What are the best ways to insulate the roof of a self built house? How does it work?

Some of them paved a 50 cm high cement block on the roof, the effect is still not obvious, and a few of them spent a lot of money to redo the inclined roof on the roof, the effect is a lot better, and the form is similar to the inclined house, and the glazed tiles are built two meters high, and the heat insulation has been improved. The cost is not high. Generally, there are two ways to insulate the surface of self-built houses:

One is to do thermal insulation when doing structure; The second is overhead thermal insulation, 10 20 cm is built with bricks on the flat roof, and then prefabricated panels are installed to make the form of overhead insulation, and finally plastering mortar.

<> it can be laid upstairs, which is convenient for equivalent insulation. The prefabricated house is made of steel and wood, and is suitable for the working area of office workers on various construction sites. It can also be used for flat top floors, various warehouses, etc.

In this way, the temperature on the top floor can be controlled within a certain range, and it will not appear so hot. Moreover, this kind of thermal insulation layer is usually made of concrete insulation board, bricks, tiles and other materials, which will not cause damage and deformation due to rainy weather.

Self-built houses can be said to be becoming more and more popular in rural areas over the years, because after working hard outside for many years, they have also accumulated some money in their hands, so they will build a beautiful self-built house on the homestead of their hometown, for their own face, for their own family, and for their family to live a better life. The heat on the top floor is not too high, so that the temperature on the top floor can be controlled within a certain range and does not appear so hot. Moreover, this kind of thermal insulation layer is made of special materials, which will not cause damage and deformation due to rainy weather.

This part of the heat is still continuously transported to the room. Another part of the reason for the heat on the top floor is that the hot air rises, and all the heat in the whole house collects to the top floor. Knowing these reasons, we can better take a approach.

Expanded lightweight materials such as vermiculite to reduce roof loads and facilitate management; The lower part of the retaining wall is provided with drainage holes and water nets, and the drainage slope is 1%--3%, so as to discharge the stagnant water in time; Pay attention to the anti-corrosion treatment of the rigid waterproof layer, and use waterproofing and fertilizer to erode the steel bar from the cracks.

You can buy some thermal insulation layer by yourself, ** is not particularly expensive, and then you can stick it on your roof, which can play a role in heat insulation, and it is also very easy to operate, and you can also plant some vegetables or fruits on your roof, which can also play a role in heat insulation, or make a ventilated place, and also play a good role in heat insulation.

The method is to put some thermal insulation coating on the roof, heat it with a hair dryer, and then let him stick it firmly on the roof, so that it will reduce the absorption of sunlight and can be insulated.

At this time, you can place some water storage type insulation layer on the roof, so that you can ensure the temperature to adapt, the first thing is to buy this material, and then seek professional construction team members to carry out the construction.

Air circulation and insulation methods. It is to cover the roof with a hollow interlayer of about 30 cm, which can effectively isolate the heat transfer effect when the sun is exposed in summer, because there is flowing air underneath. White paper reflection method.

As the name suggests, it is to lay a layer of white paper with a smooth surface on the roof. This material is tin foil, which is not easy to get oily, has strong reflective power, and is heat insulation.

This method places high demands on the quality of the roof. Nowadays, many houses use this type of insulation, and the roof is usually a shallow puddle, about 15 cm deep. This method of roof insulation can effectively and reasonably reduce the indoor temperature and is relatively simple.

For example, if the user on the top floor uses ceramsite concrete.

The method of heat preservation can greatly reduce the indoor temperature, not only can you have a comfortable summer, but also can effectively save electricity and reduce electricity expenses. As a roof insulation layer, ceramsite concrete has a good moisture-proof and waterproof effect while effectively insulating heat. Now ceramsite concrete has been widely used as a toilet backfill and roof insulation.

If it is cast-in-place reinforced concrete.

Roof, on which a 20 cm thick layer of soil can be stored for greening and planting flowers and plants, which not only beautifies the environment, but also has the function of thermal insulation. On the roof of a self-built house, the ceiling of the top floor.

The heat should not be too high, so that the temperature of the top layer can be controlled within a certain range and will not appear so hot. And the insulation layer is made of special materials, which will not be damaged or deformed due to rainy weather. It is also good to build a large swimming pool on the roof of the building using the means of water storage.

