many air conditioners also have a dehumidification function, so you can use this dehumidification function of the air conditioner to prevent moisture. However, if you turn on the dehumidification function of the air conditioner, the room may be relatively cold, and you should see whether you want to use this function in combination with the specific situation.

Extended Information: Tips for Preventing Dampness in Houses.

1. Lime to buy some lime to prevent moisture, and then divide it into several small bags and put them in all corners of the room, the lime can absorb the moisture in the air and become mature lime, so the hydrated lime will not have the effect of moisture-proof, and it needs to be replaced in time. 2. When the outside air is humid, close the doors and windows, especially when it rains, at this time, the outside air is particularly humid, so don't open the window for ventilation, close the window, and don't let the moisture into the house. Just after the heavy rain on a sunny day, in fact, although the weather is sunny at this time, but there is still a lot of moisture, plus after the sun comes out, the evaporation is accelerated, and the air becomes damp and stuffy, therefore, it is not recommended to open the window at this time.

3. In the case of sunny and dry weather, dry more clothes and ventilate moreIn the case of good weather and relatively dry air, you can open more windows for ventilation to alleviate the damp situation at home. At the same time, if you feel that the futon is damp, then take it out to dry.

It is possible to dehumidify the air conditioner, because now the air conditioner uses the "dehumidification mode" in the remote control, and the button selects to turn on the dehumidification function (generally the graphic of water droplets is dehumidification) to extract the moisture in the room.

Its main function is to liquefy the water vapor in the indoor air into condensate and discharge it outside, so as to achieve the purpose of reducing the indoor relative humidity. When the refrigerant in the evaporator of the air conditioner evaporates, it absorbs a large amount of heat and lowers the temperature on the surface of the evaporator, so that the water vapor in the indoor air is liquefied into water when cold, and the condensate will flow to the water tray and be discharged outdoors through the outlet pipe. This is how air conditioners work to dehumidify.

In addition to cooling and heating, air conditioners also have self-cleaning and dehumidification functions. When our room is very humid, if you want to use air conditioning to solve the problem, you need to use the help of these two modes. 1. Dedicated dehumidification mode For the current air conditioner, each air conditioner will have a dehumidification function.

When the air in our room becomes humid, we can turn on the corresponding dehumidification mode, and then let the air conditioner pump out the humid air in the house to bring us dry and refreshing air. In the process of using the dehumidification mode, you can combine the temperature and humidity meter at home to observe the changes in air humidity at home in time. If the air is too dry, it's not a good thing for us.

Therefore, using the air conditioner dehumidification mode, the dehumidification time should not be too long, otherwise it may dry the air and make the ** uncomfortable. 2. In addition to the dehumidification mode, the refrigeration and heating functions of the air conditioner can help remove the moisture in the air. For heating, the principle is actually very simple, that is, to use heat to heat and evaporate the water vapor in the air.

But in fact, what really makes the air conditioner work is our refrigeration mode. When an air conditioner is cooling, the refrigerant will evaporate, and during the evaporation process, a large amount of heat needs to be absorbed. At this time, the water vapor in the air, when absorbed and cold, will liquefy into water droplets, which will be discharged into the outside along the drain pipe.

Therefore, when the air is humid at home, we can choose different modes to dehumidify according to different seasons.

The house is very damp, and the air conditioner can remove the moisture, the specific method is as follows:

1. If the air conditioner has a dehumidification function, set it to dehumidification mode and set the temperature slightly lower.

2. If the air conditioner does not have a dehumidification mode, set it to the refrigeration mode, set the air supply speed to the lowest, and set the room temperature slightly lower, the same can achieve the purpose of rapid dehumidification.

Both of these methods can achieve the problem of removing moisture from the house.