How to look at the rearview mirror skills when reversing into the garage

Updated on Car 2024-08-07
8 answers
  1. Anonymous users2024-02-15

    In the mirror, I saw that the corner of the library line was about 2 cm away from the rear bumper, and the steering wheel was hit to the end. If it is larger than 2 centimeters, you don't need to move, and you can return to the steering wheel a little smaller than 2 centimeters.

  2. Anonymous users2024-02-14

    Reversing to look at the rearview mirror skills** are as follows:

    First of all, we adjusted the left and right mirrors to such a position that both the front and rear door handlebars and the contour of the rear wheels (orange) can be seen.

    In the process of reversing into storage, the front grinding direction to which to play, the rear of the car to swing to which side, and the front of the car is the opposite direction of the swing, so you can see the swing direction of the left rear wheel through the left rearview mirror to judge whether the direction is straight. It can also be judged by looking at the distance between the body and the library edge line in the left and right mirrors.

    However, due to the reason of the difference in the distance between the mirrors, in the case of the same distance between the two sides, the left rearview mirror (finger position) is wider than the right rearview mirror (2 finger positions), and the body line in the right rearview mirror is not parallel to the yellow line, while the left rearview mirror is parallel.

    Special reminder: If the distance between any side of the left and right body is too narrow, after returning to the steering wheel, if the body is positive, there is no point in adjusting, and the body is easy to get out of the line. The only way to do this is to judge the trend of rear movement in advance and adjust the steering wheel in advance.

    The following are the tips for reversing and warehousing**:

    1. Invert the right library.

    1) Step on the clutch, hang the reverse gear, let go of the brake, lift the clutch lightly, and slowly reverse backwards;

    2) Observe the left rearview mirror, and when the lower edge of the rearview mirror coincides with the dotted line, quickly finish the direction to the right;

    3) In the process of the car slowly reversing, observe the right rearview mirror, and return to the right direction when the right body is about 30cm away from the corner of the warehouse;

    4) Observe the right rear wheel through the right rearview mirror, and when the right rear wheel is on the extension line of the library, hit the direction to the right.

    5) Observe the left rearview mirror, when you see the corner of the warehouse, return to the right direction and slowly enter the warehouse;

    6) When the lower edge of the left rearview mirror coincides with the yellow line in front, stop the car.

    2. Invert the left library.

    1) Reverse gear shift, hit the left turn signal, the car moves slowly, observe the left rearview mirror, and when the left rear wheel is out of the corner, quickly hit the left direction;

    2) The front of the car is positive, the direction quickly returns to the right, when the left side of the rearview mirror is 20cm away from the yellow dotted line, stop;

    3) Shift the reverse gear in one gear, pay attention to the left rearview mirror while reversing, and when the lower edge of the rearview mirror coincides with the dotted line, quickly finish the direction to the left;

    4) Observe the left side mirror, when the left side of the body is about 30cm away from the library angle, back to the direction of the circle;

    5) Observe the left rear wheel through the left rearview mirror, and when the left rear wheel is on the extension line of the library, hit the left direction.

    6) Observe the right rearview mirror, when you see the corner of the warehouse, return to the right direction and slowly enter the warehouse;

    7) When the lower edge of the left rearview mirror coincides with the yellow line in front, stop the car.

  3. Anonymous users2024-02-13

    The method of reversing to the right in the left rearview mirror was successfully tested in three cars and two venues. Now I'll tell you the main points:

    1.When the lower frame of the left rearview mirror covers the parking dotted line, it will be killed to the right, and the half-clutch state will slowly continue to retreat;

    2.Look in the upper left corner of the library from the left rearview mirror. Attention. In the mirror, when the left line comes out with two fingers (the actual distance is 20 cm), turn back half a circle and continue to slowly retreat.

    3.When the whole left library line just comes out, turn it back to the right direction. In this case, fine-tuning is made according to the distance between the body and the library line. If you need to move in any direction, turn in that direction and immediately turn back to the right direction.

    4.When you see that the front line of the garage coincides with the lower edge of the left rearview mirror, stop and complete the right reverse garage.

    Whether you turn right or left (backward or forward), you can look in the left rearview mirror.

    My experience is as follows:1. Conversely, when the vehicle slowly starts the half-clutch state of the stop line, observe the window grille in front of the column in front of the right rear triangular window.

