The wallpaper is unstable and there are gaps, how do you need to remedy it?

What should I do if there are gaps in the wallpaper? How to solve the gap after the wallpaper is paved? Wallpaper is a common decoration material for our home decoration, the quality of the wallpaper paste directly affects the visual effect, many owners and friends have feedback that there are gaps in the wallpaper, so how to solve such a situation?

Let's introduce to you what to do if there are gaps in the wallpaper? How to solve the gap after the wallpaper is paved?

1. Overlapping edges and seams:

The wallpaper master is not meticulous when assembling the joints, resulting in overlapping edges at the joints, resulting in visible joints (construction is not standardized);

2. Warping and seams:

The edge of the wallpaper is not painted in place when the construction master is gluing, resulting in no glue on the edge, which naturally cannot stick the wallpaper, resulting in warping and seams in the wallpaper;

3. Glue overflow and seams:

The glue that spills out of the seams will form irregular black seams if you wipe too hard. In addition, the plain wallpaper is overflowing, and it is easy to have residual glue marks after wiping, resulting in visible seams;

4. Improper construction:

During construction, because the construction master did not collage in place during the joint, it caused an unsightly situation;

5. Excessive scraping:

Special material wallpaper, the construction master scrapes or crimps the seam when dealing with the joints, and the process or texture state of the wallpaper surface will be destroyed by excessive force.

6. Dark wallpaper:

The surface of the dark wallpaper is dark, the bottom paper is white, and it is easy to have white gaps after drying, but the obvious degree is related to the level of the sticker of the wallpaper master;

7. Wallpaper color difference:

Generally, there is a slight color difference in the plain wallpaper itself, and if there is no serial number on the front and back, it will lead to obvious joints (the wallpaper itself);

8. Wallpaper shrinkage:

Wallpaper with a high expansion rate such as pure paper must pay attention to the construction method during construction, and the construction is carried out without wiping water on the back of the paper, and the pure paper wallpaper is prone to obvious joints due to expansion and contraction;

9. Improper handling at the grassroots level:

The base wall is not firm, and the tension of glue and wallpaper will bring up the base layer, resulting in uneven walls; The wall must be firm, dry and flat in order to carry out wallpaper construction (the base layer is not up to standard).

The above is about what to do if there are gaps in the wallpaper? How to solve the gap after the wallpaper is paved? After reading the article, you must have the answer to the problem of gaps in the wallpaper paving.

First of all, we should pay attention to the condition under the gap, and secondly, you can also use some cement or putty to make up for the remedy, so as to achieve a better condition.

If the air raid is relatively large, you can find a piece of wallpaper of the same color and paste it in the gap, and use the method of splicing to solve the problem; If the gap is not large, you can hang a painting to decorate it.

Generally, the butt seam method is used, which can make the wallpaper particularly firmly glued together, and it will not overlap, nor will it produce gaps, which is very smooth.

What you need to do is to tear up some very small edges and corners, and finally use a relatively flat hard board to paste the wallpaper, and constantly squeeze out the air inside.

1. If the crack has little impact on the house, then it can be repaired after a long time after the first repair. Correction is generally filled with cement mortar, polymer mortar caulking or elastic putty and gypsum.

2. For the repair of concrete cracks that have an impact on the integrity of the structure or have a request for anti-seepage, use pressure equipment to press the cemented material into the cracks of the concrete, and the cemented material will form a whole with the concrete after hardening, and then play the intention of sealing and reinforcing.

3. Appearance repair method: modify the cement slurry on the surface of the crack or paint and other anti-corrosion materials on the surface of the concrete to avoid the concrete from cracking under the influence of various effects, so the surface can be pasted with glass fiber cloth and other methods; Or paste non-woven fabric, PVC mesh cloth or mortar to plug the cracks, and then paint and repair them.

During the construction process, the glue overflow and then the joint is wiped out, which is also caused by the wrong construction operation. In this case, as shown in the figure, there is a color difference of 3-5cm on the left and right sides of the general seam, and the color becomes darker when it is completely dry, and then it becomes white and shiny, and it will turn yellow after a period of time, because the wallpaper glue belongs to vegetable starch, and it will be oxidized after a long time.

Thin coating through thick glue can effectively avoid glue overflow. If you accidentally overflow the glue, the glue wallpaper and pure paper can be wiped clean with a sponge to spill the glue, if it is a non-woven or wall cloth, it should be disposed of within the minimum range, do not wipe a large area, it is particularly difficult to dispose of, the owner is likely not to accept, resulting in unnecessary losses.

