How to use beeswax to maintain mahogany furniture?

How to use beeswax maintenance mahogany furniture.

Method. Mahogany furniture is a very popular type of furniture in the furniture market, its material is hard, the texture is clear and beautiful, very glossy, at the same time, because the mahogany is relatively rare, so the mahogany furniture on the market is more precious, has a certain appreciation and collection value.

Requirements for use. Generally speaking, the choice of mahogany furniture maintenance beeswax for mahogany furniture maintenance is also the need to choose the region, mahogany furniture maintenance beeswax is suitable for use in the humidity of the heavier place, for the north, the weather is relatively dry, so the northerners generally use walnut oil to maintain the mahogany furniture, and in the south, affected by moisture, the use of walnut oil is easy to cause the surface of the furniture to mold and hair, so the maintenance wax has become an important choice for the southerners to maintain furniture. Below, let's take a detailed look at the steps of beeswax for mahogany furniture maintenance.

Maintenance steps. Step 1:

Here we briefly introduce the maintenance steps of mahogany furniture maintenance beeswax, first of all, what we need to do is to point wax, that is, the mahogany furniture maintenance beeswax evenly on the surface of the furniture, which is mainly to be able to evenly apply the maintenance wax to all parts of the furniture in the later wax wiping process, so that all parts can be fully maintained. The second step is to spread the wax on the top in a uniform heating process, and then scald the wax, the temperature of the wax is slightly smaller than the temperature of the cloth wax, so that the wax slowly penetrates into the material in the process of thermal movement, so that the mahogany can get better warmth.

Step 2: The following is the most critical and important step in using mahogany furniture to maintain beeswax, that is, waxing, waxing requires a special waxing tool - wax shovel (commonly known as wax driver), wax shovel is generally made of horns. For ordinary planes, you only need to smooth the head of the wax shovel, but for some hollow or other angular parts, you need to choose a wax shovel according to the actual situation.

It is worth noting that in the process of waxing, it needs to be done in one go to avoid uneven floating wax, which will affect the aesthetics of the furniture. Finally, use a cotton cloth to wipe along the texture of the furniture, and ensure the strength and speed during the wiping process, so that the wiped furniture is more shiny.

Precautions. Now we briefly introduce some matters that should be paid attention to when using mahogany furniture to maintain beeswax, the first thing to pay attention to is that the baked wax must completely penetrate into the wood to avoid unnecessary waste, and at the same time, the temperature of the heat gun also needs to be properly controlled in the whole process, so as not to damage the internal structure of the furniture, and after the end, the furniture should be carefully protected, away from fire, high temperature, water and other substances. Generally speaking, the use of mahogany furniture maintenance beeswax for mahogany furniture maintenance requires certain professional skills, and it is difficult for ordinary consumers to master, so it is recommended that you maintain it under the guidance of a professional instructor.

It mainly talks about the process of beeswax maintenance furniture.

The steps to wax mahogany furniture with natural beeswax are as follows:

1. Apply beeswax to the furniture panel.

2. Evenly wipe the cotton yarn in the waxing ** and wipe it on the panel of the furniture.

3. Hit the panel first, and then let the furniture absorb for 2-3 minutes.

4. After absorption, wipe along the texture of the furniture.

5. Wipe the panel first, wipe along the furniture panel, and be sure to wipe along the texture of the furniture, otherwise the absorption is not good, and the gloss will not rise, and the same is true for other parts.

Beeswax itself is a natural product, natural and healthy, and even has the effect of protecting hands, which can be operated with bare hands. It is safe and environmentally friendly, and does not close the original pores of the wood, so it will not affect the natural aroma of the wood.

The steps to wax mahogany furniture with natural beeswax are as follows:

Step 1: Put the beeswax in a metal container and heat it to melt into a liquid.

Step 2: Use two (or three) passes of bristle brushes to dot the beeswax on the furniture like scattered stars (one side at a time).

Step 3: Blanch the wax. Heating with an electric pantograph, the hand-held pantograph must be kept moving during heating, and use a large plate brush to evenly brush the wax back and forth to all parts, and the pantograph should move accordingly.

Be careful not to burn**, this step is the most critical. If the moisture content of the (new) furniture is high, the heating must be gradual, not too violent, so that the wax gradually penetrates into the inner layer of the wood. When the wax blisters evenly and does not continue to seep into the inner layer of the wood.

