What to do if water leaks at the bottom of the toilet? How to deal with water seepage at the bottom

Updated on home 2024-07-03
11 answers
  1. Anonymous users2024-02-12

    When water seeps from the bottom of the toilet, you can use the pull-burst bolt fixing method to solve the problem: place the toilet in the installation position, draw the outline of the toilet base on the ground, and draw the location of the bolt holes in the mounting holes.

    Toilet removal begins by unscrewing the connecting tube between the toilet and the wall. Then use a blade to remove the white sealant from the bottom of the toilet that is in contact with the ground, and then remove the toilet.

    When installing, first clean the area around the toilet eye, and there should be no sewage. Align the eye of the toilet with the toilet hole on the floor and lay it flat, then lift the toilet left and right, apply a circle of glue to the inside of the toilet, then apply glue to the outside of the toilet and flatten, and use a circle of glue to connect the tube to the wall.

    Do not use water after 42 hours of installation. Wait until the glue is dry.

  2. Anonymous users2024-02-11

    Do you first understand how the original toilet was installed? The preparation of tools and materials is different from the way it is installed. (In the case that the toilet itself is not damaged, such as a broken porcelain body, etc.), it may be due to a leak due to an installation problem.

    There are two ways: 1. If it is installed in a specialty store, it is usually padded with a sealing ring inside, and the toilet is placed with glass glue around it; [Tools to prepare: utility knife, (if you need to disassemble and assemble the angle valve, you need to prepare) water adhesive tape, wrench, glass glue and glass glue gun.

    The special sealing ring for the toilet (if it is removed and needs to be replaced)] 2. If it is a decoration of plumber and electrical tooling, white cement is usually used; [Prepared tools: slotted screwdriver (used to eliminate the original white cement), white cement (when reloading, first mix the water at the bottom of the toilet, then put the toilet seat up and put it stable, and then use the mixed white cement to seal the toilet footsteps in a circle, and when it is dry, it can be used. Be careful not to let the white cement fall into the pipe, otherwise it will cause the pipe to be blocked. 】

  3. Anonymous users2024-02-10

    Caused by installation errors or broken flanges.

    The specific steps are as follows:

    1. The bottom edge is leaking, which may be caused by installation errors or broken flange rings, it is recommended to remove the toilet, reinstall it, or replace the flange ring.

    2. If it is caused by the poor sealing of the bottom of the toilet and the floor tiles, that is, the glass glue is opened, it is recommended to remove the old glass glue and re-enter the high-quality glass glue seal.

    3. If the bottom of the toilet is cracked and leaking, the crack is not large, it can be filled with colloid, if the crack is large, it is recommended to replace the toilet.

    4. Toilet leakage, in addition to the quality of the toilet itself, it is also possible that the quality of the water valve pipe is not good, and it is damaged, causing water leakage. In addition, if the drain valve is not tightly sealed, it will also cause the toilet to leak.

  4. Anonymous users2024-02-09

    It is easy to deal with in this layer, as long as you put a circle of silicone at the junction of the toilet and the floor tile to prevent this problem from happening again, it needs to be carried out in a dry condition. If it seeps to the next floor, it means that the concrete slab is seeping, and the toilet should be removed, the concrete surface layer should be removed, and the toilet should be installed after maintenance without leakage after maintenance.

  5. Anonymous users2024-02-08

    It is estimated that you did not carefully measure the location of the drain outlet when purchasing a toilet, so it is recommended that you apply putty and strip the outer perimeter of the drain toilet discharge outlet. Rear drain type, the drain hose is clamped with clips.

  6. Anonymous users2024-02-07

    Call a master to help you, you can't solve it alone.

  7. Anonymous users2024-02-06

    Toilet for a family, is very important, need to be used several times a day, if there is water seepage, it will affect home life, so it needs to be repaired in time, so what to do with water seepage at the bottom of the toilet, and what are the skills of daily cleaning of the toilet, do you know about it. Now let's take a look.

