Why do retreaded forklift tires always bulge tops?

Why do retreaded forklift tires always bulge tops? Everyone knows the importance of tires in cars, and without them, the meaning of cars would no longer exist. What if there is something wrong with the tires, what if you find it while driving?

For example, if there is a bulge problem in a tire, why is this happening? How can we prevent it, let's listen to what the teacher of the maintenance plant has to say.

The master explained that the reason and situation are nothing more than these 4.

1. The tires have passed their expiration date. Generally, the life of the tires is between 2 and 3 years, if the shelf life is exceeded, the tires will quickly age, and in the process of driving, if you hit some stones or road teeth, there will be a bulge.

2. The driving habits of the car owner. When driving, car owners like to speed up sharply but there are no obstacles, resulting in a huge impact on the car field, such as not slowing down when crossing speed bumps, or seeing stones on the road, do not know how to control the speed, bulging is naturally reasonable.

3. The tire pressure is too high. Now the car will come with the car tire pressure self-test function, only need to know the tire pressure through the dashboard, if the tire pressure is too low, it is easy to cause the tire and the ground contact area is too small, the tire will be worn prematurely, when driving, if the speed is too fast or the tire heat dissipation is not very good, it is easy to cause the tire tread temperature to be too high, the same bulging situation.

4. Tire quality problems. In order to save money, some car owners choose some medium tires, but because some tire cords are unevenly distributed and the strength is not enough, naturally during driving, when there is a fierce collision, it will bulge faster than other tires.

Do you understand the above 4 tire bulging situations? In life, we also need to observe the condition of tires from time to time, and once an abnormality is found, it is necessary to test it. Welcome to leave a message, look forward to following or collecting, remember to like it.

If the appearance of the tire does not have any abrasion or extrusion marks, the cord is not broken, and the inner wall of the tire is not obviously damaged, it can basically be determined as a quality problem.

It could be that the thread in the tire is broken.

If the forklift has a bump after changing the left rear wheel with a new tire, it may be caused by the following reasons:

1.Poor tire balance: If the newly installed tires are unbalanced, it will cause the forklift to bump while driving. At this time, it is necessary to find a tire service provider to adjust the tire balance.

2.Insufficient tire pressure: If the tire pressure is insufficient, the tire will deform, causing the forklift to jolt while driving. At this time, it is necessary to check whether the tire pressure meets the requirements on the vehicle instructions to ensure that the tire can maintain its normal shape.

3.Poor wheel forming: If the hub of a newly installed tire is damaged or deformed, it can also cause the forklift to have a bumpy hail belt. At this point, the problem can be solved by replacing the hub.

4.Suspension system failure: If the forklift's suspension system fails, it can also lead to bumps. In this case, it is necessary to find a professional technician for vehicle maintenance to inspect and deal with it.

If the above operations cannot solve the bump problem, it is recommended to contact a professional mechanic or garage to solve the problem.

The main reason is that the tire wall cord or company breakage causes the air pressure in the tire to be unstable and cause bulging.

It may be that the lack of tire pressure at high speeds leads to excessive wear of the cord or wire.

It is possible that the sidewall and medium-sized stones or bumps are scratched. Excessive wear of the cord or steel wire, or partial hanging of the tread, resulting in uneven force.

Many of them are caused by broken cords.