What are the characteristics of disc sandblasting machine? What are the advantages of a turntable sa

1. Generally speaking, the sandblasting effect is mainly determined by the parts material and sandblasting abrasive. According to the different parts and materials, the sandblasting abrasive material is different, the size and size of the sandblasting abrasive are different, and the sandblasting effect is different. Users can choose sandblasting abrasives according to the characteristics of the product and the process of the product.

2. Determine the type of equipment for production efficiency. According to the processing capacity, choose automatic sandblasting production line, semi-automatic sandblasting equipment, press-in sandblasting machine, suction sandblasting machine and other sandblasting equipment. 3. The size of the workpiece determines the equipment specifications.

Choose the size of the cabin according to the size of the workpiece so that there is enough space to complete the processing work. 4. Selection of sandblasting abrasives. Sandblasting abrasives are metal or non-metallic, such as steel jade sand, glass sand, resin sand, walnut sand, steel grit, steel shot, etc.

According to the process done in the early stage, the type and specification of sand are selected

Sandblasting machine with turntable, the working principle is:

The workpiece is manually clamped on the small turntable fixture, the small turntable is driven by the rotation of the large turntable to move to the sandblasting processing site, the turntable is stopped by the stop device and stops rotating, the workpiece is driven by the small turntable to rotate slowly, and the spray gun is divided into two groups of reciprocating swings up and down to carry out sandblasting processing on the surface of the workpiece, so as to ensure that the workpiece is sandblasted evenly.

After the processing is completed, the stop cylinder is retracted, the large turntable rotates, and the workpiece is taken out from the pick-and-place area, and the next processing program is cycled to form a continuous working state. What are the advantages of a turntable sandblasting machine? Turntable sandblasting machine is also known as disc spraying virtual sand machine, round pipe automatic sandblasting machine, Huachuang sandblasting machinery and equipment factory for you to sort out the following advantages:

01. The large turntable rotates intermittently, the small turntable rotates, and multi-station processing at the same time.

02. The sprinkler group can move horizontally and vertically, and can also swing at multiple angles.

03. The sandblasting time can be adjusted.

04. Man-machine interface control can be set.

05. Adopt PLC and touch screen control unit, stable operation and high effect.

06. The spraying group can move horizontally and vertically, and can also swing at multiple angles.

07. Abrasives are automatically recycled, and the energy consumption is low.

08. The nozzle is made of special boron carbide resistant material, which has a long service life.

09. The PLC electrical control system is adopted, with a high degree of automation, good stability, and a low failure rate.

10. The turntable automatically rotates continuously, and the operation is stable, which ensures the balanced consistency of the product sandblasting effect.

11. According to the size of the workpiece, it is equipped with special tooling fixtures, which is fast, stable, efficient and large.

12. The introduction of foreign advanced technology, the integration of years of production experience research and development.

13. Independent dust removal system, environmental protection and pollution-free.

Summary. If it is a grinding plane, the disc sand machine is more advanced than the sanding machine, and the disc sand has holes that can vacuum the advantages and disadvantages of the disc sanding machine, square plate sanding machine and belt grinding machine.

If it is a grinding plane, the disc sand machine is more advanced than the sanding machine, and the disc sand has holes that can be vacuumed and grinded the floor for renovation?

It is recommended that you use a disc sanding machine.

Is it possible to use an angle grinder to grind the disc?

Yes. Thank you.

You're welcome. Do you have experience grinding floors?

Grinding the floor is not often grinding, mopping the floor I mop every day.

1. The operation is simple and the efficiency is high, and the sand with different particle sizes can be replaced according to the process requirements of different Zhaoqingye, and the sand can be automatically recycled to save costs.

2. The workpiece will automatically enter the sandblasting area and blast according to the requirements, and the sandblasting time can be set by the sandblasting effect as needed.

3. The spray gun adopts the way of moving up and down, and can fine-tune various spray angles to achieve good processing results.

4. This machine is equipped with a cyclone separator, which can effectively separate the positive difference between abrasive and dust, and reduce the loss of abrasive.

5. It is equipped with a filter dust collector, which can remove the dust generated in the work.

6. All actions are controlled by PLC. There are three states: automatic, stop and manual, which are automatically used for sandblasting operations; Stop for rest; Manual is used for maintenance operations, each mechanism can be operated by a button separately, and related mechanisms call each other locks. There are 2 emergency stop buttons to prevent accidents from happening.

The above is the experience of Tojiu Machinery.

The working principle of the rotary plate sandblasting machine.

This machine adopts suction type sandblasting, that is, the compressed air is used to flow at high speed in the spray gun to produce a triggering effect, and the abrasive in the cyclone tank is sucked into the spray gun through the hose, and then sprayed to the surface of the workpiece by the nozzle at high speed with the compressed air flow to achieve the effect of sandblasting.

After spraying out, the abrasive falls back into the sand bucket for recycling. The dust generated during sandblasting is pumped out by the dust collector of the dust removal box, and separated by the separator, and the good abrasive accumulates to the bottom of the separator and falls back to the sand reservoir for recycling. The dust is separated by two stages and sucked into the cyclone separator and the dust collection trolley.

The workpiece is clamped on the small turntable fixture, when the small loading plate is driven by the large turntable to move to the sandblasting processing station, the workpiece is driven by the small turntable to rotate slowly, and the spray gun does two groups of up and down to carry out sandblasting processing on the surface of the workpiece of the processing station, after the processing is completed, the pneumatic door is automatically opened, and after the workpiece is clamped after the pick-and-place workpiece is completed, press the running start button, the large turntable rotates, and the cycle can be repeated. The pneumatic lifting door is used for the inlet and outlet of the workpiece, which can be automatically opened and closed when the workpiece enters and exits. The machine is equipped with 2 workpiece pick-and-place stations, 2 workpiece processing stations, and a total of 8 spray guns.