-
Add salt to the newly bought kettle, the salt can sterilize, thoroughly soak and remove the smell of the inside of the kettle, and put the tea leaves into the kettle, and the tea leaves can effectively remove the odor. Place the tea leaves in a pot and steep them for a day or two after that. Later, when the tea is boiled, there will be some fresh fragrance, or the tea leaves can be boiled directly in the pot.
If you use tea, don't wash it with dish soap. Crush the tea leaves and pour them into the kettle, scrub the kettle with the broken tea leaves, and add water to soak for a while. Then pour it out and wash it again.
Vinegar can effectively remove odors, but you must not put too much, as too much will corrode the kettle. Heat with a small amount of vinegar, then pour it off and wash it again with clean water.
Wash the newly bought kettle with dish soap or alkali, then add clean water and put a certain amount of milk in the water, stir well with a spoon, and then shake the kettle vigorously. Shake it every minute, repeat it two or three times, and finally wash it off with water.
Orange peel has the effect of removing odors, and it can also remove odors from hot water bottles. Fill the kettle with water, add an appropriate amount of orange peel and soak for a while. Then discard and rinse with water.
Grapefruit peel is just as effective as orange peel in removing odors. The method is the same as orange peel, just soak it in a kettle for a while.
-
Soak it in water, and then boil the first pot of boiling water, and it is best not to drink the boiling water that you boiled for the first time, you can soak your feet!
-
The newly purchased electric kettle removes the odor, and the cleaning method is as follows.
1. Add salt to the new electric kettle, which can sterilize and thoroughly soak and deodorize the inside of the kettle.
2. Add tea leaves, tea leaves can effectively remove peculiar smells. Place the tea leaves in a pot and steep them for a day or two after that. Later, there will be some fresh fragrance when the tea is boiled. We boil the tea directly in the pot for better results.
3. Add water to the maximum engraving position. The depth of the water should not exceed the cut line, otherwise it will overflow when the water boils.
4. Then boil the water with electricity, and finally boil a pot of water, the odor can be removed, and the new kettle can be used normally.
-
The first cleaning method of the newly bought kettle is as follows:1. You can pour detergent into the kettle to clean it, then pour in two spoons of fresh milk, cover the lid and shake it before pouring it out.
2. You can add 2 tablespoons of salt to the water in the kettle, shake it several times, and then boil the salt water and pour it out.
3. Pour thicker tea water into the kettle, and then rinse with water.
4. You can also pour rice washing water into the kettle to rinse.
5. Tips: The newly bought kettle, because the lid and handle are made of plastic, will basically have some taste, so before use, it must be dealt with, otherwise the boiling water will have a peculiar smell.
Description of the characteristics of the electric kettle1) Double-layer insulation, water temperature maintenance for longer periods.
2) The shell is not hot to the hand.
3) Seamless stainless steel liner.
4) The water outlet is locked to prevent pouring scalds.
5) Touchless power switch, safer to use.
-
The first cleaning method of the newly bought kettle is as follows:
1. Rinse the inside of the kettle with clean water first. Then add water to the electric kettle and set it to a limit, turn on the power supply, boil the water, then pour out the water, and repeat the steps three times to drink with confidence.
2. First clean the inside of the kettle with clean water, then add water to the limit, and pour in an appropriate amount of white vinegar or baking soda.
Stir it well, then boil the water and let it sit for five minutes before discarding. Rinse with clean water again, repeat the boiling water and pour it out, and you can use it normally.
Pay attention to the electric kettle, be sure to add water and then use, so as not to dry boil without water, dry boiling is likely to cause damage to the electric heating element, affect the service life of the electric kettle, and even lead to accidents.
-
1. Vinegar cleaning
For the first time, a new thermos can be cleaned with vinegar. Vinegar contains acidic substances, which can be disinfected and sterilized, and its acetic acid ions can decompose harmful metals, add a spoonful of vinegar to the new hot water bottle, and then add two-thirds of the warm water to the bottle, mix and soak for a while, so that the acetic acid ions can play a role.
2. Shake to clean
After soaking the vinegar, you need to shake the hot water bottle to clean, that is, pick up the hot water bottle, shake it up and down repeatedly more than a dozen times, then pour out the cleaned dirty water, and then pour two-thirds of the warm water into the bottle, and shake it repeatedly to clean it several times until the vinegar smell is completely removed.
3. Soak overnight
The cleaned hot water bottle also needs to be soaked overnight before it can be used, that is, fill the hot water bottle with hot water, leave it overnight, and then pour out the hot water overnight, you can remove the deposition of dirt, completely clean the new hot water bottle, and then you can officially use the hot water bottle.