Step 4: Waxing. Use a wax driver to shovel off the remaining floating wax on the surface of the furniture until it feels non-sticky to the touch.

Step 5: Wipe the wax. Rub it repeatedly with a cotton cloth like a bath until it is shiny, and it is better to feel lubricated.

Follow the steps above for the first time and then wipe it frequently with a cotton cloth and hands. Touch. After 3 months, half a year later, the wax was scalded according to the above method.

However, the amount of wax should be reduced one time at a time. Do not leave the cotton cloth still behind, and you can use it to wipe the furniture continuously in the future.

Note: When the new furniture is scalded for the first time, the interior of the furniture does not need to be ironed with wax, so that the inner surface of the wood can freely exchange moisture with the air; If the new furniture dries better, a thin layer of wax can be ironed on the back of the core board, so that the furniture will not break in use. When the wax is scalded for the second and third time, the inside of the furniture can be thinly ironed with a layer of wax.

<> steps to maintain mahogany furniture with beeswax are as follows:

Clean the mahogany surface: Use a soft cloth to wipe down the surface of the mahogany furniture to remove dust.

Apply beeswax: Cut pure beeswax into small pieces and heat it in a pan to melt. Dip the coating in melted beeswax and spread evenly over the surface of the mahogany. Do not use too much force when rotating the strip. The thinner the beeswax layer, the better, and apply it multiple times.

Polishing the surface: After about 5-10 minutes, the beeswax solidifies slightly. Gently massage the mahogany surface with a soft cloth, then polish the surface with dust-free velvet to make the beeswax layer evenly smooth.

It should be noted that when applying beeswax, it is necessary to avoid using too much beeswax so as not to affect the aesthetics of the furniture. In addition, when scalding and waxing, pay attention to the temperature and time of the wax to avoid damage to the furniture.

The use of beeswax sensitive state furniture is as follows:

Cleaning furniture: Before maintenance, you first need to clean the surface of mahogany furniture from dust and dirt. You can use a soft cloth or sponge to pick up an appropriate amount of toothpaste or detergent and gently wipe the surface of the furniture.

Apply beeswax: Use a cotton swab or paintbrush to dip an appropriate amount of beeswax and apply it to the surface of the household ruler. Beeswax needs to be applied evenly to ensure that every part of the furniture surface is coated with beeswax.

Heat beeswax: Place the beeswax-coated furniture in a well-ventilated area and allow it to dry naturally. During the drying process, a hair dryer can be used to blow hot beeswax to make it easier to adhere to the surface of the furniture.

Polishing furniture: Once the beeswax is dry, use a soft cloth or sponge to gently polish the surface of the furniture to make it smoother and brighter.

It should be noted that when using beeswax to maintain mahogany furniture, the following points need to be noted:

Apply beeswax evenly to ensure that every part of the furniture surface is coated with beeswax.

Furniture surfaces need to be cleaned before applying beeswax to ensure that dust and dirt do not enter the pores of the furniture.

Beeswax maintenance can only keep the surface of the furniture bright for a short time, and it needs to be maintained again regularly.

When using beeswax to maintain mahogany furniture, it is necessary to prevent the beeswax bridge from touching the ** and eyes to avoid injury.

1.Cleaning: Gently wipe the surface of the furniture with a clean, soft cloth or wool brush to remove dust and dirt.

2.Apply: Put the beeswax block into a container, add an appropriate amount of vegetable oil (such as olive oil, flaxseed oil, etc.), heat it with warm water until the beeswax melts, stir evenly and apply it to the surface of the furniture after the leakage is carefully burned, and wipe it evenly with a soft cloth.

3.Polishing: After waiting for the beeswax to dry, gently polish it with a soft cloth or wool brush to make the surface of the furniture smooth and bright.

4.Maintenance: Repeat the above steps at regular intervals to maintain the shine and protection of the furniture surface.

Notes:1Avoid using beeswax to maintain furniture in a hot environment to avoid the beeswax melting.

2.Please test in an inconspicuous place before use to avoid damage to the surface of the furniture.

3.Beeswax maintenance furniture not only protects the surface of the furniture, but also increases the life of the furniture.

Clean the dust on the red wood furniture with water, and then rub it on the cloth with bee infiltration wax, and then wipe the mahogany furniture with beeswax, so that the mahogany furniture can keep it shiny.

1.Pour the beeswax into the mahogany furniture so that the beeswax is well soaked in the mahogany and evenly distributed.