Scraping is caused by improper use of scraper and pressure wheel during seaming. If the scraper scrapes too hard or the pressure wheel is too forceful, it will cause slight wear on the surface of the wallpaper, and the surface will shine, causing visible joints.

Reason 1: The wallpaper is not fully expanded before construction, and the wallpaper will continue to expand after the wall, and the joints are very easy to arch.

Preventive measures: the time for stuffing must be sufficient, and the construction cannot be rushed; Plain paper and PVC paper and other wallpapers that need to be glued on the paper and stuffy, do not glue on the wall.

Reason 2: The glue is too thick, the drying time is too long, it cannot produce stickiness in time, and it cannot overcome the tension of the wallpaper, so it is easy to arch; In winter, the temperature is low, and the glue drying time is reduced, which can also cause arching.

Preventive measures: Thick glue is applied thinly to shorten the glue drying time.

Reason 3: When the wallpaper is paved, there is a lapping phenomenon, or the scraper is pressed hard to squeeze the edges of the two pieces of paper, resulting in arching.

Preventive measures: be careful when paving, and do not use a scraper to press the joints.

In winter, pure paper wallpaper, especially glossy wallpaper, is more prone to arching at the joints. In addition to the above countermeasures, the following techniques can also be adopted: when gluing, you can apply about six pieces at a time, fully stuff the glue to absorb water and soften, and then paste all the good glued paper on the wall, and leave the joints alone.

Continue to cut six pieces of paper for gluing, and cover the edge of the paper with a moist towel to moisturize.

At this time, the glue on the wall is close to drying, and then the seams of the paper on the wall are processed. Wipe the surface of the wallpaper joints with a clean wet towel, pay attention to the wet towel can not have too much moisture, and then use the pressure wheel to press the seams one by one, and you can stick it firmly with one press! The purpose of wiping water on the surface is to make the paper fully absorb water and soften, and the inside and outside are integrated, which is conducive to the smoothing of the seams.

If there are still very obvious seams on the front and back, and the color difference problem is also very serious, it can be judged that there is a quality defect in the wallpaper, and it is recommended to replace the wallpaper.

Due to the single color of the monochrome wallpaper, the color difference will be shown after the wall, which is determined by the characteristics of the monochrome wallpaper, as long as the construction master constructs in accordance with the construction method, and does not overflow the glue, there will generally be no very obvious seams.

When stitching, it will be very obvious if the seams are not aligned; Or when the seam is assembled, the two wallpapers overlap each other, resulting in a seam phenomenon. Monochrome wallpaper has very high requirements for joints, and it is recommended that monochrome wallpaper take the method of edge cutting during construction, which can effectively avoid obvious problems of joints.

Generally, there are three ways to build wallpaper.

1. The first is the butt seam, which is to put the edges of the wallpaper close to each other. Neither overlap nor leave gaps. The advantage of this seam method is that it is flat, smooth, and traceless, giving people the feeling of being complete and smooth.

However, this method of stitching requires that there should be no white edges on both sides of the wallpaper, and two sides should be cut very neatly. Otherwise, the seams will create gaps. When butting the seam, if you want to make the seam tighter, you can use the palm of your hand to place it flat on the seam of the two wallpapers, and push the two wallpapers closer by the pressure of the palm.

Don't grab the edge of the wallpaper, as it may tear the wallpaper or tear it out of shape.

2. The second is lap seam, lap seam refers to the wallpaper and wallpaper stacked with each other on one side of the seam method. This method of stitching is a bit easier, but the look and feel is poor. Because there will be a dent in the seam, it will affect the smooth appearance of the paste.

So, in general, there is less adoption. However, if the wallpaper is with a white edge, one must be overlapped on top of the other in order to match the flowers. When using the lap seam method, the pasting should be carried out in the direction of the main lighting of the room, so that the dents of the lap seam will not be conspicuous.

3. The third is the overlapping cutting seam, this seam method is to overlap a part of the seam of the two wallpapers, in order to complete the flower is appropriate, and then use the ruler to align the center of the raised part of the two wallpapers, and cut smoothly along the ruler with a cutter, to cut the two layers of wallpaper thoroughly. The cutter should be sharp, and do not tear or stretch the wallpaper. After cutting, tear off the excess parts of the upper and lower layers of wallpaper, and then press the joints of the two wallpapers on the wall in line and press them flat with a caulking roller.

To make the seams tighter, you can also use the palms of your hands to squeeze the wallpaper together from both sides. The advantages of overlapping cuts and seams are not visible.

If it is a freshly pasted wallpaper, it is normal to have seams, and there is glue at the seams of the two wallpapers, and the wet seams are obvious. If it is a wallpaper that has dried thoroughly after the construction is completed, there are still seams. That's the problem of construction.

