How to color an original with Photoshop

2.It is recommended to draw a pencil sketch or a needle pen after drawing, so that it is easy to identify, so that there will be no reflection when scanning, if there is no scanner, it is recommended to use a camera to shoot and send it to the computer.

3.It's best to have a graphics tablet (pen tablet), which is the kind of computer external digital device that is hand-drawn input, and it is more freewheeling.

4.If you don't have this condition, open the file with PS--- double-click on the background layer to unlock --- magic wand tool to select each area --- fill the color. The dark part can be checked with the lasso tool and then filled with the dark color of the corresponding color to make it more three-dimensional.

It's hard to achieve great results with commands alone, giving you a simple, effective way to do it:

Execute: Image --- adjust the hue --- the Shating command inside the Saturation point. Then adjust its color, saturation, and lightness.

Tip: The coloring command can only bring up one color at a time, so make a selection before adjusting. Select different areas to adjust the different colors.

Finally, the image is beautified with several commands under the image --- adjustment (free choice, depending on personal style).

It's hard to tell! If you know PS very well... But it's up to you to put it simply! Create a new transparent layer on top of the original layer! Then use the brush to say that the color part can be filled directly! For light and dark comparisons, you can use the Dodge tool!

The subtle ones can be filled with the pen tool to draw a path and then fill it!

It's better to have one layer at a time!

The specific steps are as follows:

1. Open Photoshop and create a new blank canvas.

2. Select "Rectangle Tool" in the left toolbar, click "Fill" in the upper menu bar, and select "No Color".

3. Click "Stroke" and select any color you like (note: you can't choose "No Color").

4. Draw a rectangle in the canvas, at this time, only the stroke and not the color.

Resolution.

1. Hand-drawn outline drawing processing.

1) First, draw the outline by hand on a blank piece of paper, taking care to draw only the line and not the tone. The technique of line drawing can be diverse, it can be thick and thin lines, and it can be single line drawing, according to personal preference.

2) Scan the outline into your computer.

3) Duplicate one layer of the outline layer, fill the original layer with white, and name the duplicate layer"Contour line"。

4) Put"Contour layer"Adjust the brightness contrast (menu --- Adjust - Brightness Contrast), and finally it looks like the background color is white and the line is black.

5) Click on the white part of the outline layer with the magic wand - then right-click - select similar - select all the white, and remove all the white parts after selection, so that in the end there are only outline lines in the computer, and the other parts are transparent"Contour layer"Put on top, and always on top.

2. Save the selection.

1) Put the ** Zoom in (Zoom tool).

2) Use the Path Tool (Pen) to accurately outline each part of the character Top, Bottom, 3 Human Body, 4 Accessories, 5 Hair (can be divided into thinner as needed), and then transform the path into a selection and store it.

3) The reason for saving the selection is to facilitate multiple modifications later, and you can use the path tool to make a selection in more detail, and you can also use others"Selection tool"Such as the "Lasso Tool".

3. Color performance.

1) Create a new layer and name it"layers", and then load the selection of the human body part in this layer - feather the selection area into 3 pixels] (note that the size requirement is 200 pixels inches) - and then select the foreground color as the color of the human body.

2) In this layer, use the foreground color to fill in so that all the ** parts have color, and then use the Burn and Dodge tools to draw the ** light and dark relationship.

4. Coloring of tops.

After creating a new layer, go to Menu - Select - Load the selection area, load the selection of the top, feather 2 pixels, then fill in the color you like and use the Dodge Burn tool to draw the light and shade of the chest, and draw the light and dark of the clothing pattern.

5. Color the skirt.

Create a new skirt layer, the skirt is drawn in the same way as the top, but the selection area should be feathered a little bigger, and then fill in the color, draw light and shade, use the filter-blur-Gaussian blur, blur the skirt that draws the relationship between light and dark, and spray a little white with an airbrush at the hem to make it full of variety.

6. Finally, use the airbrush tool to draw the light of the decoration. Click on the Airbrush tool, then click on the brush properties bar above to adjust the brushes to 800 pixels in diameter, 0 in hardness, 1 in spacing, and 0 in garden. Then draw the light on the glowing part of the jewelry, then adjust the brush angle of the airbrush to draw the other direction of the light, adjust it three times, and finally draw the effect as shown in the picture.

