Who knows what to do if the toilet installation is wrong? What should I do if the toilet is always c

If the toilet installation is wrong, it is recommended to find a professional to re-install it, after all, it is necessary to ensure the safety of use of commonly used things.

If the toilet is always blocked, you can find a way to dredge it yourself, but if it doesn't work, you have to find a professional to dredge it.

The installation of water and electricity is a big deal, and it is not allowed to be sloppy, after all, once there is a problem, it will affect the safety of the room.

1. Precautions for toilet installation.

1. Check the leveling between the sewage pipe and the ground.

Before installing the toilet, the sewage pipe should be comprehensively inspected to see if there is mud, sand, waste paper and other debris in the pipeline, and at the same time check whether the ground of the toilet installation is level.

2. Determine the center of the sewage pipe.

Flip the toilet bowl over to determine the center on the toilet drain and draw a cross center line that extends to the bottom of the toilet bowl around the feet.

3. Fix the toilet.

Align the reticle line between the toilet bowl and the ground drain outlet, keep the toilet installed horizontally, and press the sealing ring tightly, and install the anchor screws and decorative caps.

4. Do a good job of bottom sealing.

5. Install the water tank accessories.

Drain the water for 3-5 minutes to rinse the pipes to ensure the cleanliness of the water pipes; Then install the angle valve and the connecting hose, then connect the hose with the installed tank fitting inlet valve and press the water source.

6. Debugging and inspection.

Check whether the water inlet and sealing of the inlet valve are normal, check whether the installation position of the drain valve is flexible, whether there is jamming and leakage, and whether there is leakage to install the filter device of the inlet valve.

Second, the toilet dredging solution.

The toilet, that is, the toilet, has become the mainstream choice for bathroom decoration in modern life. The toilet is relatively easy to install, and generally after buying it back, you can install it yourself or ask a worker to install it. Although toilet installation is simple, it is important to master the installation method of the toilet, and only the toilet with accurate installation can make people feel at ease.

What should I do if there is an installation error? Generally, there are the following general questions, let's take a look.

1. Can't get close to the wall after the toilet is installed? If the distance between the sewage pipe and the wall has been fixed and is not standardized, and there is no suitable drainage distance from the toilet, you can purchase another 1 shifter to adjust. The shifter can generally increase or decrease the maximum distance between the center by about 100mm.

2. How to maintain the straight back of the high-back toilet?

For this type of high-back toilet, the angle valve is installed on the back of the toilet and is blocked by the toilet after installation. In order to facilitate maintenance, the manufacturer generally has a maintenance hole in the lower part of the toilet bowl in consideration of these reasons during production. During maintenance, you can enter the internal switch water inlet angle valve from the maintenance hole, or open the water tank cover from the upper part of the water tank for maintenance, or move the whole set of products away for maintenance.

3. The toilet drain button cannot be bounced up or loosened after being pressed, which is related to the quality of the product, it cannot be bounced because the spring elasticity is not good, and it is loose because it is not locked. Generally, the buttons produced by regular manufacturers will not appear in such a situation within the shelf life and the specified number of uses. However, some manufacturers produce poor quality, and the number of uses and shelf life will be relatively short.

4. What should I do if the washing surface of the toilet is partially rusty and yellow? Due to the water quality, after the product is used for a long time, yellow dirt will form on the surface. At this point, you can scrub with detergent and rinse off with clean water.

5.The installation method of the horizontal drainage toilet is roughly the same as that of the lower drainage toilet, the difference is that the sewage pipe reserved in the horizontal drainage toilet is on the wall, and the height of the center of the reserved sewage pipe is 180mm and 100mm, and the sewage pipe should be exposed about 100mm on the wall when reserved.

The common problems of toilet installation are introduced here, and the toilet is more likely to be blocked, if the toilet is blocked, it is generally a hard or soft object slightly blocked, and it may also be related to the toilet installation error: it is generally divided into the bottom of the outlet and the drain is not aligned, the screw hole at the bottom of the toilet is completely sealed, resulting in the toilet drain is not smooth, and the water level of the toilet tank is not high enough to affect the flushing effect, so special attention should be paid to the toilet installation.

If the sail is clogged, you can try the following simple solutions:

Use a flush toilet unclogger: Insert the flush toilet unclogger into the toilet drain so that it fits snugly against the bottom of the toilet. Then quickly move the handle of the unclogger up and down, creating a certain amount of pressure and suction to help remove the blockage.

Use toilet special dredging agent: Pour an appropriate amount of toilet special dredging agent into the toilet bowl and use it according to the instructions. The chemicals in the unclogging agent can soften and dissolve the blockage, facilitating its smooth discharge.

Use a toilet mop: Place a plug above the toilet drain hole, then quickly press on the plug with a detachable wet mop to create pressure, and then quickly lift the mop. This continuous action of pressure and suction can help eliminate the blockage.

At present, the use of toilets could not be more common. Therefore, clogged toilets are one of the most common problems in life. It directly affects our normal living conditions and even brings great inconvenience to our families.

So, what should you do if the toilet at home is clogged? How much does it cost to repair a toilet? This is a very tricky question.

When the toilet fails, there are some small problems, and you have to learn to solve them yourself, in addition, if you can't solve them yourself, you have to ask a professional master. Want to know how much it costs to repair a toilet? Let's take a look at these questions!

How much does it cost to repair the toilet.

