How can the Tiguan high beams stay on

FAW-Volkswagen Tiguan high beam continues to be on, you need to start the FAW-Volkswagen Tiguan engine first, and then connect the electronic system of the FAW-Volkswagen Tiguan whole car, FAW-Volkswagen Tiguan high beam continues to be on, the specific operation steps are as follows:

1. Open the door of the FAW-Volkswagen Tiguan driver.

2. Press the brake pedal of the FAW-Volkswagen Tiguan to prepare to start the engine.

3. Press the one-button start button of FAW-Volkswagen Tiguan.

Fourth, the instrument lights of FAW-Volkswagen Tiguan are all lit up, which proves that the engine is started.

5. Press the high beam button of the FAW-Volkswagen Tiguan next to the steering wheel.

Sixth, the FAW-Volkswagen Tiguan high beam is turned on, as long as the switch is not turned off, as long as the vehicle is not powered, the high beam will continue to be on.

Pulling it in to the end is the light horn, which is the high beam is instantly connected. For temporary lighting. Or in the section where it is inconvenient to honk the horn, frequently pull in, alternating between high and low lights, attracting the attention of the car or people in front.

Push forward to the head, it is a long time high beam... Pull it back in, and it's the low beam.

However, when driving into well-lit sections, following cars for a long time, meeting cars, and meeting non-motorized vehicles and pedestrians on narrow roads, they must switch to low beams. If you frequently shake your headlights at an oncoming car or suddenly turn on your high beam, pay attention to whether you forget to turn off your high beam. Forgetting to turn off the high beam is one of the mistakes that newbies tend to make.

The switch of the lights in the Volkswagen car is generally above the middle of the driver's seat and the passenger seat, and the light switch in the car has several modes that can be switched. You can adjust the switch to turn on when you open the door, so that it is more convenient to close the door and other times when it is not lit, and you can also choose the mode of the interior light according to your own needs.

The lighting system in the car generally has three modes, normally open, normally closed, and the door opening light is on. It is possible that the switch is turned on normally and the light cannot be turned off; It is also possible that the switch is broken and the light is always on; It may be a problem with the line.

The voltage and resistance of the line need to be checked; Another is to turn the door opening light on, and it will take a while to turn off after getting into the car, so sometimes it is not the cause of the light damage.

Some cars have many functions in the interior lights, and they need the small icon of the lighting button in the car to judge the function, but if it is the reason why the switch is broken, you need to go to the 4S shop or the maintenance staff of the repair shop to help repair and replace it.

The Tiguan light control knob is located in the lower left corner of the steering wheel, and turning the knob switch to the 0 position turns off all lights. In addition, the Toggle Switch of the Tiguan High and Low Lights is also the control lever on the left side of the steering wheel, and when the low beam is turned on, push the light lever forward to turn on the high beam, and dial back to turn off the high beam.

How to turn off the Tiguan lights.

Generally speaking, low and high beams are called car headlights. As long as the light switch is screwed to the low beam position, the low beam can be lit, and in daily driving, the owner only needs to turn on the low beam to meet the needs of use. However, there are special cases where there are no street lights on the side of the road or if the road is straight and far away and the line of sight is dim, please use high beams.

The use of high beams is generally by dialing forward or inward, dialing forward, and turning on the high beams all the time; Flick it inward, and the high and low beams flash. When the high beam is used, if you encounter the return of the car, you must turn off the high beam, wait for the car to end and then turn on the high beam, so as to avoid your high beam shaking to the other driver's line of sight and causing accidents, which is also the standard of civilized driving.

The car light is also the width indicator lamp, the width indicator light is a kind of warning sign of the car lamp, white in the front and red in the back, generally installed at the edge of the top of the car, so that it can indicate both the height and width of the car.

Hello friends, there is a switch above the front row, there are several switch modes on it, you adjust the switch mode to open the door symbol, only when the door is opened, it will not be lit at other times, you can try again to have no effect, a little suggestion I hope it will help you, hope!

W19 and W13 switches, these two switches can be turned on or off on or off separately

Hope it helps, hopefully!!

Volkswagen Tiguan inner light off method: generally there is a switch above the front row, there are several switch modes on it, and you can turn it off directly when you find the switch. You can also adjust the switch to brightness when you open the door sign, but not at other times.

SAIC Volkswagen's all-new Tiguan L is a successor to the current Tiguan, which is based on Volkswagen's MQB platform along with the overseas version of the all-new Tiguan.

