If the temperature is too high in summer, will the solid wood furniture be deformed, and what should

In the summer the temperature is too high solid wood furniture.

It is possible to deform, the change of ambient temperature will indirectly affect the humidity, in summer, the air temperature and humidity change are relatively large, and the phenomenon of cracking, deformation and even decay of furniture is possible

1. Prevent strong light exposure.

First of all, we must know the most basic thermal expansion and cold contraction.

Common sense, that is, to place solid wood furniture in the strong light exposure for a long time, too strong light will bring too high temperature, so that the water in the wood evaporates, temperature and humidity change sharply, it is easy to appear mortise and tenon.

Tighten the deformation, plates.

cracking and other problems.

Therefore, in summer, you should try to keep the furniture out of direct sunlight, and if necessary, you can use curtains or covers to cover it!

2. Pay attention to humidity.

As we said above, temperature and humidity are the basic reasons that affect wood, so in addition to paying attention to temperature, it is also necessary to have a simple control of the ambient temperature according to the summer climate in the north and south.

For example, in the northern summer, dry and hot, you can use a humidifier.

stay away), or keep a few pots of hydroponic plants to increase the humidity of the air.

And in the south, if the summer is humid, you can use a dehumidifier.

Air conditioner (don't face the air outlet), or some simple drying packs to keep the wood dry and avoid rot and mildew.

3. Clean regularly.

Regular cleaning is the most important point of maintenance, but it is best not to wipe with a cloth that is too wet when wiping, especially for old mahogany furniture, it is recommended to dust off with a feather duster to achieve the best cleaning effect.

Another advantage of regular cleaning is to find out the dirt and garbage with a certain corrosiveness in time, and clean them up in time, so as not to cause greater damage to solid wood furniture for a long time.

Fourth, pay more attention when using.

In summer, there may be more clothes and other things to be stored in some solid wood cabinets, but we still have to pay attention to a degree, so as not to cause too much deformation of the shelves, especially the top of many cabinets is relatively thin, and try to put some things on it.

When using at the same time, try not to directly heat cups, hot plates and other things to avoid burns.

The surface of the wood not only affects the aesthetics, but also affects the protective effect of the wood wax.

5. Don't wax too often.

In summer, some friends think that solid wood furniture has more wax to prevent moisture and waterproof, but in the end it is counterproductive, in fact, the wood surface is also porous, if too much wax will block it, affecting the breathability of the wood itself.

6. Don't tinker with it.

The repair of solid wood furniture is a test of craftsmanship, especially the more valuable solid wood furniture, we must find a reliable master to repair, some cracks are too deep, it is difficult to repair with glue or some other methods such as new, if it is not repaired well, it will deepen the damage when it comes to the resurgence, so this point should also be noted!

In general, the maintenance of solid wood furniture still requires us to develop daily habits! Especially in the summer when the temperature changes greatly, if you don't pay attention to it, it is easy to damage, and then it will be more distressing It is recommended that you still remember the above 6 points, don't let the furniture be damaged in vain.

At present, solid wood furniture is very popular in the market, but in the hot summer, some inferior solid wood homes are very likely to crack and deform, and those who want to buy solid wood furniture must have the ability to distinguish, or choose some big brands of solid wood furniture brands, such as Xiangfeng furniture, which has been focusing on solid wood furniture manufacturing for more than 30 years. However, it is also necessary to maintain solid wood furniture in a timely manner, and you can pay attention to the following aspects:

1) Heat and direct sunlight: The intensity of sunlight is significantly strengthened in summer, so it is best to close the curtains during the time period when the sun is directly shining on the room to avoid direct sunlight on the furniture. Solid wood furniture can cause cracking of wood due to direct sunlight for a long time, which not only affects the appearance, but also affects the service life.

2) Avoid direct air conditioning blows: In summer, the frequency of air conditioning usage skyrockets. But for solid wood furniture, it is best to avoid direct blowing of air conditioners. You can avoid this by setting the air conditioner to "anti-direct blowing" mode or installing a wind deflector.

3) Moisture resistance: It is very humid in summer and there is a lot of rain. Although Xiangfeng's solid wood furniture has undergone strict drying treatment, the long-term humidity is too high, which will easily expand, and eventually lead to the deformation of the furniture.

You can use a special wood furniture cleaner to wipe the surface of solid wood furniture, and a protective film will be formed on the surface after wiping to prevent water vapor from penetrating into the interior of solid wood furniture and maintain solid wood furniture. There's also a lot of relevant information.

What should I do if the temperature is too high in summer, and if the solid wood furniture is deformed? In general, if you don't change your mind as a home furniture, this should be a high score, and it won't have a great impact on the furniture.

Avoid strong light exposure, pay attention to environmental humidity, regular cleaning and maintenance, and do not wax frequently, these methods can prevent the deformation and cracking of solid wood furniture in summer.

Solid wood home has a sense of heaviness of the times, and high-end atmosphere on the grade, is a kind of furniture that many people like to place indoors, but after entering the summer it is prone to deformation and cracking, want to avoid this kind of problem, it is necessary to do a good job in many aspects, the most important thing is to avoid strong light exposure to solid wood furniture. Because this kind of furniture in the process of sun exposure, the moisture in the wood will be excessively evaporated, and the temperature and humidity will drop extremely, which will cause the material to shrink and deform, and it is easy to deform and crack.

1. Pay attention to the humidity of the environment

If you want to avoid the problem of deformation and cracking of solid wood furniture in summer, you should pay attention to the environmental humidity, because temperature and humidity are important factors affecting the quality of solid wood furniture, and the indoor temperature can not be too high in summer, and the indoor air can not be too humid, if the indoor air is too humid, you should use a dehumidifier to reduce the humidity as soon as possible, prevent solid wood furniture from being placed in a humid and high temperature environment for a long time, and keep solid wood furniture properly dry, so as to prevent deformation and cracking of solid wood furniture.