It can not only play the role of heat insulation, but also meet the family's enjoyment of water. However, it should be noted that since the swimming pool is built on the roof of the building, the first floor should be waterproof to avoid water seepage and damage to the top floor. You can make a "garden" or a base of fruits and vegetables on the roof according to your preference, which can absorb the heat of the sun well and reduce the indoor temperature.

And know that the soil in which the flowers and plants are planted has a protective effect on the roof, which can make the roof last longer.

In today's market, there are materials that are specifically used to decorate roof floors, such as foam tiles.

And hollow bricks, not only laid very conveniently, but also have a good guarantee effect on the roof, good thermal insulation effect, strong aesthetics. Growing your favorite fruits and vegetables on the roof not only achieves the effect of insulation, but also makes them edible when they are ripe, which is very practical. In the evening, you can invite friends and family to enjoy leisure time on the rooftop, chat and play cards, which is great.

If the family economy is relatively sound, you can build a false roof on the roof, that is, add an extra layer to the roof. But the extra layer is hot and not suitable for people, but it can be used as a storeroom. Color steel tiles used to build fake roofs.

**Expensive, need to be determined according to their actual situation.

The roof of the building you build yourself also needs to be insulated, otherwise in the summer, it will feel very stuffy and hot, and if you do heat insulation, you must do a good job of waterproofing, and then put a layer of water on it.

Of course, you need to do insulation, if you don't do insulation, then your home will be very hot in the summer. A layer of insulation should be added to the room when the roof is built.

Of course, it is necessary to do insulation, and most houses can add a thermal insulation layer, which is very important and can play a good role.

Need. I think it would be better to insulate with greenery. Because this insulation method is particularly cheap and cost-effective.

Water can be stored on the roof, which can not only insulate but also save water. You can also use red bricks to make a thermal insulation layer, that is, put red bricks on the roof, and the plane width of a red brick is about 12 cm on the side and tiling, and the ventilation vents are reserved on all sides

1. Laying the thermal insulation layer:

The common method of top layer insulation is to lay the insulation layer, which can effectively prevent the irradiation of the sun in summer, the commonly used materials for laying the insulation layer are laying the heat insulation bricks, and the top floor is brushed with heat insulation paint, pasting reflective material tin foil, the simplest insulation layer investment is relatively small is to lay a layer of soil about 15 cm thick on the roof, these methods can play a role in heat insulation.

Please click Enter a description.

2. Build an awning

In addition to laying the insulation layer close to the roof, there is also a sunshade net on the roof of the building, building an awning, the advantage of this practice is that people can be on the roof activities, such as drinking tea and chatting and enjoying the starry sky, but the investment is relatively large, the construction is unreasonable, and it will also affect the lighting.

Please click Enter a description.

3. Roof planting:

There are many planting methods for planting vegetables and fruits on the roof of the building, which can be planted directly in the soil layer, and there is a combination of shelves, which is to buy a ready-made vegetable planting box, build a simple vegetable shelf, and plant some climbing vines or vegetables, these methods can also play a role in heat insulation, and at the same time you can eat fresh vegetables, but you must do a good job of drainage.

Please click Enter a description.

4. Water storage and heat insulation

Build a swimming pool on the roof, inject water with a height of about 20 cm in the pool, which can also play a role in heat insulation, and if the load-bearing function of the roof is relatively strong, you can also build a swimming pool, but this method needs to do a good job of waterproofing the roof.

Please click Enter a description.

5. Ceiling plus thermal insulation material:

The thermal insulation on the roof is input is the outer layer of thermal insulation, and you can also consider indoors, such as making a suspended ceiling, adding thermal insulation panels or thermal insulation cotton to the ceiling, so that it can be ventilated and insulated.

Please click Enter a description.

An isolation layer can be added on top.

Or cover it with tiles.

It can be used as a heat insulation board on the roof of the building, which can effectively insulate the heat

It is difficult to solve the problem of extreme heat on the roof, and the roof insulation tricks of self-built housesYou can store water on the roof to cool down, you can plant vegetables and flowers to cool down, you can pave floor tiles to cool down, and you can use air conditioning to cool down.

If you are building a self-built house, you can use this insulation trick.

The roof of the building is extremely hot, especially in the summer, when the fan blows hot air, then you can take the method of storing water on the roof to cool down.