After scanning, adjust the contrast to make the edges clear, trim out the extra lines, remove the white background, leave only the line map on the top layer, and create new layers of different layers of colors under it.

Adjust the contrast to remove noise.

Pen strokes can be selected with pen pressure.

Copy your line drawing again, click on the layer, and the color will be deepened, and you can click on it appropriately.

You don't need to be a master at this, it depends on your proficiency in using the mouse, as well as your sense of color.

Only one color can be on.

1. Use the pen tool to select the part you want to color (you have drawn it with a pencil, you can select it with a magic wand), and then change the selection.

2. Color with a brush (because there is a selection area, so the color will not exceed the selection area, and you will not go up to other areas because the mouse is not accurate), and change to different colors according to the different colors.

You think of the mouse brush as the color pen we usually use, and we can use whatever color we want.

There are places where you can use the smudge tool to make the excessively soft spots between them. You can also use the Burn Dodge tool to overdo colors of the same series.

Basically, you use the pen tool, brush, deepen dodge, and smudge these four tools, and your picture is very clear and unreal, so even Gaussian blur is avoided.

If you still understand, you can ask me again.

The tools used are the Pen Tool, the Burn Dodge Tool, and the Brush Tool.

The Pen tool outlines the outline, and the Brush tool sets the thickness color of the edge and stroke; Set the foreground color and fill the path.

Then use the Burn tool to deepen the part that needs to be deepened, and the Dodge tool to dodge the part that needs to be colored. Finally, further retouch with tools such as brushes.

It's similar to coloring black and white**, just watch more tutorials on this. Tutorials can only be done when they have time, and the resulting tutorials are difficult to compare with some classic tutorials, after all, those classic tutorials have been changed many times.

It's very detailed here, let's see if it's useful.

This doesn't need a PS master, you need a hand-drawn master.

As long as you master the chiaroscuro, everything will be easy to do.

It is not very convenient to use PS for coloring this style, so it is recommended to use sai.

But before coloring, you can use PS to pick up the line first.

To be honest, beginners can't achieve the effect of Figure 2, even if you tell you the steps. This is no longer a question of method, it must be cultivated through long-term exercise and feel.

It should be possible to judge the first sentence or, if you are afraid of not doing well, you can first take a screenshot of **, and then take a screenshot of the year, and then the original after being proficient, you can directly use the changed screenshot.

OK. Execute [File] - [Open], load the line drawing, and copy the layer [Ctrl+J] first (the bad drawing can be restored), and then you can color it immediately.

If you want to keep your line art unchanged, use one of the following two methods.

Method 1. <>

Method two. First, extract the line art, and then create a new wax chain coloring layer under the proposed line artwork for coloring.

Method for extracting line art.

1. Hold down [Ctrl+Mouse-click] layer in the Channels panel to load it into the selection.

2. [Ctrl+SHLFT+I] inverts the selection, creates a new layer and fills it with black.

If you are referring to coloring only the line art, extract the line art using the above method, then click the first icon of [Lock:] in the Layers panel (lock the transparent pixels), and then you can use the brush tool to color the line art individually.

1: Concept map: Draw countless concept drawings first (Xianqiao Bu is generally a silhouette).

2: Patchwork: Combine good concepts (concepts in your own silhouette or temporary ideas).

3: Refine the concept map: No illustration level is required. (Generally, the promotional pictures in the game are illustrative-level, and the original art generally does not need to be to this extent when working).

4: Three views + renderings (the character is the moving view) + special annotation drawings (such as equipment, **, skill actions, etc.).

5: You Xuan: Illustration-level drawing. Note that the scene and the characters must be separated from 2 layers, which is convenient for later marketing updates.

Illustrative-level general layout.

Tablet Drawing Process: (the easiest of them all).

What brush to use for the draft--- whatever brush to use, the best organic method, it is recommended to use a large brush, draw a direction.

2.What kind of brushes --- airbrushes are used for large body shapes! Feel free to use, 3Brushes with large patches of color that are evenly over-integrated --- brushes that smudge comm. Brother Sui.

4.Small body depiction--- airbrush! Feel free to use, 5Coloring --- airbrushes again! Feel free to use, 6Any brush --- a hard brush can be used for fine depiction.

In short, it is to draw a black and white body sketch first, add colors, and finally modify the effect.

Create a new layer when coloring, and adjust the blending mode to color. Painting a color on this layer does not overwrite the black and white body layer.