-
Maybe it's a problem with the radiator. Improper application of thermal conductive adhesive can also cause poor heat dissipation and high CPU temperature. Some people above said that the radiator should have a lot of power, but it is not necessarily. My experience is that about 2,000 rpm is fine, and the motherboard adjusts the speed by itself.
It is recommended that you reapply the thermal adhesive to see the effect. If that doesn't work, switch to a different radiator. However, it is difficult to say, if it is all fan heat dissipation, no matter how good the radiator is, it will drop a few degrees, and the water-cooled one is too expensive.
-
CPU temperature is normal between 40-50.
If you run a lot of programs, you can reach a maximum of 60
If it's any higher, it's definitely problematic.
It will lead to blue frequency crashes and other phenomena.
There are 3 possibilities:
1) It's a problem with the CPU fan.
I've lost the fan heat function.
Just go and change it.
2) The fan fan of the case is not very hot. or in a hot environment.
3) Something is wrong with the CPU itself.
The first one is more likely. Now a fan is around 50.
Porphyry. I hope it helps you).
-
The AMD3200 is indeed a bit lower.
And AMD's CPU is suitable for gaming.
If you use more ** software, it's better to use inter.
Also, it is possible that your other configurations are also poor.
Otherwise, if the CPU alone is not good, there should be no restart.
The computer configuration we designed is at least Core 1G RAM and 256M graphics card.
It's not extravagant enough to use apples.
-
Photoshop eats up system resources.
What board do you use, what graphics card, how much memory, if the configuration is very low, you're torturing your CPU, AMD's CPU itself generates a lot of heat, and if you torture it again, it's no wonder that it doesn't strike.
It is recommended to change the high-power radiator to upgrade the graphics card HD4650 with more than 2G memory.
-
Take a look at your other configurations.
-
There is software to check it.
The normal temperature of the CPU.
It is generally stable in the range of 30 degrees Celsius. In other words, the CPU has a harvest temperature of 65 degrees, and the maximum temperature of the CPU is 30 degrees Celsius based on the maximum of 35 degrees in summer. And so on, if your ambient temperature is 20 degrees now, it's best not to exceed 50 degrees on the CPU.
Of course, the lower the temperature, the better. No matter how far you overclock, don't make your CPU more than 30 degrees above the ambient temperature.
If the temperature of the host is too high, if you set the temperature alarm, the host will send it when the temperature reaches a certain temperature. "Woo woo woo is like the sound of an ambulance.
The viewing software can be used with this everest ultimate edition 2006 final Chinese Simplified Complete Edition.
If you have any questions, you can still contact me.
-
Next software Anyway, a lot.
-
If the temperature is high, it is best to buy some silicone heat sinks, which will be better for cooling, and it is best to install the fan. Do not loosen.
-
The i7 will not exceed 45 degrees under normal circumstances, and the standby is generally more than 20 degrees in winter. Your high temperature must be your heat dissipation problem, use Master Lu to look at the speed, and replace it if it is less than 3000.
-
Don't overload your work, it will cause your CPU to be damaged. In general, the temperature should not exceed 60 degrees, and it is easy to burn. 30 50 degrees is normal.
-
78 is definitely high, more than 50 degrees is acceptable, so apply silicone to the contact surface of your CPU and heat sink.
-
Not too high. It's normal. There's a problem with 85...
It's basically 55-75 in operation
-
I suggest that you first change a power supply that you think has no problem, and try it Before you make sure that there is no problem with your software Have you installed a garden tool to see if there is a problem with your garden tool settings Then think about whether there is a problem with the motherboard It is best to change to a power supply that has no problems first.
The computer automatically restarts for hardware, and most of the power supply is insufficient, whether it's the CPU or other circuits, so that the CPU can work properly, because the CPU is the core of the computer
CPU heating proves that it is busy at this time CPU power supply current requirements are very large, if the power supply can not give it enough current at this time, then the CPU power supply detection circuit detects an abnormality, the detection circuit will (the CPU) immediately stop it. At this time, Nanqiao did not receive the data sent by the CPU - "In the case of an emergency in the CPU, the CPU can notify the South Bridge without the North Bridge, and the CPU can directly tell the South Bridge and let the South Bridge know that I can't do it" - the South Bridge knows that there is a problem with its superiors "North Bridge or Cup" As long as the CPU stops, the current at this time is in a normal state again, the South Bridge will think that the power supply is still normal, it will reset the entire motherboard again, as long as the motherboard has the belt circuit is normal, the boot circuit is normal The power supply circuit is normal, the clock circuit, and then the reset circuit is immediately sent out from the south bridge, and then the computer will restart
-
Watching movies 60% means that your graphics card does not support hard decoding. But 60 is not yet dead. If the CPU temperature is too high, it will generally freeze, and a very small part of it is a restart.
