What s going on with the Camry starting and stopping automatically in a minute and a half

First of all, we need to know that the automatic engine start-stop technology is to automatically turn off the engine when the vehicle stops temporarily during driving (such as waiting for a red light); When it's time to move on, the system automatically restarts the engine.

The start-stop system works when the vehicle stops due to congestion or intersections. The driver presses the brake pedal and stops to disengage. At this time, the start stop system automatically detects:

The engine is idling and there is no gear; The wheel speed sensor of the anti-lock system shows zero; The electronic battery sensor shows that there is enough energy for the next start. When these three conditions are met, the engine automatically stops turning. When the signal light turns green, the driver depresses the clutch and immediately activates the "start-stop" and starts the engine quickly.

On automatic transmission models, as soon as you release the brakes or turn the steering wheel, the engine will automatically ignite immediately, and you can immediately step on the accelerator to start, and the whole process is in D gear.

The default system setting of the car is to start the engine after one and a half minutes, the purpose should be to protect the battery, to avoid damage caused by too much drop in power, especially when the air conditioning is turned on, it will start automatically in less than one and a half minutes, which should be based on the consideration of protecting the battery. However, according to the manual, the start time after stopping can be adjusted by the brush concealment function.

Needless to say, the engine start-stop will not be triggered when the brakes are lightly pressed, Toyota's automatic start-stop setting is still relatively user-friendly.

The Toyota Camry's automatic start-stop function is located in the control panel on the left side of the driver's seat, with mechanical buttons. When it needs to be turned off, just touch the button position. Nowadays, slightly more advanced models will be equipped with automatic start-stop and automatic parking functions at the same time, which takes into account both labor-saving (no need to apply brakes) and fuel economy.

Automatic start-stop is actually a short shutdown of the engine, during which the brake pedal must be pressed and cannot be released. Release the brake pedal and the engine will start immediately.

Toyota Camry Camry Camry Dual Engine Automatic Start and Stop Use Skills:

1. The automatic start-stop function can only be permanently closed by brushing, and the driver needs to manually close it in the car every time it is used.

2. When encountering serious traffic jams, it is more comfortable to turn off the function. Frequent start-up greatly reduces the ride comfort.

3. If you start on a ramp, you should also turn off this function, otherwise it may cause a slow start response and slip.

4. Automatic parking is simply to help the owner step on the brakes and will not turn off the engine during this period. Press the accelerator pedal to dismiss the signal, at which point the vehicle starts again.

Because the battery used by Gao Sui to automatically start and stop cannot be used by ordinary batteries, there will be abnormal start and stop phenomena after replacing the battery.

A battery is a type of battery, also known as a storage battery, which works by converting chemical energy into electrical energy. Usually the battery refers to the lead-acid battery, that is, a kind of electrode mainly made of lead and its oxide, and sulfuric acid solution as the electrolyte.

of batteries. A battery is a battery that can be recharged after discharging. There are lead-acid batteries, nickel-iron batteries and nickel-cadmium batteries. The positive electrode of a lead-acid battery is lead dioxide, and the negative electrode is lead, the electrolyte.

It is a dilute sulfuric acid solution. When discharging (using), the positive and negative electrodes react with sulfuric acid to form lead sulfate, and when the concentration of sulfuric acid solution drops to a certain level, it must be charged. When charging with an external power source, the electrode and solution can be restored to their original state, and they can be used again after charging.

A lead plate filled with spongy lead was used as the negative electrode, a lead plate filled with lead dioxide was used as the positive electrode, and 22 28% dilute sulfuric acid was used as the electrolyte. When charging, electrical energy is converted into chemical energy, and when discharging, chemical energy is converted into electrical energy. When the battery is discharged, the metal lead.

It is the negative electrode, and the oxidation reaction takes place.

is oxidized to lead sulphate; Lead dioxide is the positive electrode, which undergoes a reduction reaction and is reduced to lead sulfate. The battery is using direct current.

When charging, lead and lead dioxide are generated at the two poles, respectively. After the power supply is removed, it returns to its pre-discharge state and forms a chemical cell. Lead-acid battery is a battery that can be charged repeatedly and discharged by a ruler, and Qi Maobu is called a secondary battery.

