How to disassemble and clean the keyboard, how to disassemble the keyboard

Updated on number 2024-08-15
7 answers
  1. Anonymous users2024-02-16

    First of all, disassemble the keyboard cap, clean the keyboard cap, the cleaning method is similar to our usual washing steps, put all the keyboard caps into the basin, wash them thoroughly with water with laundry detergent or other cleaning liquid.

    The inside of the keyboard is more cumbersome, so we use a small vacuum cleaner to vacuum it first. Then use a brush to remove the remaining dirt inside, thoroughly sweep away the dust and other impurities, and then wipe it vigorously with a wrung out wet towel several times.

    In order to prevent residual moisture and to ensure that the keyboard can continue to work after cleaning, place the keyboard cap and the keyboard in a ventilated place to dry.

    A keyboard is a command and data input device used to operate a computer device, and also refers to a set of function keys (such as typewriters, computer keyboards) that are arranged to operate a machine or equipment by the system. The keyboard is also part of the musical instruments that make up the keyboard, and it can also refer to the instrument that uses the keyboard, such as the piano, digital piano, or electronic keyboard, etc., and the keyboard helps to practice typing.

    The keyboard is the most commonly used and most important input device, through which English letters, numbers, punctuation marks, etc. can be input into the computer, so as to issue commands and input data to the computer. There are also keyboards with various shortcut keys. Over time, there have been separate products on the market with various shortcut functions**, with dedicated driver and configuration software, which can also be used individually on compatible machines.

  2. Anonymous users2024-02-15

    The keys are all buttoned down and washed, and my keyboard has done this many times.

  3. Anonymous users2024-02-14

    The steps to remove <> keyboard are as follows:

    1. From the back of the keyboard, remove the cover, and you can see the main control circuit of the mechanical keyboard.

    2. You can choose to go directly to the front to remove the steel plate or carefully remove the main control circuit.

    3. Turn to the front, the place marked with the five green circles is the screw position, note that the rightmost screw is not consistent with the size of the remaining four.

    4. Remove the keycaps, so that you don't have to worry about getting rid of the keycaps during the disassembly process, and the keycaps are easy to keep when you remove them.

    5. The steel plate has been disassembled.

  4. Anonymous users2024-02-13

    The steps to disassemble the keyboard are as follows;

    1. Turn the keyboard upside down, with the side of the keys facing down, pay attention to the whole process of disassembling the keyboard, and the keyboard cannot be reversed.

    2. Remove all the screws, remove all the wheel screws and still can't remove the back cover, then it is likely that there is still one that has not been removed.

    3. After disassembling all the screws, you can easily remove the back cover, take away the back cover a little lighter, after taking off the back cover, you will see a three-layer plastic film, this is the keyboard film, there is a circuit board in the upper left corner, there are many metal pieces on it, when the keyboard is faulty, take it apart, wipe the metal sheet and then install it back.

    4. The next layer is the rubber cap, which is used to trigger the keys and reset the keys, all of which are placed on the grooves on the back of the keycaps, and they can be easily taken off.

  5. Anonymous users2024-02-12

    1. Remove the keyboard cap: Use a screwdriver to gently warp the side of the keyboard cap, and the keyboard cap will easily fall off for slipping. Due to the large number of keys, removing the keyboard cap is a big project, but you need to be patient.

    2. Clean the keyboard caps: The cleaning method is similar to our usual laundry, put all the keyboard caps into the bucket, use laundry detergent or other detergents, and wash them thoroughly with water.

    3. Clean the inside of the keyboard: The inside of the keyboard is relatively cumbersome, use a brush to remove the dirt inside, sweep the dust and other miscellaneous things thoroughly, and then wipe it several times with a wrung out wet towel.

    4. In order to prevent residual moisture and ensure that the keyboard can continue to work after cleaning, it is important to place the keyboard cap and keyboard in a ventilated place to dry.

    5. Finally, the restoration of the keyboard, the dried keyboard caps are installed one by one according to the original position, this step mainly tests everyone's familiarity with the keys. The cleaned keyboard has been given a "new lease of life" and a new look that people can't put down.

  6. Anonymous users2024-02-11

    1. Pay attention to the direction of the key, carefully the "head" with a small screwdriver, it is recommended to start from the bottom row of the space, and be sure to pay attention to the force and direction.

    2. Disassemble the panel from the back of the keyboard after disassembling the keys.

    3. Carefully remove the keys and circuit boards.

    4. Okay, use Mr. Vermeer to clean up the dirt on the keyboard, and brush the keyboard case vigorously with a brush.

    5. Then dry the keyboard case and keys after cleaning, and finally install the keys and circuit paper back into the keyboard case with a few holes.

    6. Press some keyboard buckles into the corresponding positions.

    7. There is also a circuit board that is installed in the appropriate direction.

    8. This kind of circuit board will have directional buckles and spirals.

    9. At this time, we can not be in a hurry to install the keyboard screws, but insert it into the computer first to test whether the keyboard can be lit and whether the keys can be used normally. Note: The PS 2 keyboard should not be hot-swapped with electricity.

    10. Tighten the keyboard screws when the keyboard can be used normally.

    11. There are still keys that need to be installed back. I forgot the key position and installed it on the Internet.

  7. Anonymous users2024-02-10

    Disassemble the keyboard step and laugh as follows;

    1. Turn the keyboard upside down, with the side of the keys facing down, pay attention to the whole process of disassembling the keyboard, and the keyboard cannot be reversed.

    2. Remove all the screws, remove all the screws and still can't remove the back cover, then it is likely that there is still one that has not been removed.

    3. After disassembling all the screws, you can easily remove the back cover, take away the back cover a little lighter, after taking off the back cover, you will see a three-layer plastic film, this is the keyboard film, there is a circuit board in the upper left corner, there are many metal pieces on it, when the keyboard is faulty, disassemble it, wipe the metal sheet and then install it back.

    4. The next layer is the rubber cap, which is used to trigger the button and reset the button, all of which are placed on the groove on the back of the keycap and can be easily removed.

Related questions
13 answers2024-08-15

Unplug it and wipe it with a rag.

2 answers2024-08-15

I'll give it to you todayAmwayThe method steps of cleaning the mechanical keyboard, first of all, under normal circumstances, if the keyboard is used every day, the cleaning cycle is best as: clean the keyboard gap once a month; Clean the keycaps every three months. The way to clean up your keyboard is relatively simple: >>>More

8 answers2024-08-15

Buckle the keys of the keyboard, take a brush or something after the power is off, sweep it down, then take a paper to wipe it, and then put the keys back in.

7 answers2024-08-15

What should I do if the keyboard key is locked.