-
1. CPU temperature is too high: low fan speed, blocked radiator, poor contact between radiator and CPU, and aging of silicone grease.
2. Poor contact between the CPU and the socket.
3. The motherboard has virtual welding.
4. The temperature of a part of the motherboard is too high: add a fan.
5. The plug contact between the power supply and the motherboard is poor.
6. The restart switch is damaged (it cannot be completely disconnected, it seems to be not connected) 7. The hard disk is in poor contact with the data cable and power cable.
8. Other board or equipment failures.
-
You're looking at occupancy!
The temperature should be checked by the software.
Around 100 degrees will crash or restart.
-
If your computer has too many startup items or no space on the C drive, there are viruses, and there are too many disk fragments, the easiest way is to reinstall the system
-
It's normal! The computer runs very quickly during your reboot, so it's normal to heat up, and it's summer! Buy a radiator.
-
Maybe the CPU cooling fan doesn't work, or there's a bit of dust in it, clean up the dust.
Also related to the hard drive, go and scan your hard drive to see how many bad sectors there are.
-
My CPU has been turned on for more than 30 degrees, and it's normal.,I guess your problem is not just a matter of CPU.,Reinstall the system and try it.,If it doesn't work, it should be a problem with the compatibility of various hardware.。
-
The CPU temperature of 52 degrees is normal, your computer reboot has nothing to do with the temperature of the CPU, it has a lot to do with your hard disk, it is recommended that you try it with a different hard drive.
-
What a serious problem ... You'll have to go to the warranty and take a look... It's a hassle to solve it yourself
-
52 degrees isn't too high. It is advisable to check the temperature (by hand) at the lower North Bridge and the South Bridge
-
Purely passing by ......I just feel like CPU 52 degrees isn't a big deal, it's not too high, it's ......
-
Considered drug detection?
Looks poisonous.
-
It's normal temperature and there's no need to worry.
Always reboot is not poisoned.
Or maybe your power supply is broken, or it's that the voltage is unstable there.
-
The CPU temperature resistance is 65 degrees, your CPU temperature is too high, and you need to check whether your CPU fan and cooler are abnormal when making sure that the computer is not poisoned.
-
Are you sure the temperature is right? The temperature of the processor should be the average temperature of 2 cores, how can the temperature of your processor be so much lower than that of 2 cores? That's obviously not right.
-
63 degrees shouldn't be high.,My classmate's computer is 90 degrees to see him still play wow.,Is it poisoned?
-
It's normal to play big games like that, especially World of Warcraft.
-
Dear users, hello:
In the process of transporting the notebook, it has a heating process, and the temperature is related to the user's usage habits and environment. and so on. Generally, it is safe to boot between 45 and 65.
In summer, due to the high indoor temperature, the computer temperature will increase. If you play a large game or a 3D game in a high-temperature environment, the temperature will rise faster, resulting in blue screens, freezes, reboots, automatic shutdowns and other failures. To be on the safe side, it is advisable to take some auxiliary measures to cool down. :
Such as:"Add ***. The fan has a large heat dissipation bottom seat (pad), pay attention to the use environment, it is best to use it in an environment with air circulation (to avoid the damage of high temperature in summer) and at the same time use the following methods such as: cleaning.
IE Cache, Calendar Browsing Traces, Memory Cleanup. Try to start as few programs as you don't need or use immediately, such as QQ
Thunder. Storm Shadows. etc., reduce the burden on the system and make it easy for the computer to go into battle; Of course, it is essential to clean it regularly to avoid excessive dust causing heat dissipation problems and affecting the normal operation of the computer; These methods maximize the protection of the computer while controlling the temperature.
If the problem is still obvious and has not changed after taking the above measures, it is recommended that the repair service station detect and solve the problem.
-
I only had my HP PV6 high temperature and heat dissipation difference.
Y450 was a discrete graphics card with excellent heat dissipation and high cost performance. It's a balance.
I can run to the graphics card 86, Master Lu is screaming in the background! Just cut it out and look at the desktop for a while :)
There won't be much gap.,Photoshop is not so demanding on the CPU.,If you're short of money, it's good to use P4 531 or A64 3000+.。
Simple instructions! Because the problem cannot be explained all at once and in place. >>>More
1. Use the Clone Stamp tool.
This is the more common method. To do this, select the Clone Stamp tool, hold down the Alt key, click on a similar color or pattern sample in the textless area, and then drag the mouse in the text area to copy to cover the text. -xxsob} 8 Note that the sample point is the starting point of replication. >>>More
2.It is recommended to draw a pencil sketch or a needle pen after drawing, so that it is easy to identify, so that there will be no reflection when scanning, if there is no scanner, it is recommended to use a camera to shoot and send it to the computer. >>>More
The main material is silicon.
It is glass of high purity. >>>More