    When the window grille touches the right line of the garage (which can be moved forward appropriately), immediately shoot to the right at a constant speed, and then move your eyes to the left rearview mirror, paying attention to the left front corner of the body and the garage (if the distance is less than 20-30cm, turn back to some directions appropriately, if the distance is large, don't care). While.

    2.Downward: When the vehicle in the garage slowly leaves the garage in a semi-clutched state, when the driver's body is in line with the front side line of the garage, the banquet gives way to a left turn (about a quarter of a turn, with the steering wheel at one o'clock) and continues to move forward.

    When the vehicle is parked on the left side of the garage parking line, it is the right side of the body, do not move the direction, return the original way, or observe the relationship between the body and the left front corner of the garage (the distance is less than 20-30cm, return appropriately.

    In conclusion, the first point of reversing into a warehouse is important. If you play early, go back for half a lap or a lap. If you play late, you don't have to go back.

    Pour into the warehouse, but early is not as good as late, you can set the direction early, and you can only resign yourself to fate when it is late. Reversing the warehouse on the left usually refers to how to get out and how to get in. Look in the left rearview mirror.

    If the distance on the left is small, walk back half a circle and enter the warehouse immediately.

    Millions of car purchase subsidies.

  4. Anonymous users2024-02-12

    Judging from the rearview mirror, the correct image of the body parallel to the library line should be "narrow at the top and wide at the bottom", showing a trapezoidal shape. Because the domestic driver's seat is on the left, the image in the rearview mirror should be burning, and the left side is slightly wider than the right side. If you see from the rearview mirror that the body is completely parallel to the library line, the body will naturally be crooked after getting out of the car.

    When the half-clutch state of the vehicle stop line slowly begins, observe the window grille in front of the pillar in front of the right rear triangular window. When the window grille touches the right line of the garage (can be moved forward appropriately), immediately kill to the right at a constant speed, and then move your eyes to the left rearview mirror, pay attention to the left front corner between the body and the garage (if the distance is less than 20-30cm, turn back to the right direction appropriately, if the distance is large, immediately turn back to the right direction. When the front row of the garage is in the left rearview mirror.

    When the vehicle in the garage slowly leaves the garage in a half-clutched state, when the driver's body is in line with the front side line of the garage, turn left (about a quarter of a turn, with the steering wheel at one o'clock) and continue on the road. When the vehicle is parked at the parking line on the left side of the garage, it means that the body is also in the right direction, so there is no need to move the direction, and there is no need to observe the relationship between the body and the left front corner of the garage (if the distance is less than 20-30cm, turn back to some directions appropriately, if the distance is larger.

    Millions of car purchases are not too false to subsidize the congratulations.

  5. Anonymous users2024-02-11

    Adjustment of reversing rearview mirror: the right rearview mirror should try to see the right rear wheel clearly, because when reversing into the garage, the distance between the body and the side line should be checked completely through the right rearview mirror, especially whether the right rear wheel will be pressed to the corner of the storage.

    <> 1. Left out of the warehouse.

    1. The left out of the library is almost the same as the right out of the warehouse, when the hood just covers the opposite sideline, play a circle and a half to the left.

    2. After leaving the warehouse, the body continues to move forward parallel to the sideline until the front of the car tilts to the left and crosses the induction line, and then brakes to stop.

    Second, the left storage.

    1. Keep the left dead state and reverse, the speed must be slow, and keep an eye on the left rearview mirror at this time.

    2. The picture seen from the left rearview mirror is: see the garage line - see the left garage corner - the entire garage mouth - the body into storage. At this time, see if the body is parallel to the left trouser line, and once parallel, immediately return to the steering wheel and continue to reverse.

    3. When you see the lower edge of the left rearview mirror from the left rearview mirror and the left outbound line, you should step on the parking lot.

    Three, the right out of the warehouse.

    1. Hang 1st gear, slowly loosen the clutch out of the garage, and when you see that the hood of the front of the car just covers the edge line opposite the garage, hit a circle and a half to the right. Since everyone's height is different, you must find a reference point that suits you when you practice.

    2. When the body is parallel to the sideline, return to the steering wheel and continue to drive forward, the front of the car crosses the induction line, and the distance between the body and the sideline is just in the ideal range, which can ensure that the reversing of the storage does not press the sideline.

  6. Anonymous users2024-02-10

    The skills of reversing into the garage and looking at the mirror are to see the starting point, control the corner point and stick the stop point. Be sure to adjust the position of the rearview mirror before reversing into the garage.