    1. What should I do if there is water seepage at the bottom of the toilet?

    If there is water seepage on the bottom edge of the toilet, you need to remove the edge sealant, check whether the rubber ring is damaged, whether the drain is aligned with the drain, and after repair, you need to reapply the sealant to the bottom of the toilet. If there is a foreign object in the toilet, you need to remove the toilet, remove the foreign object, and then apply the fixing glue again.

    Second, what are the skills of daily cleaning of the toilet.

    1. If the toilet is used for a long time, there will be some bacteria left on its surface, and if it is not cleaned in time, it will still cause some harm to the human body. However, when cleaning the toilet, ordinary flushing is not possible, but it is necessary to use a special detergent, and it cannot be wiped with a hard object similar to the wire ring, which is easy to damage the surface of the toilet.

    2. When people use the toilet, they will have a random action, that is, throw the used toilet paper into the toilet. If it is easy to flush paper, there is no problem, what I am afraid of is that the wet paper towel is a unique type, which cannot be washed away by water, and can also be washed away, which eventually leads to and respects its blockage in the sewer pipe, thus affecting daily use.

    3. If the toilet is blocked by some grease items, you can use soda or vinegar to flush the official road, and it is easy to flush it open. If you can't flush the toilet, you'll need to contact a professional plumbing staff to deal with it. In addition, you should pay attention to not forgetting to dump garbage and paper scraps in the toilet bowl to avoid clogging again.

    What to do about the leakage at the bottom of the toilet, and what are the skills for daily cleaning of the toilet, I will introduce it here, do you understand it? Water leakage at the bottom of the toilet bowl will inevitably affect daily use, so it is necessary to find the problem as soon as possible and then fix it.

  8. Anonymous users2024-02-05

    1. Find out the cause of the toilet leakage. The right medicine". Check if there is a leak in the toilet flush, a leak caused by a blockage under the toilet, a permanent loosening of the toilet, a gap in the toilet that is not properly installed, or an uneven floor, etc.

    2. If the bright finger is leaking on the edge of the toilet, then scrape the glue on the edge first, tilt the toilet at a certain angle, see if the rubber ring of the toilet connection test is damaged, replace it if it is damaged, and then let the toilet drain face the lower pipe, and then use new glue to apply it to the edge of the toilet bowl in contact with the bottom edge.

    3. If the bottom of the toilet is a cement board, you need to open the cement board first, then get the cement inside out first, and then re-smear the black cement inside. Then the outermost layer is plastered with white cement.

    4. If the toilet is blocked because there is a foreign object in the toilet, you must disassemble the toilet first, and then glue and fix it. Similarly, the leakage caused by the loose toilet due to the long use of the potato bowl also needs to be replaced with spare parts and glue.

    5. The toilet is repaired, do not use it in a short time, and do not flush it. The use time is long and the water leaks, so you need to replace the toilet sealant.

  9. Anonymous users2024-02-04

    Enter the area and get the decoration for free**].

    After the toilet is used for a long time, there will be various problems, such as water seepage at the bottom of the toilet of some owners' homes. Toilet leakage is easy to breed bacteria, etc., so we need to deal with and repair it in time, so how to deal with water seepage at the bottom of the toilet? Next, I will briefly introduce it to you.

    1. The reason for the water seepage at the bottom of the Ma Zhaoye barrel may be because the toilet itself is not of good quality, and there are cracks at the bottom of the toilet, and the water flows out along the cracks when we use it. If there is a crack in the flushing toilet, it should be replaced with a new toilet in time, and everyone should choose the best product when buying a toilet. If it is too late to replace, you can use ceramic glue to temporarily repair it.