1. Replace the toilet seat: It is the toilet seat that is prone to failure. Due to the high frequency of use, the service life is reduced. How much does it cost to repair the toilet. Depending on the quality of your purchase, it generally ranges from tens of yuan to hundreds of yuan.

2. Treatment method of water leakage: toilet leakage is relatively common, and the biggest possibility is that the water parts are broken, and it is enough to replace the water inlet pipe. **Generally ranging from 50 to 200 yuan.

3. Treatment method of non-pumping: If there is no way to pump water, there is undoubtedly a problem with the water tank. The maintenance of ** generally ranges from 50-300 yuan. How to repair the toilet.

1. Blockage: If it is a soft object blockage, use general tools, if it is a hard object blockage, you need to dismantle the toilet to dredge.

2. Water leakage: The water tank accessories are aging or malfunctioning, and they can be replaced.

3. Installation problem: When installing, do not seal the screw hole at the bottom of the toilet.

4. Button failure: If the button fails, you can replace it directly.

5. The air temperature is not hot (otherwise normal): the drying device or computer board is faulty.

Solution: Whether there are 89+ -4 ohms at both ends of the heating wire frame, and if not, the drying device is broken. If there is 220V at both ends of the heating wire frame socket, the computer board will be broken.

What to do if the toilet is blocked at home.

How to get through a clogged toilet - the reason.

There are two reasons for blockage: 1. Blockage of soft objects, such as paper towels. 2. Hard objects are blocked, such as toothpaste and soap.

How to get through a clogged toilet - soft objects are clogged.

Flush the water several times, bring the water to a boil, pour it into the toilet, and flush the toilet again after a few minutes. Put the loaches in the toilet bowl and pour in a glass of warm water to try it.

How to get through a clogged toilet - a blocked hard object.

Hard objects are stuck in the elbow, and something that can be bent is prepared to take out the hard objects. Ask a professional to solve it.

Clogged toilets are one of the most common problems in home life. Not only does it affect the normal life of our friends, but it can also put us in an awkward position. So, what to do if the toilet is clogged?

First of all, let's analyze a few possible causes of toilet blockage:

1. The toilet installation error.

Generally, it is divided into: the outlet at the bottom is not aligned with the drain, the screw hole at the bottom of the toilet is completely sealed, which will cause the toilet drain to be unsmooth, and the water level of the toilet tank is not high enough to affect the flushing effect.

2. The toilet is slightly blocked.

Generally, the toilet bowl is clogged by toilet paper or sanitary napkins, towel rags, etc., which can be dredged directly by using a pipe dredging machine or simple dredging tools.

3. The toilet is aging and blocked.

The toilet has been used for a long time, it is inevitable that it will scale on the inner wall, and in serious cases, it will block the vent of the toilet and cause the toilet to drain slowly.

4. The toilet is blocked by hard objects.

Accidentally fall into hard objects such as plastic brushes, bottle caps, soaps, and combs when using. This kind of blockage is mild, you can directly use a pipe dredging machine or a simple dredging device to dredge directly, and when it is serious, you must disassemble the toilet to dredge, and this situation can only be completely solved by getting things out.

Let's take a look at a few solutions to a clogged toilet:

1. Go to a 2 yuan store or grocery store to buy a manual dredge (something that looks like a spring), and dredge it yourself, and a dredge is a few yuan.

2. Find a longer section of plastic water pipe, connect the tap water at one end, plug the toilet mouth into the toilet mouth at the other end, and then block the toilet mouth with rags and other things, and then turn on the tap water, which will use the water pressure to dredge the pipe.

3. Dun cloth method: use the dun cloth of your home to mop the floor. First put the cloth at the mouth of the toilet, and then put water to ensure that the water submerges the cloth.

Then press the cloth hard, stuff it into the toilet mouth as much as possible, and finally lift the cloth as fast as possible, repeat this action, the things in the toilet will be sucked out, and the pipe can be unblocked.

4. If the toilet is blocked by hard objects, it can be solved in this way. Pick up the dirt first, put the water while carrying it, so that there is only water in the toilet, and then use a towel to dry the water, find a small environment, the best is the kind of small mirror on makeup, a flashlight, put the small mirror at the bottom of the toilet, adjust the angle of the light source and the mirror to see part of the inside of the pipe, usually the small thing will be stuck in the innermost part of the pipe to turn downward, find a more suitable wire, if your luck is good, this small thing stuck in the toilet noise eye will be solved.

<>1. The toilet plug is a tool often used when the toilet is clogged, you only need to put the end of the toilet plugged with rubber at the toilet bowl down the hill to call the water outlet, and repeatedly press hard and then lift it up, for paper towels, plastic bags and other things, it is easy to rinse it with a beam.

2. After the toilet is blocked, you can also use a steel wire or hanger to disassemble it and bend it into the shape of a toilet sewer pipe, with a hook at the top, and stretch it into the toilet sewer pipe to stir back and forth to dredge the toilet.

3. You can also use baking soda and vinegar mixed solution to dredge, pour baking soda and vinegar into the toilet drain, there will be some foam and hissing sound, and then pour a small basin of hot water in it, so that the baking soda and vinegar are completely dissolved, which can effectively dredge the toilet.

4. Pour the pipe dredging agent into the toilet drain, pour about 15 grams each time, and pour it every 3 minutes. After pouring it, add hot water to it, usually wait about 10 minutes, and then you can rinse off the blockage with water, which is relatively common in the market and is easy to buy.