What to do if it rains lightly as soon as the floor tiles are laid

If it rains lightly, it's fine, but if it rains heavily, it's best to cover it with a tarpaulin to prevent rainwater from seeping in, causing the loss of mortar below, which will affect the floor tiles.

The quality of the laying.

Attached floor tile laying construction technology:

1. Fill the sand first as the binding layer material for laying tiles, and pay attention to the sand should be selected to be relatively uniform and delicate, and there can be no large agglomeration.

2. Only the sand is leveled first, can the tiles be placed on it, and it should be noted that the small clumps of hard blocks should be removed while leveling, and the binding layer material should be uniform and stable. The thickness of the bonding layer should be about 30mm; The bonding layer and the tile should be paved at the same time in sections, and cement slurry or dry-paved cement sprinkling should be used for bonding.

3. Place the floor tiles carefully on the base layer, pay attention to the level with the tiles laid in front, and compare whether there is any color difference or size.

4. Use a rubber hammer or wooden hammer to gently knock the tile tightly and position, do not use a strong or metal hammer, if the joint layer is uneven, remove the tile and re-smooth it. Then check whether there is a plate between the tiles is not strict, the thickness of the plate is different, and the size error is large, otherwise the laying will affect the appearance.

5. Use the wooden square to check whether the tiles are laid according to the established height, and the device at the door is actually set up to locate the height of the tiles, in order to be able to match the height of the floor outside.

6. Dock the tiles on the joint layer to determine the height of the joint and the tile on the joint layer, so that you can be sure when laying.

7. When mixing cement, when using cement mortar bonding layer, the volume ratio of cement sand should be 1 5, and it should be stirred evenly after sprinkling.

8. Put cement on the back of the floor tiles, and try to remove the floating soil on the surface of the floor tiles before applying cement, so as not to affect the bonding ability of the cement.

Outdoors, it's okay if it rains a little! As long as you don't step on it! If it's just laid out and it's not raining yet, but it's raining, you can cover it up with some straw curtains or something! Try not to step on it until it solidifies!

It is best to cover the cement surface with kraft paper or plastic sheeting to prevent lumps from forming after being damp or soaked. Due to the humid weather, the cement setting speed is slowed down, so the floor tiles cannot be stepped on immediately after the paving, and a springboard must be erected to pass.

Just go to the hardware store and buy plastic film to cover it.

When decorating, the developer will think that you have damaged the waterproof layer during the decoration and should be responsible for yourself, if you do not lay the floor tiles, the developer is responsible.

If it rains just after pasting, then your tiles definitely need to be re-pasted, because the cement used to stick the tiles has been washed away by the rain.

Floor tiles are a type of floor decoration material that is fired from clay. A variety of specifications. The bulk density is small, pressure and wear-resistant, and moisture-proof.

It is glazed and plays a decorative role. It is mostly used for the ground and floor of public buildings and civil buildings. There are many varieties of floor tiles, and there is a lot of room to choose from, which can be divided into glazed tiles, vitrified tiles, etc. according to the material.

Dimensional deviation: The length, width and thickness of the brick are measured by vernier calipers or straight steel rulers.

Surface quality: The brick of no less than 1 square meter is tiled upwards and the light of each part reaches a certain standard, and then visually inspected with the eye within the specified distance.

Among the many floor decoration materials, floor tiles have become the first choice of consumers. It has the advantages of solid texture, easy to clean, acid and alkali resistance, and no water permeability.

In the actual paving, the rubber hammer should be used to vibrate, the force is even, the floor tiles are prevented, the flatness is checked with a level, and the smoothness of the brick joints is checked by passing, and the surface is required to be smooth, the color is consistent, the joint height is consistent and flat, and the bonding is dense and firm without hollowing, so as to meet the elevation and design requirements of the finished surface.

The outdoor floor tiles have just been pasted and it rains, and there should be no effect on the floor tiles, as long as the cement is not washed away by the water, because the cement can also be structured in the water.

There will definitely be an impact, the main thing is that the firmness will be reduced.

Congratulations, God has helped you maintain the freshly pasted floor tiles in your home. Attentive friends will find that the master who pasted the tiles will write some water on the freshly pasted floor tiles

The purpose is to let the water seep under the floor tiles, so that the semi-dry cement sand under the floor tiles has enough water to react with the cement to solidify, and can cool down (cement curing will generate heat) to make the floor tiles more stable.

The balcony has just been renovated and the floor tiles have just been pasted before it rains, which will have an impact, but not much.

The sticking of ceramic tiles mainly depends on whether the materials used in the paste are dry and solid, the strength time of the cement mortar is completely cured is 72 hours later, the curing process of silicone glue is developed from the surface inward, and the surface drying time and curing time of silicone with different characteristics are not the same, so if you want to repair the surface, you must carry out the glass glue before drying (acid glue, neutral transparent glue should generally be within 5-10 minutes, and neutral variegated glue should generally be within 30 minutes).

It's okay for a short time, and it's definitely not okay to soak for a long time, but it's basically okay this season. It's not like winter when it's freezing and freezing.

It's not bad! Don't worry.

The impact is not large, and there is a hollow drum phenomenon.

After seven hours, there is basically no effect, but it is still necessary to apply a waterproof membrane.

Basically, it won't make any difference rest assured.

Depending on the size of the rain, it will definitely have an impact, mainly because the firmness will be reduced.

If there is water coming in, it will be affected, and it is best to cover it with plastic sheet, so that the protection will be better.

It didn't rain much. It doesn't matter.

There is a certain impact, and it is better to find something to cover.

Rainy days are generally not suitable for tiling, especially when it rains heavily, there is a lot of rain outside, and it is easy to wash off the cement with tiles, so the tiles are not sticky, which affects the tiling effect of the tiles。If you want to apply tiles, it is best to avoid rainy days so that the tiles and cement will not be easily washed away. For ceramic tiles, rainy days often cause the tiles to absorb too much moisture, causing the tiles to crack easily or even fall off.

In addition to affecting the effect of laying tiles on rainy days, it will also affect the construction of workers。It is troublesome to tile outdoors on a rainy day. If the decoration does not take corresponding protective measures in rainy days, it will have a certain impact on the quality of decoration.

However, as long as the moisture-proof work is done well, normal construction can still be carried out. However, for several projects, it is best to avoid rainy days.

Purchase materials. The air humidity is high on rainy days. Some materials that easily absorb moisture, such as wood, boards, and drywall, are susceptible to moisture if they are not handled properly during transportation or storage.

Wood affected by humidity will have mildew. After wooden keels and wood products are made of boards, as the air gradually dries, the moisture in the material is easy to crack and deform after volatilization, which will also affect other materials.

Cloudy,Wooden floors can be paved when the air humidity is not very high, but it is very important to check the moisture content of the floor。Generally speaking, laminate and parquet flooring can meet the requirements, while solid wood flooring and bamboo flooring must be inspected. Otherwise, in winter, indoor drying and heating can cause excessive floor gaps.

After passing the inspection, be sure to put the floor in its original packaging and wrap it in plastic sheeting, otherwise the floor will absorb moisture from the indoor air and deform.

I think the impact should be there, it should not be big, because it may be difficult to do.

I think it's quite big, and it probably causes the freshly glued bricks to fall off.

The impact on the floor tiles is actually very large, because if it rains continuously, it may make him weaker.

It has an impact because it makes the air more humid. It is not easy to be firm immediately.