Other cleaning methods
You can also fill half a bottle of water in a boiling water bottle and add 1-2 spoons of salt, shake it a few times and pour it out and repeat this action a few times, which can also play a good role in cleaning.
Fill the new water bottle with some waste tea leaves and pour half of the boiling water, cover the lid and shake it several times for a period of time, then pour out the tea leaves and water in the water bottle, rinse it again with water, you can also clean the new water bottle, and the odor inside will disappear completely.
If you have orange peels at home, you can put some orange peels in it at this time, cover them, store them for 3-4 hours, then pour water into them, cover the bottle and shake it a few times, pour out the orange peel and water inside, so that the boiling water bottle will be much cleaner.
Pour some waste tea leaves into a new water bottle, pour half of the boiling water, cover the lid and shake it several times, the cleaning effect is also very good, and then rinse the water with clean water, you can also put a new clean water bottle, and the smell inside will disappear completely.
-
First of all, you can fill the kettle with cold water, and then boil it, the first step is to eliminate some odors, and the other is to let it boil and then take it to the sun to dry, and you can basically clean it.
-
Rinse it with water first, then wash it with dish soap, rinse it again, fill it with water, boil it with electricity, and pour it out after the water temperature drops for a period of time, and then you can boil the water and use it.
-
The current hot water kettle is 304 stainless steel liner, which is very easy to clean, you can use a clean rag dipped in a little dish soap to scrub evenly, and then rinse it with water.
-
The first time I thought it was okay to boil a pot of boiling water and pour it out after standing still for 1 hour.
-
Just wash it as you would anything else;
In addition, it is best not to drink the boiling water that is boiled for the first time, and it can be used normally later.
-
The newly bought kettle, this first has to boil water to clean is effective.
-
The newly bought kettle is used to boil a kettle of water, no need to clean, and the boiling water cannot be wanted and must be poured out.
-
How do you clean a new kettle for the first time? Boil a pot of hot water first and blanch it repeatedly.
-
What to do with the newly bought kettle?
-
The newly bought kettle needs to be cleaned with milk for the first time, first use dish soap to clean the kettle, then add a small amount of milk to the kettle to shake, or put water and vinegar in the kettle to boil the water, you can also use waste tea leaves to scrub, and then rinse with water.
1. Milk washing
The first time you need to use milk to clean the kettle, first use water and detergent to clean the surface of the kettle, then pour a small amount of milk into the kettle, shake it slowly with your hands, and then rinse it with clean water, the kettle is clean and will not smell.
2. White vinegar cleaning
The newly bought kettle can be cleaned with white vinegar for the first time, mix the white vinegar and water and stir evenly, then pour it into the kettle, boil the water, the stains in the kettle will dissolve in the water under the action of water boiling, and white vinegar can play a role in sterilization.
3. Tea cleaning
The newly bought kettle can be cleaned with tea leaves for the first time, wrap the discarded tea leaves, then wipe the inner wall of the kettle water, and then rinse the kettle with clean water, so that the plastic smell in the kettle will disappear, and it can also be cleaned cleanly.
When cleaning, you need to turn off the power supply and allow the water and bottle to cool before putting your hands into the container. When cleaning the body or plastic parts, use a rag containing detergent to dry and gently wipe the stained area, and then wipe off the detergent with a clean wet rag. >>>More
The hot water kettle can remove water stains, you can pour some vinegar in the kettle, turn on the switch to heat it, leave it for a few minutes, shake it a few times, the water stains will be removed, and then wash it with clean water, you can use it.
The kettle has been used for a long time and there is a lot of scale, teach you a trick, and the scale will run out by itself.
Boiled eggs in a kettle, no need to boil the water, as long as it is cold water, put the eggs in the kettle into the kettle, and. Slowly heat and heat, stop heating when it reaches seventy or eighty degrees, so that the eggs will not fry when they are slowly mature, because the heating speed of the kettle is relatively fast, and the volume of the eggs is relatively large, so the heat conduction will be uneven, and the egg shell will burst, so do not heat the temperature too high, otherwise the eggs are really easy to fry. In addition, the eggs will slowly mature at 60 or 70 degrees, and there is no need to boil them to 100 degrees.
1.The electric kettle is broken, but the power switch is normal, if the power switch is normal, the fault mostly occurs in the insulation switch. First of all, see whether the reed of the bimetal sheet is pressed against the switch contact rod, if it is pressed too tightly, you can use tweezers to bend it upwards until the distance between the two. >>>More