What should I do if my notebook windows won t start

1. See if the laptop has a restore function, and if so, refer to the manual to restore it.

USB flash drive reinstallation system steps:

1.Use U Boot USB flash drive boot disk maker to make a boot U disk;

set to boot from the USB flash drive, and put the previous image into the USB flash drive;

After the disk starts, select the item with a similar meaning of "ghost manual installation" on the boot interface, and select the installation source as the system you put in the USB flash drive, and the installation path is your C disk. Or select PE in the interface,And then there is a one-click installation software in PE (just on the desktop),Select the image you put in U,Install it in your C disk。 A progress window will appear, and you will restart when you are done.

5.After restarting, remove the USB flash drive, and then the machine will be automatically installed by itself, just click "Next" or "OK", until the installation is completed.

Optical Drive Mounting System Method:

1.Please press the F2 key to enter the BIOS settings when you boot the computer, set the boot device priority option under the boot menu to boot the optical drive, and press the F10 key to save and exit.

2.Insert the system installation disk and press any key prompted.

Step 1: First, enter Safe Mode and remove the recently installed driver software.

Boot to WinRE (Windows Recovery Environment), which can be understood as recovery mode.

You can press and hold the power on button until the machine is powered off, then turn it on again, and then power off again, repeat 3-5 times until you enter the recovery mode as shown below.

From the Select options screen, tap or click Troubleshoot.

Tap or click Advanced options, and then select [Startup Settings], ., .,Select [Start], click the safe mode environment you want to enter, and in general, it is recommended to select (4) to enable safe mode.

Second, with the Auto-Repair feature, you can detect and resolve certain system issues that prevent Windows from booting.

To run automatic repair, follow these steps:

Boot to WinRE (Windows Recovery Environment), which can be understood as recovery mode.

You can press and hold the power on button until the machine is powered off, then turn it on again, and then power off again, repeat 3-5 times until you enter the recovery mode as shown below.

From the Select options screen, tap or click Troubleshoot.

Tap or click Advanced options, and then tap or click Automatic repair.

Auto-Repair will launch and attempt to fix Windows to prevent loading.

If the above still doesn't work, try restoring the system, or reinstalling the system.

It should be that there is a problem with the startup item, and it can be solved by resetting the startup item in the BIOS, and the specific operation is as follows:

1.Restart the computer, and when you enter the boot interface, press the F2 key on the keyboard.

2.Enter the BIOS menu interface.

3.With the arrow keys, move the tab to the boot interface.

4.Use the arrow keys to move to the startup item of the system disk, and press F6 to move to the first position.

5.Go to Exit, select the red box, click Enter to save, and restart the computer, and you can enter the system normally.

The various diagnostic methods for the failure to boot the operating system are as follows:

First of all, check whether the computer has started to start the operating system when you turn it on. If the operating system freezes, blue-screens, or automatically restarts when the operating system is booted, the partition table and master boot record of the hard disk are normal, and the fault causes such as the corruption of the hard disk partition table, the corruption of the master boot record of the hard disk, and the loss of the hard disk partition end flag are ruled out. The following method is then used to make a diagnosis.

Step 1: Start the computer in safe mode to see if it can boot, if it can't boot, it may be infected with a virus, system files are missing, the operating system is damaged, the hard disk has bad sectors, the hardware device has a conflict or the hardware has a problem, go to step 4; If you are able to start Safe Mode, it may be caused by the hardware driver being incompatible with the system, the operating system is faulty, or it is infected with a virus.

Step 2: Then run the antivirus software, if there is a virus, it may be caused by a virus, restart the computer after the antivirus, if it is not normal, you need to reinstall the operating system.

Step 3: If no virus is detected, you can use the "System Restore" function of the operating system to restore the system, and if the system is normal after the restore, the failure is caused by system corruption.

If the fault persists, it may be caused by the incompatibility of the device driver with the system; Then delete the drivers of the sound card, graphics card, network card and other devices, and then install the drivers one by one, restart the computer every time you install a device, to check which device's driver caused the failure, find out, ** the new version of the driver of the faulty device, and then install it.

Step 4: If you can't start from Safe Mode, then reinstall the operating system with the installation CD. If you can install the operating system normally, go to 7 steps; If there is a failure when installing the operating system, such as a freeze, blue screen, reboot, etc., which causes the system to be unable to be installed, it should be caused by a hardware problem or a poor hardware contact.

Step 5: Then clean the dust in the computer, clean the gold finger of the memory, graphics card and other equipment, reinstall the memory and other devices, and then reinstall the operating system.

Step 6: If you still can't install the system, it could be a malfunction caused by a hardware issue. Then use the replacement method to check the hardware failure, and replace the hardware after finding it.

Step 7: If the operating system can be installed normally and the fault disappears after installation, it is a fault caused by corrupted system files.

Step 8: If the fault persists after installing the operating system, it may be caused by bad sectors on the hard disk or the device driver is incompatible with the system. If you boot your computer in safe mode, if it doesn't boot, it's a malfunction caused by bad sectors on the hard drive.

Then use NDD Disk Utility to repair the bad sectors.

Step 9: If you are able to boot Safe Mode, it is caused by the incompatibility of the device driver with the system. Then delete the sound card, graphics card, network card and other devices, and then install the drivers one by one, and install one by one to bury the boot once to check which device's driver caused the failure.