    The position of the mirror: the left and right exterior mirrors or the interior mirrors should ensure that the driver is in a normal driving posture, the ground plane is at half the height of the upper and lower parts of the rearview mirror, and the left and right exterior mirrors should ensure that their body occupies no more than a quarter of the mirror area.

    Reversing into the garage and looking in the mirror.

    Reversing and playing the steering wheel skills:

    Hang the reverse gear, release the handbrake, slowly lift the clutch to semi-linkage, stabilize the clutch after starting, adjust the speed, and reverse backwards slowly; Turn back to the right rear to observe the right rear door triangle window, and when the front center bar reaches the front of the triangle window, quickly move the direction to the right to kill.

    If you observe that the right rear of the car hits the middle bar, quickly turn back to the left a large direction, wait for a while, and continue to hit the right direction when it is estimated that the rear of the car will not touch the middle bar. After the rear of the car enters the garage smoothly, observe the left body line through the left reversing mirror and observe that the left side line is parallel to the left side line, and quickly turn the direction to the left.

    After the front of the car smoothly enters the warehouse, look back at the left reversing mirror body and the side line of the flat ** condition to correct the direction, wide, to the left repair, narrow, to the right repair, after the repair to maintain the direction. But after the body reaches the stop sign position, stop.

    Reversing into the storage mirror.

  7. Anonymous users2024-02-09

    After the car first adjust the angle of the rearview mirror to be able to see the rear wheel extension and the marking on the ground, after the examiner signaled the start, hang the reverse gear to start, observe the right rearview mirror, the right rear corner of the rear of the car is about one meter away from the right side line of the garage when it begins to play clockwise direction, to the rear close to the right side line of the garage door, according to the distance between the two, choose back to the right or deepen. Techniques can also be performed in the absence of training:

    Skill. 1. If you feel that the right rear corner of the rear of the car is too close to the right side of the garage door, then return to the direction of half a circle or a circle, or even return to the right; When it is observed that the distance between the two is moderate, it should quickly fill the direction clockwise until the body is parallel to the boundary of the library and then return to the right.

    Skill. Second, if you feel that the right rear corner of the rear of the car is too far away from the right side of the garage door, you should deepen the direction to make adjustments, and even continue to crack after the body has returned to the source, but correct until the distance between the two is moderate, and then adjust the body parallel to the boundary of the garage.

  8. Anonymous users2024-02-08

    Reversing into the garage to see the detailed introduction of the rearview mirror:

    1. When the lower frame of the left rearview mirror covers the parking dotted line, hit the direction to the right, and slowly continue to retreat in the semi-clutch state.

    2. From the left rearview mirror to see the left library corner out, you need to pay attention, in the mirror, when the left library line out of 2 fingers (the actual distance is 20 cm), back to the direction of half a circle, continue to slowly retreat.

    3. When the whole left storage line just came out, return to the positive direction, at this time, fine-tune according to the distance between the body and the storage line, and need to move the tail in which direction to play in which direction, and return to the right immediately after hitting the direction.

    4. Stop when you see the front line of the library and the lower edge of the left rearview mirror coincide, and complete the right reversing of the library.

    The situation seen in the mirror is: first, I see the left library line, the left library corner, the entire library mouth, and the body is put into storage. At this time, judge whether the body is parallel to the left library line, once parallel, immediately return to the steering wheel and continue to reverse slowly.

    When the lower edge of the left rearview mirror just covers the left outbound line, apply the brakes and stop. Parking in this position ensures that the car is at just the right distance between the front and back in the garage.

Related questions
4 answers2024-08-07

The old iron who learned to remember to double-click to follow.

9 answers2024-08-07

Reversing warehousing method:

Subject 2: Reversing into storage** (taking right reversing into storage as an example). >>>More

12 answers2024-08-07

The rearview mirror can be adjusted regardless of whether it is automatic or manual. Normally, the left rearview mirror is adjusted to the far horizon in the middle of the mirror, the right mirror horizon is three-quarters, and the ground occupies three-quarters. If it is a side park, the right side can be temporarily lowered so that you can see the curb clearly (the car at the high-end point will have the function of automatically flipping down the right rearview mirror in reverse gear), and remember to turn it back after reversing. >>>More

7 answers2024-08-07

The main thing is that you have to adjust the reflector to be OK.