How to get the garbage out of the keyboard

If it's a desktop, you remove the keyboard, turn it over, pat it with your hand, it's OK, it won't break, and the notebook can be made with a special brush.

The mechanical keyboard cleanup method is as follows:

1. Because the keyboard has food residues, soot falling, sweat stains and other stains during use, the keyboard should be cleaned regularly during use. We can use the key puller to remove the keycaps of the mechanical keyboard one by one, or we can use our hands to pull them off one by one, although it is laborious to do so. But don't forget to take a photo with your phone before dismantling it, otherwise it will be embarrassing to forget the location and how to install it later.

2. Put the removed keycaps into the basin, add an appropriate amount of detergent, remember not to add corrosive liquids, and then clean them directly by hand, clean them with water several times, and then put them in a ventilated place to dry, to avoid sun exposure, so as not to deform.

3. While washing the keycaps, use a small brush to sweep away the dust of the keyboard, or use a blow dryer to blow it, remember to use cold air when blowing, or wipe it with a towel that is slightly moist but can't squeeze out the water.

4. After the keycaps are dried, reinstall them by memory or against **, so that the mechanical keyboard will look brand new. The most important thing is to feel comfortable in my heart!

Extended Information: A mechanical keyboard is a type of keyboard. In terms of structure, each key of the mechanical keyboard is composed of an independent micro switch, and the key has a strong sense of passage, so it will produce a special feel suitable for game entertainment, so it is usually used as a relatively expensive high-end game peripheral. According to the classification of micro switches, there are four common types of brown switches, blue switches, black shafts and red shafts, and rare or discontinued shafts such as white shafts, gray shafts and green shafts.

The keycaps of the mechanical keyboard can be removed, and the junk can be wiped with a cleaner after the keycaps are removed.

Mechanical keyboards are now basically the standard configuration of gamers, and mechanical keyboards have a long lifespan, but when time is permanent, the keyboard will accumulate a lot of dust. How dirty is your mechanical keyboard? Let's clean up the dust together

Paperclip, make an L-shape, and then on the short end, help with double-sided tape, and then stuff it into the gap of the keyboard, write it back and forth, and then change the double-sided tape, change it a few times, the keyboard is basically cleaned, cut out the keys, and then use a brush to brush the keys inside the keyboard can be washed with water.

Is it the inside or the gap, if it's a gap, use a brush, which is a brush with glue.

I was also bothered by this problem, so I turned the keyboard over and gently tapped the keys ......There will be small debris falling out. If it's too much, it's recommended to buy a new keyboard It's still relatively cheap. (*Hee-hee.)

Use the set that cleans your computer, which has a small brush in it, which should be clear.

The easiest thing is to take it apart and clean it up, and it's very simple.

There are two types of computer keyboards: ordinary membrane keyboards and mechanical keyboards, and the cleaning methods are different.

Ordinary membrane keyboard (cheaper, generally between dozens and hundreds):

1. Turn over the keyboard, back up, and pat to clean up the clutter;

2. Stubborn stains and mud stains, gently scrape off with a razor blade;

3. Use a hair dryer to clean up surface dust and small debris;

4. Use a clean, damp cloth to scrub the oil clean.

Mechanical keyboard (**higher, generally 300 to 1,000 yuan):

1. Use the key puller to pull out the keycaps;

2. Use a brush to clean up the dust in the keyboard;

3. Put the keycaps in clean water, pour an appropriate amount of detergent, and gently scrub off the dust;

4. The keycaps are placed on the plane sideways and dried naturally;

5. Plug back into each axis of the mechanical keyboard in turn.

The landlord tries 360 Security Guard to clean up the system garbage.

There are two types of keyboard cleaning: one is surface cleaning, that is, cleaning the residue and dust in the gap between the keycaps; the other is a comprehensive cleaning, in addition to the first type of cleaning parts, the keyboard will also be disassembled to clean the inside;

Surface Cleaning Steps:

1. Clean the keycaps: turn off the power, spray the cleaning liquid, and scrub the keycaps with a towel;

2. Clean the upper cover (keyboard): After cleaning the keycaps, pull off the keycaps one by one with a key puller, turn the keyboard upside down (that is, the keyboard is facing down), slightly pat the keyboard to let the dirt fall, and then clean and dry the upper cover panel with a rag, and restore the keycaps;

Full Cleaning Procedure:

1. Clean the surface first;

2. Tear off the keyboard pad, disassemble the screws, and open the keyboard;

3. Pour out the silicone pad in the keyboard, put it in the basin and clean it with disinfectant (if it is a mechanical keyboard, you can directly scrub the circuit board);

4. Scrub the dust and stolen objects in the keyboard bottom cover without disassembling the conductive film;

5. Replace the silicone pad and install the keyboard (the silicone pad must be placed, otherwise the keyboard keys will fail);

For non-professionals, it is not recommended to clean the keyboard thoroughly, if you have a special interest, you can take some bad, old, or unready keyboards to disassemble and wash.

First of all, you must prepare the following things: a small screwdriver or a small iron rod or something like a flat mouth, a basin of water with a little washing powder, and one or two dry towels.

Step 1: Write down the keys on the keyboard to avoid making mistakes when you re-connect the keys after cleaning.

Step 2, use a small screwdriver or a small iron rod to pry out each key, pay attention to the force, do not use too much force, and be careful of the small spring under the enter key and some longer keys.

Step 3: Pour all the keys into the prepared laundry detergent water and soak for about 30 minutes (if you want to quickly or still have dirt that has not been removed, you can use a towel or something else that can be wiped one by one). Then dry with a dry towel.

Step 4: Use a wet towel (after wringing out the water) to wipe the dirt inside the keyboard, and be careful not to let the water from the wet towel flow into the key holes, so as not to cause the wiring in the keyboard to malfunction.

Step 5: Press the dried keys into the keyboard key holes one by one, and pay attention to the inversion.

If you don't like the trouble of pulling out the keyboard

Just buy a small brush.

Clean up the spot frequently.

Although it is worse than pulling the key to clean up.

But it's a good way to be lazy