As long as the seam is not very obvious, it can be ignored, most of the wallpaper as long as it is pasted carefully, the gap can not be seen, and a small part of the wallpaper is seamless, no matter how carefully pasted you can see the seam.

Let the master of the wallpaper help to use a plastic scraper to drive the surrounding wallpaper glue and roll it away with the edge to roll it away, after pasting the wallpaper, remember not to open the doors and windows for three days, let the wallpaper wall dry naturally, premature ventilation will make the wallpaper shrink faster, the wallpaper will be more obvious at the seams, and the serious seams will crack up, this paper will be easy to show seams; Second, the quality of the wallpaper or the skill of the worker. The first is the problem of choice, which is not easy to deal with. The second is the quality of the wallpaper on the change of paper, if the problem of workers' skills is just pasted and the gap is not large, it can be dealt with, if the wallpaper is dry, it can't be.

<>I think that the wallpaper itself is a horizontal grain worker technology is no problem, this kind of paper is easy to show seams; Second, the quality of the wallpaper or the skill of the worker. The first is the problem of choice, which is not easy to deal with. The second is that the quality of the wallpaper is changed to paper, and the problem of workers' skills can be dealt with when it is just pasted and the gap is not large.

If it has been pasted, the shrinkage of the wallpaper causes seams, and the color can be subsidized according to the color of the wallpaper; If the seam is small, you can use toning paint or pigment to make up it. If it is a deeply embossed PVC wallpaper, you can use a utility knife to gently cut it along the edge of the seam one centimeter after pasting it to prevent shrinkage.

If the gap between the wallpaper and the wallpaper is generally a problem with the material or construction process, it is more difficult to deal with after this paste, if it is a dark wallpaper, it can only be traced by color mixing This gap is my personal opinion is convenient to save money, you can buy a marker pen or colored pen of the corresponding color to paint the gap, if it is a mural painting, paint the same color. If it is done by the decoration company, directly ask the company to send someone to tear off the wallpaper, re-level the original wall, polish it after drying, paint the wall base film, and re-pave the wallpaper, and all the costs are the responsibility of the decoration company.

Before pasting wallpaper, you must do a good job of wall flatness, polish smooth and smooth, and touch the wall without burrs and protrusions.

You can buy some glue for wallpaper and re-attach that piece, or you can wrap a clean towel with a bank card and scrape it in a gap to expel these bubbles.

We should spray some beauty sewing agent, so that it will look particularly good, and we should choose our own color, which also matches the wallpaper.

You can use some harder boards to scrape where there are gaps, so that you can scrape the gas out of the gaps, and the wallpaper will look very close.

You can apply some glue around the perimeter of the wallpaper, so that it can be glued more firmly without any air.

In fact, we can put on some double-sided tape when pasting, so that it will have a particularly good effect.

Kiss! Hello, I'm glad to answer your <>

The method of repairing the gaps in the wallpaper after sticking is as follows: 1. The method of pasting wallpaper is to put the front; The advantages of both methods are combined with each other, while the disadvantages are removed, and then a new method is produced. Specifically, the edges of the two wallpapers are overlapped together, the colors are good, and then a knife is used to cut off a part of the bottom wallpaper, so that the remaining wallpaper colors can be matched together, and at the same time do not overlap, so that not only beautiful, but also relative to the construction method, the materials used are not very much, so it is generally best to use this seam treatment.

However, this kind of opening tung burning paste method is a big test for the skills of the workers, and the fee is higher. You can choose the sticking method according to your actual situation. 2. The splicing method is to connect the two wallpapers tightly together, leaving no gaps or overlapping.

The wallpaper pasted in this method has an upper effect, and the seams are smooth and flat without traces. But one thing is not good is to meet the kind of owner who has requirements for the suit, and the effect of this method is not very good. 3. The construction principle of this method is to carry a piece of wallpaper on another wallpaper, which is more convenient and can solve the problem of flowers.

However, due to the overlapping of the original state, this method will appear a wide and flat overlap mark on the wall, which has an impact on the appearance and is not very good-looking. Therefore, the front should be pasted, and at the same time, the pasting should face the direction of the main lighting, so as to minimize the impact of the pasting on the traces on the wall wheel. Therefore, for how to deal with the gaps in the wallpaper, experts remind that when the workers are laying the wallpaper, the owner must remind the workers to be careful in cognition, and the seams can be re-pasted when they are just pasted, and the windows should be closed and dried naturally after the wallpaper, so that the seams will be avoided and the adhesion will be stronger.

Hope mine can help you <>

Do you have any other questions?