2. Regular cleaning and maintenance

Regular cleaning and maintenance of solid wood furniture is also an effective way to prevent deformation and cracking in summer, it is best to remove the dust on its surface with a dry rag or chicken feather blanket when cleaning and maintaining, so as to achieve a good cleaning effect, try not to use wet rags or corrosive cleaning agents to clean their surfaces, otherwise it will cause damage and corrosion to its surface, and it will also make them crack and deform in summer, which will affect the service life of solid wood furniture.

3. Don't wax frequently

Many people think that the surface of solid wood furniture can play a good protective role after waxing, can prevent it from cracking and deformation in summer, in fact, this is not the case, proper waxing can improve the gloss of furniture, and it has a certain protective effect, but frequent waxing will affect its quality, will make the original pores of the wood blocked, can not let the furniture breathe normally, then the moisture in the furniture can not be discharged in time, there will be deformation and cracking.

You can buy air conditioners at home, you can also buy some curtains that you believe are better, you can often open the windows for ventilation, you can also reduce the temperature at home, and you can also clean the solid wood furniture at home, which can prevent the cracking of solid wood furniture.

There is a way, you can spread a layer of plastic wrap on top or you can also spread a cloth cover on it, do not be exposed to sunlight for a long time, and also move to a cooler environment.

In summer, furniture should be kept out of direct sunlight as much as possible, and curtains and cloths can be used to cover it if necessary. This can prevent the deformation and cracking of solid wood furniture in summer.

On hot days, furniture should be protected from direct sunlight as much as possible, and curtains and cloths may be used to cover it if necessary. This can prevent the deformation and cracking of solid wood furniture in summer.

First, in the production process, the moisture content of solid wood is not well controlled, which may lead to cracking and deformation of furniture. After the furniture is produced, the moisture content and drying stress of the wood determine that the shape and material of the furniture will not change. Therefore, it is quite important to control the moisture content of solid wood furniture, and the balanced moisture content is quite resistant to cracking of environmental factors such as sunlight, overcooling, and overheating.

Second, abnormal weather changes may lead to cracking and deformation of solid wood furniture. Under normal circumstances, the moisture content of solid wood furniture is required to be about 1% to 2% lower than the actual average moisture content of air. However, due to the difference in geographical location, the climate and weather in China are not the same, so the moisture content requirements for solid wood furniture are also different.

For example, the average annual moisture content of Beijing is so, so the moisture content of solid wood furniture should be controlled in or. The average moisture content of the air in the south is 14%, which requires 12% to 13%. Therefore, some solid wood furniture from the south will crack after being transported to the north.

Thirdly, improper use by buyers may also lead to cracking and deformation of solid wood furniture. We also often see that some friends buy expensive solid wood furniture and place it by the window, so that the "baby" can endure the sun, wind and rain, or wipe the dust with an overly wet towel. Even moving the furniture at will, resulting in damage to the furniture frame, deformation due to uneven force in future use, etc.

Fourth, improper protection during transportation may also lead to cracking and deformation of solid wood furniture. Furniture in the transportation, it is inevitable that there will be bumps, plus the climate, the transportation of solid wood furniture is even more difficult. Although solid wood furniture will be more "strong" than furniture made of other materials, it is difficult to survive if it is not well maintained.

Solid wood furniture will inevitably have a certain degree of deformation and cracking compared with panel furniture.

In order to minimize the deformation of wooden furniture, there are several ways to do this:

Try to avoid direct sunlight to avoid oxidation of the paint surface;

When placing wooden furniture, it is necessary to avoid high temperature and dry places to prevent wood cracking and deformation;

Wooden furniture should not be placed in a very humid place, so as not to swell when the wood is wet, it is easy to rot over time, and the drawers cannot be opened;

It is not advisable to hit the surface of the furniture with heavy objects or cut things directly on the surface of the furniture to prevent damage to the surface of the wooden furniture, nor to push the furniture the ground;

Try to avoid children jumping and playing on wooden furniture to avoid damaging the wooden furniture structure;

Avoid long-distance overall handling, and lift the bottom of the furniture when small furniture needs to be moved; If you want to move large pieces of furniture, you need to ask a professional company to help. When lifting wooden furniture, it should be lifted gently, and placed flat and stable. If the ground is uneven, pad your legs to prevent damage to the wooden furniture;

Do not rinse with water or clean the wooden furniture made of plywood with a damp cloth, and the wooden furniture should not be soaked in alkaline water to prevent the plywood from being loose or degummed;

Wooden furniture should not use pigments with different colors from the first paint color of the furniture, and it is necessary to use the same color pigment and putty to mix well and then embed the cracks in the furniture to plug and flatten them, so as not to leave scars;

Do not use alkaline water to wash wooden furniture, or place corrosive liquids, high-concentration alcohol, banana water and freshly boiled water on the surface of wooden furniture to prevent damage to the paint surface of wooden furniture;

Wipe with a clean, soft cloth instead of a dry cloth. If there are stains, wipe the wooden furniture with a damp soft cloth dampened with a diluted mild detergent or use a drawing eraser. It is best to maintain it regularly once a month with special furniture wax, except for furniture with a glossy lacquer surface.

Solid wood is better than that, but if you expose your home to moisture every day, no matter how good the material is, it will not work.

There is such a saying, but since you can afford solid wood furniture, you will also have a good environment to use and maintain it, no problem. Solid wood furniture is known for its durability.

The deformation of wood is related to its material and thickness.