What direction should the end of the rope be tied to the flagpole

You face the red flagpole, the end of the red flag is on your left, and the end of the flagpole is on the right, you.

1. During installation, a 10mm thick iron plate should be placed on each of the concrete foundations facing the four calibration bolts, which can effectively strengthen the stiffness of adjusting the verticality;

2. The following is to install the upper end of the flag: firstly, the wire rope head is penetrated from top to bottom by the small hole at the upper end of the flag, and then the wire rope is passed through the flag ring, and the wire rope is threaded out of the counterweight rod after the plastic cap is tightened, and fixed at one end of the spring.

Plastic parts are fixed: the plastic parts are aligned with the screw hole and screwed into the counterweight rod, the self-tapping screw is on after aligning the hole, and then the flag rope is pulled out, and there is a rectangular window at the appropriate height of the flagpole (about 1 2m from the horizontal plane). Reach into the window, pull out the flag rope, and hang the flagpole to the top time stop position;

3. Install the mounting hole of the limit slider panel, pull the flag piece up to the top, be sure to pull it to the top and then pass the limit block through the wire rope to fix the window position. Fixing the flagpole in this way can make the flagpole safe and reliable in future use, and avoid the accident of flagpole collapse to the greatest extent.

There are different ways to fix the stainless steel flagpole according to the individual's habits, as long as the flag is fixed safely. One of the most commonly used methods is to thread the wire rope head through the small hole at the upper end of the flag piece from top to bottom, then pass the wire rope through the flag ring, then tighten the plastic cap, and finally thread the wire rope out of the counterweight rod and fix it at one end of the spring.

Secondly, you can also use fixing parts to fix the flagpole, align the plastic parts with the screw hole, and screw it into the counterweight rod, and after aligning the hole, the self-tapping screws are added. Pull out the flag rope, at the appropriate height of the flagpole, generally from the horizontal plane, there is a rectangular window. Reach into the window and pull the flag rope out.

When the flagpole is hung to the top, the limit block is positioned. No matter which of the above methods of fixing is indispensable, a special hole is indispensable, and this hole is designed for the fixing of the flag.

Summary. Hello dear. Yes, it is necessary to fix the top of the flagpole and pull it with a stable rope to ensure the stability and safety of the flagpole.

Hello dear. Yes, it is necessary to fix the top of the flagpole and pull it with a stable rope to ensure the stability and safety of the flagpole.

The fixing method of the flagpole: 1. When installing, a 10mm thick iron plate should be placed on the concrete foundation opposite the four calibration bolts, which can effectively strengthen the stiffness of adjusting the verticality; 2. The following is to install the upper end of the flag: firstly, the wire rope head is penetrated from top to bottom by the small hole at the upper end of the flag, and then the wire rope is passed through the flag ring, and the wire rope is threaded out of the counterweight rod after the plastic cap is tightened, and fixed at one end of the spring.

Plastic parts are fixed: the plastic parts are aimed at the screw screw hole and screwed into the counterweight rod, the self-tapping screw is on the hole position, and then the flag rope is pulled out, and there is a rectangular window at the appropriate height of the flagpole (about 1 2m from the horizontal plane). Reach into the window, pull out the flag rope, hang the flagpole to the top, and the block is envied; 3. Install the mounting hole of the limit slider panel, pull the flag piece up to the top, be sure to pull it to the top and then pass the limit block through the wire rope to fix the window position.

Fixing the flagpole in this way can make the flagpole safe and reliable in future use, and avoid the accident of flagpole collapse to the greatest extent.

The detailed introduction of fixing the top of the flag limb celery pole with a stable reputation and hunger royal rope is as follows: first, tie the stable rope to the top of the flagpole, then pull the stable rope to the ground, and tie the stable rope to the fixed point on the ground to ensure the stability and safety of the flagpole.

Do you have anything to say?

There are a lot of talks about fixing the top of the flagpole with a stable rope, such as why to fix the top of the flagpole with a stable rope, how to correctly fix the top of the flagpole with a stable rope, and fix the top of the flagpole with a stable rope to pull the ridge of a good hole and field companionship.

The purpose of fixing the top of the flagpole is to ensure the stability and safety of the flagpole to prevent the flagpole from shaking or collapsing due to the action of wind or other external forces.

The steps to correctly fix the top of the flagpole and use a stable rope to pull it are as follows: first, tie the stable rope to the top of the flagpole; Secondly, the town pulls the rope to the ground; Finally, tie the rope to a fixed point on the ground to ensure the stability and safety of the flagpole.

There are many advantages of fixing the top of the flagpole and pulling it with a stable rope, such as: it can effectively prevent the flagpole from shaking or collapsing due to wind or other external forces; It can effectively prevent the defeat of the nuclear flagpole from being damaged by shaking; It can effectively prevent the flagpole from affecting the aesthetics of the flag due to shaking; It can effectively prevent the flagpole from shaking and affecting the publicity effect of the flag and so on.

The height of the flagpole is about 19 meters, and if the piling foundation is very troublesome, the top is pulled with a stable rope.

Hello dear. In the case of a flagpole height of about 19 meters, you can use a stable rope to pull the top of the flagpole to ensure the stability and safety of the flagpole. However, in this case, a stronger rope should be used as much as possible to ensure the stability and safety of the flagpole.

From the rope on the belt pole of the flag destruction to the ground, there is an extra 1 meter of reeds, which can be seen.

Rope length = flagpole + 1 meter remaining buried.

There is also the lower end of the rope pulled open after 5 meters from the bottom of the ground, and the end of the taut rope is just to the ground, at this time.

The flagpole and rope length are 5 meters to form a right-angled triangle, and the hypotenuse is the rope length.

The square of the rope length = the square of the flagpole + 25

Let the rope length be x and the flagpole be y, and solve the system of equations.

x=y+1x^2=y^2+25

Get flagpole y=12

If the flagpole is x high, the rope length is x+1

Then there is x 2+5 2=(x+1) 2.........Pythagorean theorem.

x^2+5^2=x^2+2x+1

x=(25-1)/2

So the flagpole is 12 meters high.