    2. The water seepage at the bottom of the toilet may be due to the use of too little glass glue when the edge of the toilet is burned, resulting in a gap between the toilet bowl and the ground; Or because the sealing ring at the bottom of the toilet bowl is not tight or the family is broken, resulting in the corrosion of the toilet glass glue; It may also be because the toilet drain is not aligned with the ground drain and so on. 3. In the face of these situations, we can first scrape off the glass glue on the edge of the toilet, and then tilt the toilet at a certain angle to check whether the toilet seal is damaged or not installed, if so, install a new sealing ring, and put the toilet drain against the sewer; Finally, the toilet bowl is edged with glass glue. 4. The toilet has been used for a long time, and there may be aging of toilet parts, such as the problem of the float of the water tank, which causes the toilet to be flooded all the time, and the amount of water will leak from the bottom of the toilet.

    In this case, we just need to talk more about the aging parts. After the toilet bowl is repaired, try not to use it for 24 hours, and wait until the toilet sealant is solidified. Summary:

    As for how to deal with water seepage at the bottom of the toilet, I will briefly introduce it to you here. I hope that after reading this article, you will be able to understand this. If the bottom of the toilet is leaking, we can also ask a professional maintenance personnel to repair it.

    Do the math how much it will cost you to renovate your home

  10. Anonymous users2024-02-03

    Most of the cases are caused by the aging of the internal parts of the toilet tank, at this time it is necessary to replace the parts, if there is a leak in the connection between the toilet and the sewer pipe, the toilet needs to be re-installed and re-sealed.

    32% of toilets have dysentery bacilli on them, one of which is called"Song Nei"The dysentery bacilli survive on the toilet seat for up to 17 days; Another experiment also pointed out that when 100 million polioviruses were thrown into the toilet, 3,000 viruses were splashed on the seat. At the same time, many people like to put a flannel gasket on the toilet bowl in winter, which is easier to adsorb, retain and excrete pollutants, and is more likely to spread diseases.

  11. Anonymous users2024-02-02

    When we find that there is water seepage at the bottom of the toilet bowl, we should first deal with it in time to avoid causing more serious problems. Here are a few ways to deal with water seepage at the bottom of the toilet bowl:

    1.Replace the gasket: The main cause of water leakage at the bottom of the toilet bowl in the toilet is a leak caused by the cracked or aging gasket. At this time, it is necessary to replace the gasket, and pay attention to choosing the appropriate model and quality.

    2.Tighten the screws: Sometimes the bottom gasket will come loose, so you need to tighten the screws so that the gasket fits snugly against the bottom of the toilet.

    3.Reset the pipe: If the bottom gasket has been replaced, but water seepage persists, then the mask may be a pipe shift or a poor seal. At this point, the pipe needs to be reset, making sure that all connection points are tight and in the correct place.

    5.Seek professional help: If none of the above methods work, then there may be a deeper problem that requires professional help. Do not disassemble the toilet yourself to avoid greater damage.

    In short, for the problem of water seepage at the bottom of the toilet bowl, it is necessary to deal with it in time, choose the appropriate treatment method, and ensure that it is repaired properly to avoid causing more trouble. If you are unsure of what to do, it is advisable to seek professional help from the Finch.

Related questions
9 answers2024-07-03

When water seeps from the bottom of the toilet, you can use the pull-burst bolt fixing method to solve the problem: place the toilet in the installation position, draw the outline of the toilet base on the ground, and draw the location of the bolt holes in the mounting holes. >>>More

5 answers2024-07-03

Hello, happy to answer your questions. There are many ways to deal with this. If it's just a small area of water seepage, you can buy some glue. This glass glue, gluing these is particularly good. The effect is very noticeable. >>>More

12 answers2024-07-03

Toilet. It's in every one of our homes. But how to solve the toilet leakage? >>>More

4 answers2024-07-03

Caused by installation errors or broken flanges. >>>More

12 answers2024-07-03

It's all dug up, if it's really a leak in the water pipe, you should be able to see wet stains, generally the wettest there is near the water point! You can find a person who specializes in repairing water pipes or a property to assist with the repair, and you know that the joints are there, not just dig there! The leakage of the water pipe has nothing to do with whether the wall is waterproofed or not, that is, if it is waterproofed, the leaking water of the water pipe in the wall will also seep out, so it is practical not to install a hidden pipe! >>>More