TP Link can t connect to my phone, what should I do?

Is it wireless and can't connect? Or are you already connected and can't get online? The browser entry account password is adminOn the left, click Wireless Settings - QSS Security Settings. The QSS function is disabled. That's it.

Follow the steps below to check:

1. Check the manual of the wireless router or the product nameplate posted on the wireless router (that is, the information sign that sticks the manufacturer's trademark, product parameters and other information signs) to find the login and password of the wireless router.

2. Enter the wireless router settings interface through the default access of the computer and find it"Wireless setup"Check to see if it's normal"Turn on the wireless function", in"Wireless security settings"to set a password for Wi-Fi.

4. The SSID broadcast name of the router cannot contain Chinese characters or non-standard characters.

5. Try a different type of encryption for the router's wireless password.

6. Change the wireless mode of the router to 11N Only or 11G Only, and do not use mixed mode.

7. Cancel the router security settings with filtering, binding or restrictions.

5. Confirm that DHCP is turned on on the router and the phone uses the default settings.

If the TP-Link router itself is not connected to the Internet, there will be a problem that the computer and mobile phone can connect to the WiFi of the TP-Link router, but cannot access the Internet after connection.

Just make sure that your TP-Link router can access the Internet, and your computer and mobile phone will be able to access the Internet naturally after connecting to the WiFi of the TP-Link router. Therefore, please troubleshoot the reason why your TP-Link router cannot access the Internet and solve it in a targeted manner.

Open the TP-Link security app installed on your mobile phone and enter the registered TP-Link ID and password. If you do not have a TP-Link ID, please click "New User Registration" to register and log in again.

2. Add a camera.

3. Determine the indicator light.

Check to see if the camera's indicator light is flashing red and green, alternately flashing red and green means that the camera is ready to be configured. If not, factory reset the camera.

Reset method: Use a sharp object to press and hold the reset hole next to the SD card slot for about 5 seconds to restore the camera out of the mess factory settings.

4. Enter the wifi password.

The security app will automatically detect the name of the wireless signal connected to the mobile phone, please enter the password of the wireless signal in the password box. In order to ensure that the password entered is correct, you can click on the small eye on the right side of the password bar to display the password to confirm.

5. The addition is successful.

After about 20 seconds, the app interface shows that the camera has been added successfully, and it will automatically return to the device list interface. If there is an SD card format reminder, please click Format SD card, and click the device to enter the preview interface to see the real-time monitoring screen.

Once you've successfully logged in, there's a setup wizard on the left-hand side, then click Next.

Select Let the router automatically choose how you want to surf the Internet, and then click Next.

Use dial-up to access the Internet and select PPPoE (ADSL Virtual Dialing), and then click Next.

The SSID is the wireless name, enter the wireless settings, the PSK password is the wireless password, and it needs to be more than 8 digits, and then click Next.

Wait until the setup is complete, just follow the prompts to restart the route.

First of all, reset the router, restore the factory settings (very important), connect with the router WiFi through the mobile phone WLAN (there is no wireless password by default after reset), and then set it up again.

TP Link's router, unable to log in on the mobile phone, how to solve 1, the mobile phone needs to be connected to the router's WiFi.

2. Manage with a mobile browser.

3. The default management address account password is behind the router.

Log in to the router management address based on the information on the back of the wireless router (including the router IP address, login username and password).

In the router management interface, switch to the "Wireless Settings" tab and click the "Wireless Encryption" item, where you can set the "Safe Mode".

Click on the "Safe Mode" drop-down list and select the "WPA2-PSK" item from its extended list, which is a secure encryption mode that all phones support.

Click the "OK" button to save the settings. Finally, switch to the "System Tools" tab and click the "Restart Router" button to restart the router.

Finally, you can try to use your mobile phone to connect to the wifi hotspot, if the fault still exists, it is recommended to change to other "safe mode" type to try to solve it.

If it still doesn't work, it's a router problem, just replace the router.

1. It is recommended to use a laptop or other mobile phone to try to surf the Internet through the router, or change a routing device to try to see if you can surf the Internet normally.

2. If you use other devices and other routers, but this router is connected and can't be on, you can enter the phone into Settings > More Settings > Factory Settings - Restore All Settings to try it. If you still can't get online, reset the wifi.

3. If the route used is not set up with a password in advance, it can be connected normally, and the mobile phone will still display the connection status after encryption, but it is not possible to access the Internet at this time, you need to click to forget the network and then connect, at this time it will prompt you to enter the password set.

Mine is tp-like, there is no problem after the first setting, mobile phones and computers can access the Internet, so first rule out whether it is a problem with the equipment, if the computer can use the mobile phone can not be used, it means that there is no problem with the device, then you check the mobile phone, mobile phone GPRS Internet access is normal, if it is not normal, it is the problem of the mobile phone, if you can access the Internet, then the mobile phone is no problem, it is the problem of your device settings, so it is recommended that you restore the device to the default settings, according to the manual The method is reset, don't change other things, just set up the wireless router and see if it can be fixed. Good luck.

The router can be connected but the network is not available, which is generally caused by multiple situations, one is that the router does not set up a broadband account or the network cable is not connected correctly, and the other is that the broadband is faulty.

1. If the line is installed incorrectly, you can reinstall it, and you can refer to the method shown in the following figure for wiring.

2. If the router does not set up a broadband account to connect, you can directly log in to the router background to set up, you can directly use the mobile phone to set up, and after the mobile phone is connected to the wireless network, open the browser and enter the login address and login password of the router to log in to the router background.

4. If the router has set up a broadband account and password and still can't use the network, check whether the network cable between your broadband cat and the router is normal, if it is normal, please check whether your broadband cat indicator is normal If there is PON or LOS flashing, it is a broadband failure, at this time, you need to call the operator's customer service directly to report the fault, and there are staff to come to the door for maintenance 48 hours after the successful fault report.

1. There is a problem with the wiring.

2. There is a problem with the setting, and the successful setting is not the correct setting.

3. Set it up again.

Set up success just what you think, look where it went wrong!