On the outside, the Tiguan L maintains a similar design to the standard Tiguan model overseas, with a clean and crisp overall style, with some chrome trim added to the standard wheelbase model, and a change in the shape of the C-pillar. The Tiguan L has a length, width and height of 4712 1839 and 1673 mm, and a wheelbase of 2791 mm.

The Tiguan L PHEV is the SAIC Volkswagen Tiguan L plug-in hybrid version, the overall shape is basically the same as the Tiguan L, the details are different, the newly designed upper grille is inlaid with the blue PHEV logo, and the C-type LED daytime running lights are exclusive to the plug-in hybrid version.

In terms of power, the all-new Tiguan L offers two powertrains, 330TSI and 380TSI, respectively, with a displacement of the third-generation EA888 turbocharged engine.

Among them, the former has a maximum output of 180 horsepower and a peak torque of 300 Nm; The latter has a maximum output of 220 hp and a peak torque of 350 Nm. In addition, the 380TSI model is equipped with Volkswagen's 4 Motion all-wheel drive system and has a driving mode selection function.

Press the brake pedal of the Volkswagen Tiguan.

2. Press the one-button start button of the Volkswagen Tiguan.

3. The instrument of the Volkswagen Tiguan lights up, and the power supply of the whole car is turned on.

4. Rotate the switch of the headlights of the Volkswagen Tiguan to the Auto gear, turn on the automatic headlights, and the lights are controlled by the light-sensitive sensor.

5. Rotate the switch of the headlights of the Volkswagen Tiguan to the small light gear and turn on the light profile.

The body is the part of the vehicle that is used to load goods or passengers, and is the basis for the installation and connection of other components of the vehicle. The body of the early vehicles was mainly made of wood, supplemented by steel plates, bow rods, etc. In modern times, the car body is mainly steel structure or light metal structure.

The main components include side walls (walls), end walls (walls), roofs, etc. The steel structure of the car body is composed of many longitudinal beams and transverse beams (columns), and the underframe of the car body is supported on the bogie by the heart disc or side support. The steel structure of the car body bears the self-weight, load, curb weight and vertical dynamic load caused by the impact of the wheel and rail and the vibration on the spring; Longitudinal loads such as traction and compressive impact forces generated between vehicles when the train starts, changes, and goes up and down ramps; As well as lateral loads including wind, centrifugal force, and the pressure of the cargo on the sidewall.

There is a switch above the front row, there are several switch modes on it, you turn the switch to open the door symbol and it will only light up when it is open, and it will not light up at other times. [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

1. First of all, in the Volkswagen Tiguan.

On the left side of the center console in the cab of your vehicle, locate the high beam height adjustment knob as shown in the image below.

2. Volkswagen Tiguan Stuffy Vehicle High Beam Height Adjustment Knob Adjustment Knob to "-" gear is the lowest height gear, see the figure below.

3. Volkswagen Tiguan vehicle high beam height adjustment rotary ant Xiao search button to "1" headlight height to increase one gear, see the figure below.

4. The height adjustment knob of the high beam of the Volkswagen Tiguan vehicle is adjusted to the "2" gear, and the light height is relatively high, as shown in the figure below.

5. Finally, the height adjustment knob of the high beam of the Volkswagen Tiguan vehicle is adjusted to the "3" gear, which belongs to the highest gear, as shown in the figure below.

Hello In this case, the headlight adjustment bolt should be adjusted, it is recommended to go to a professional maintenance shop to adjust, and you may get more and more messy.

FAW-Volkswagen Tiguan.

If the high beam is continuously on, it is necessary to start the FAW-Volkswagen Tiguan engine first, and then connect the electronic system of the FAW-Volkswagen Tiguan whole car

1. Open the door of the FAW-Volkswagen Tiguan driver.

2. Press the brake pedal of the FAW-Volkswagen Tiguan to prepare the leather to start the engine.

3. Press the one-button start button of FAW-Volkswagen Tiguan.

Fourth, the instrument lights of FAW-Volkswagen Tiguan are all lit up, and they are held to prove that the engine is started.

5. Press the FAW-Volkswagen Tiguan on the steering wheel.

Next to the high beam button.

Sixth, the FAW-Volkswagen Tiguan high beam is turned on, only the finch lead is not turned off, as long as the vehicle is not powered, the high beam will continue to be on.