1. First of all, under the screen that appears at boot, press the enter key (i.e., enter) directly. 2. Then you will jump to the following interface, and press F8 according to the prompts to enter the advanced options mode. 3. After entering the advanced boot options mode, click the "Disable Driver Signing" option in the menu below, and then press the enter key to confirm, and then you can load the bureau normally and enter the system.

4. After entering the system, our first task is to check and repair the driver, so as to avoid repeated situations in the future when the boot shows that Windows fails to start. 5. If this method doesn't work, you can only reinstall the system. Go to the computer hall that can access the Internet normally to make a U boot disk, and then** a system image of the system, you can install and solve it.

1. Press F8 after the Windows 7 system is running, first try to select the latest correct configuration, if you can't enter the system, then you still restart and press F8, select safe mode to enter the system, and click Start - Run - Enter"msconfig"--Click Start to disable all startup items. Reboot to test whether the system can be entered normally.

2. Use Windows boot disk (must be the installed version of Windows system disc XP or Win7), if the boot problem is caused by the boot record of the active partition or the files used by the operating system boot are corrupted, the boot disk can solve the problem.

Use the U disk to make a 360 emergency disk, use the 360 emergency disk to start the computer, and use it to reinstall the system.

Reboot to try, or it doesn't work, try to see if you can enter safe mode, if it doesn't work, it means that the system is damaged, redo the system.

1. Try to press [F8] when booting up, enter the advanced startup item, select [Last Correct Configuration], and try to enter the system normally;

2. You can also try to use [F8] to enter [Safe Mode with Command Prompt] Enter, you can enter C: Windows System32estorestrui command Enter in the command prompt to try to restore the system;

3. If it still can't be solved, you can try to enter sfc scannow in the command prompt and press enter, insert the original system disk to repair the system, and the system will automatically compare the repaired ones; Or simply reinstall the system.

Step 1: Restart the computer first when the computer cannot enter the system, and press the F8 key to enter the system security mode when restarting the computer. If the laptop doesn't have a reboot button, then press and hold the power button to force it to shut down, and then turn it back on.

Step 2: Then select "Repair Computer", after selecting it, you will enter the system recovery option interface, click Next to continue. A user login screen will pop up, and if your system requires a password, then you will need to enter the password.

Step 3: After entering the OK, you will enter the system recovery option, in this interface we can see the "Boot Repair" option. If you need to do something else, you can also do other options.

Step 4: Select "Startup Repair", then the system will automatically fix the Windows computer that you encounter when you encounter the problem that you can't enter the system when you boot up. For some common problems, the win7 system comes with boot repair that can be fixed.

Step 5: If the above methods can't fix the problem that your computer can't enter the system when it boots up. Then you can also press F8 to enter the safe mode after booting up to enter the safe mode, and select "Latest Correct Configuration" to enter the system.

Generally, laptops have built-in recovery partitions, enter recovery mode according to the manufacturer's shortcut keys, and restore factory settings. Either boot with the boot disk and then reinstall the system.

If it doesn't boot at all, then reinstall the system.

There are a lot of software to reinstall the system online, just find a free one-click reinstall software to install, and now the operation is very simple.

1. Try to press [F8] when booting up, enter the advanced startup item, select [Last Correct Configuration], and try to enter the system normally; 2. You can also try to use [F8] to enter [Safe Mode with Command Prompt] Enter, you can enter the C: Windows System32estorestrui command in the command prompt to try to restore the system; 3. If you still can't solve the problem, you can try to enter sfc scannow in the stool punch command prompt and press enter, insert the original system disk to repair the system, and the system will automatically compare the repaired ones; Or simply reinstall the system. 178 Likes Chicken thighs.

Summary. 1Try to enter the repair mode: If you are able to enter the boot menu of your computer, you can try to select "Repair Mode" to enter the system.

In repair mode, you can use a command-line tool to repair the system, or use a recovery tool to restore the system to a previous state. 2Try to repair the system with an installation disk: If you have a Windows installation disk, you can try to repair the system with an installation disk.

When using the installation disk, you can select Repair Computer, and then follow the prompts. 3Try using a system recovery point: If you've created a system recovery point on your computer before, you can try using a system recovery point to restore your system.

System recovery points can help you restore your computer to a previous state, and if something goes wrong after the recovery point was created, you can use it to fix it. 4Try to use the "Reset" function: If none of the above methods work, you can try to use the "Reset" feature of Windows.

It can be caused by a hardware or software problem with your computer. Here are a few things you can try to solve this problem.

I'm still a little confused, can you be more detailed?

1Try to enter the repair mode: If you think you can enter the boot menu of the computer, you can try to select the "repair mode" to enter the system. In repair mode, you can use a command-line tool to repair the system, or use a recovery tool to restore the system to a previous state.

2Try to repair the system with an installation disk: If you have a Windows installation disk, you can try to repair the system with an installation disk. When using the installation disk, you can select Repair Computer, and then follow the prompts.

3Try to use a system recovery point: If you have created a system recovery point on your computer before, you can try to use a system recovery point to restore the system. A system recovery point can help you restore your computer to a previous state, and if you don't have a problem after the recovery point is created, you can use the recovery point to fix it.

4Try to use the "Reset" function: If none of the above methods work, you can try to use the "Reset" feature of Windows.