2.Place the mahogany in a ventilated place to allow the beeswax to soak into the interior of the furniture and allow it to dry naturally.

3.After drying, you can use a dry towel or paper towel to wipe dust and stains off the surface of the furniture.

4.Use a soft brush to gently brush the surface of the furniture to ensure that the surface of the furniture is clean and tidy.

5.Finally, place the furniture in the refrigerator for a while to avoid over-drying or damage to the surface of the furniture.

Summary. When beeswax is applied to the surface of mahogany furniture, it can generally play a closed or semi-closed role, and will not damage the internal structure of mahogany furniture, so as to effectively extend the service life of mahogany furniture.

Can beeswax diluted with vegetable oil be used for daily maintenance of rosewood?

When beeswax is smeared on the surface of mahogany furniture, it can generally play a closed or semi-closed fighting role, and the spike will not cause damage to the internal structure of mahogany furniture, so as to effectively extend the service life of mahogany furniture.

The key question is that after diluting beeswax with vegetable oil, pro.

If it is walnut oil, it is okay to use other vegetable oils, oh pro.

Mahogany furniture can be used to flush the walnut oil of Li Men, using walnut oil itself and imitating strong oiliness to wipe mahogany furniture, which can well prevent wood from scattering and drying out late wood, and make the surface of mahogany furniture bright as new, walnut oil is natural and harmless.

Hello, according to your question, I found in the encyclopedia how to maintain and wax mahogany furniture? 1. Cleaning First of all, it needs to be cleaned before waxing mahogany furniture, if it is not the first time to wax, it should be cleaned with soapy water, and if it is the first time to wax, it is good to clean it with water. 2. Wipe dry and then wipe the table with a cotton cloth, remember to use a soft cotton cloth, so that the surface of the furniture will not be scratched and the furniture will not be scratched.

3. The wax on the wax is not a casual wax, you should choose natural wood wax, ** cheap wood wax not only can not maintain the furniture, it may also cause the discoloration of mahogany furniture and the quality is not good. 4. After washing the mahogany furniture with soapy water, wipe it with a cotton cloth, remember to dry the mahogany furniture in the shade, so that it is easier to wax. 5. Waxing skills: If you wax it, you should pay attention to waxing along the lines of mahogany furniture, so that the fit of the wax is higher and the waxing effect is better.

1. Cleaning: First of all, it is necessary to clean the spring before waxing the mahogany furniture, if it is not the first time to wax, it should be cleaned with soapy water, such as the pickpocket's liquid fruit is the first time to wax and clean it with water.

2. Wipe dry and then wipe the table with a cotton cloth, remember to use a soft cotton cloth, so that the surface of the furniture will not be scratched and the furniture will not be scratched.

3. The wax on the wax is not a casual wax, you should choose natural wood wax, ** cheap wood wax not only can not maintain the furniture, it may also cause the discoloration of mahogany furniture and the quality is not good.

4. After washing the mahogany furniture with soapy water, wipe it with a cotton cloth, remember to dry the mahogany furniture in the shade, so that it is easier to wax.

5. Waxing skills: If you wax, you should pay attention to waxing along the lines of mahogany furniture, so that the fit of the wax is more dry and high, and the effect of waxing is better.

Kiss, <>

I am glad to answer for you the method of waxing mahogany furniture maintenance: wax, this is the preparation for waxing, generally using a brush, stained with wax water, and then the appropriate amount of wax on the surface of the furniture. Spread the wax evenly during the heating process and spread it evenly over the entire surface of the furniture.

This process requires great care, there is a heating process, and the slightest slip will cause the temperature to be too high and the wood will be scorched. Blanch the wax over low heat to slowly penetrate the wax deep into the mahogany and its surface. Waxing, which is the treatment of furniture or wood carvings, depicts the carved line carving protrusions, making them more vivid, and the tools used are also specially made wax drivers.

Extended informationMahogany furniture refers to furniture made of classical mahogany such as sour branches and rosewood, and is a general term for rare hardwood high-quality furniture since the Ming and Qing dynasties. There are three major schools of traditional Chinese classical mahogany family, mainly Jingzuo, Suzuo, Guangzuo, Xianzuo and so on. Historically, Kyosaku was the "official kiln" of the imperial system and the imperial use.

Dongyang is known as the hometown of 100 craftsmen, and the wood carving skills are particularly outstanding, and occupy a pivotal position in the national mahogany furniture market. I hope mine can help you!<>