Its voltage is 2V, and it is usually used in series with three lead-acid batteries in series, and the voltage is 6V. The car uses 6 lead-acid batteries connected in series to form a 12V battery pack. Ordinary lead-acid batteries should be supplemented with distilled water after a period of use.

Keep the electrolyte containing 22-28% dilute sulfuric acid.

1. First press the brake pedal of your Camry vehicle in the cockpit. Otherwise, the vehicle cannot be started.

2. Click the one-button start button in the center control of the vehicle to start the vehicle engine.

3. After that, you can find the automatic start and stop button at the illustrated position of the vehicle cockpit.

4. Click the icon button to turn off the Camry's engine automatic start and stop.

Summary. Hello Camry car permanently closed automatic start and stop, you can buy a start and stop switch or modify the start and stop switch or its wiring harness by yourself; This method eliminates the need to manually press the switch for automatic start-stop and shutdown every time you get on the bus.

Hello Camry car permanently closed automatic liquid hole base start and stop trouble, you can buy a start and stop switch or modify the start and stop switch or its wiring harness; This method eliminates the need to manually press the switch after each time you get on the car, and the step of automatic start-stop and shutdown in the middle of the vibrating line.

1. The first method is relatively simple to operate, and there is no need to make any changes and changes to the vehicle. Every time you start driving, after entering the car and starting the vehicle, because the Camry automatic start-stop function is turned on by default. So find the automatic start-stop switch near the bottom of the dashboard and turn it off.

After turning it off, there will be a prompt on the meter that the automatic start-stop function is not available. However, if the ignition is re-switched, this step needs to be repeated to ensure that the system is off. 2. The second method is more professional to operate, and the parameters of the software in the control unit need to be modified, so that the automatic start-stop or differential system is closed by default.

This method is relatively costly and risky, so you can choose it at your discretion.

3 Tips for starting and stopping to turn off permanently1Expose to the sun and start the car to show that the temperature is greater than 35; 2.Then click on the interface of the engine start-stop function to deactivate the skin, and the function is already turned off at this time; 3.

After that, click the switch with your hand, press and hold the engine start-stop function deactivation icon, and then the small yellow bar disappears (that is, the start-stop), and then releases; 4.In the next few seconds, the little yellow bar will reappear (meaning it is turned off again), and the operation is complete, even if the temperature drops, the engine start and stop will be turned off, and then the cold start will still be turned off. In this way, the start-stop loss grip is also permanently closed by default.

Summary. Hello dear. Here's how to turn off the automatic start-stop function of the eighth-generation Camry engine:

1.When the vehicle starts, turn it off by selecting "Driver Assistance" from the "Vehicle Settings" option on the dashboard, then selecting "Start-Stop System". 2.

While driving, the function can be turned off by pressing the start-stop system button. The button is usually located above the dashboard or on the control panel.

Hello dear. The method of turning off the automatic start-stop function of the eighth-generation Camry engine is as follows:1

When the vehicle starts, select "Driver Assistance" in the "Vehicle Settings" option on the dashboard, then select "Start-Stop System" and turn it off. 2.During driving, the function can be turned off by pressing the start-stop system button.

This button is usually located above the missing luggage of the gauge or on the control panel.

Hello The engine automatic start-stop function of the eighth-generation Camry is an energy-saving and environmentally friendly technology, which can automatically turn off the wild engine when the vehicle is stopped to reduce fuel consumption and emissions. However, some motorists may not like this feature as it may affect the driving experience. In addition to turning off the function, there are other things the driver can do to reduce the frequency of engine start-stops.

For example, driving in heavy traffic can be avoided as much as possible, as this can lead to frequent stops and starts. In addition, coasting by inertia can be used as much as possible to reduce the use of brakes, as braking can also cause the engine to start and stop. <>

<> in short, turning off the automatic start-stop function of the eighth-generation Camry engine is an easy way to help the driver improve the driving experience. However, there are other factors that drivers should be aware of to minimize the frequency of engine start-stops. Hope mine can help you!

Any questions, dear? 