The specific operation is also very simple, that is, pour water on the roof every night before going to bed, so that the room will achieve the effect of cooling.

You can plant some flowers and plants on the roof, which can play a role in cooling down.

Some of my friends also grow vegetables on the rooftops.

I know an older sister who built a vegetable garden on the roof of her house, which not only eats fresh vegetables, but also helps to cool down.

Red bricks can be laid on the roof of the self-built house, and tiles can be laid to cool down, but the best cooling effect is to pave floor tiles.

You can go to the building materials market and buy some floor tiles to spread on the roof, which not only has a cooling effect, but also can dry a lot of things.

For example, in rural areas, some crops are liked to be dried on the roof of the house, and after the floor tiles are laid, these things are dried, and these things will be very clean.

4. The last trick is the fastestThe last trick is the fastest, but it costs a little bit because it requires electricity.

Install air conditioning in the room, it will be very cool, now the air conditioners are intelligent inverter type, to a certain temperature, the air conditioner will stop, more power saving.

The above are the 4 thermal insulation tips introduced, which one do you like the most?

Remind everyone,Regardless of the cooling method, it is necessary to do a good job of waterproofing the roof, otherwise the roof will leak.

The most common is to store water on the roof of a building, which is most common in rural areas, which can not only reduce heat but also raise some small fish. You can also build an awning on the roof of the building, and you can also drink tea and chat under the awning in the evening.

Set up the awning, install reflective devices, install thermal insulation layers, these are all methods of heat insulation, awning has a comprehensive external shading function, can completely block ultraviolet radiation, reduce indoor temperature, reduce air conditioning load; It has an energy-saving effect, which is of great significance from the perspective of energy saving and environmental protection; While blocking the scorching summer day, it can reflect the strong sunlight into the room in the form of diffuse light, so that the indoor light is bright and not dazzling, and does not affect the landscape outside the window seen from the inside, extending people's living space from indoor to outdoor, creating a new living space; The special anti-ultraviolet function of its sunshade cloth not only protects the human body from ultraviolet rays, but also greatly extends the service life of interior decoration and furniture.

Build a thermal insulation layer on the roof of the building, use the kind of material that can dissipate heat, wrap a layer on the outside, or paste a layer of material with better heat dissipation.

1. Plant flowers and vegetables on the roof to form a roof garden, the most common is to plant grapes, which are lush in summer and fall in winter, and can also enjoy the shade under the grape trellis in the evening.

2. Add a layer of steel structure to the original roof, and then cover the tile as a thermal insulation layer, the construction is simple, and the space can be used as storage.

The heat on the top floor of the house is an unavoidable problem, so the roof must be insulated. If you are decorating your house, let's take a look at these six self-built roof insulation tips, I hope to provide you with some help!

Tips for insulating the roof of a self-built house:

1. Laying the thermal insulation layer:

Because air circulation can take away the heat, so you can lay a layer of insulation on the roof of the house, so that when the temperature rises, you can conduct the heat away through the air between the roof and the insulation layer, which can effectively prevent the temperature of the ceiling from rising sharply, which is a very traditional but effective insulation method, but the insulation layer must use fire-resistant materials, so as not to call the fire can not be controlled.

2. Build an awning.

Some people may feel that the laying of the insulation layer will affect the usual activities on the roof, and if the paving is not good, it will also affect the beauty of the house, so some people will build an awning on the roof of their house, which is also a good method.

3. Lay thermal insulation materials and Kaichi materials.

If you want to save money, then it is not much to lay a layer of insulation material on the roof, not only can be insulated, but also waterproof, usually this is generally insulated with foam materials, such as foam cement board, foam cotton, etc., these can be used, of course, it is best to choose fireproof materials for safety. Sun Zao.

4. Greening and heat insulation.

In recent years, people have become more and more concerned about green environmental protection, so if you think 5, water storage and heat insulation.

Water is a good heat transfer fluid, so you can also choose to store water on the roof for thermal insulation, the more water is stored, the better the insulation effect, if the conditions allow, you can also build the roof into a swimming pool, but if you want to insulate the water layer, then the quality of the roof is very important, otherwise after a long time, there will be ceiling seepage and other situations.

6. Install a light-absorbing reflective device.

In addition to the summary: