Proe learning method, how to be proficient in proe

In my opinion, pro e self-study is not too desirable, it is recommended to go to a professional training institution to learn, if you must learn by yourself, then buy some books to learn by yourself, it is recommended to buy Lin Qing'an's parts design basics and advanced chapters, a total of 4 books plus a part assembly and product design, many training institutions are using this set of tutorials, or Tiger Studio's Pro E mechanical drawing, these books are from the basics to learn, slowly into the difficulty, and these books have teaching CDs

It is recommended to understand the basic operation and display and view settings of Pro E, then learn to draw sketches and datum planes, datum axes, and then build solid features (starting with basic extrusion rotation) and then from simple surfaces to advanced surfaces

If you want to develop in product design, the component design in Pro E must be passed, if you want to be a product designer, if you don't know component design, you will laugh off people's big teeth, I am a mold designer, I haven't put much effort into component design, and I don't have much experience to talk to you about Khan

Buy this introductory tutorial first.,Once you've started, you can go to the forum to learn.

It is better to find an engineer with many years of practical experience in the factory to tutor, no matter how good self-study is, some empirical things can never be learned, such as product structure design precautions, assembly structure, gap fit, top-down design, mold structure, drawing specifications and standards, etc., there is no way to do it, because after all, you have not experienced these, but these are the fatal key knowledge, I have only been doing structure for eight years, and I am constantly learning.

Not long ago, others, too, you can refer to it.

Address message you've got hehe.

It is recommended to find a proe model document first, pull the steps to the beginning, and then see step by step which step is used by others to build what commands. When you encounter an order that you don't understand, go check and ask.

Then build it yourself. It's kind of a door.

The modeling of PROE is basically a line-surface-volume process.

With CAD as a foundation, line-sketching is basically no problem.

If you've studied rhino, you shouldn't have any problems.

The body is an entity, and it is easy to understand after operation.

3DMAX has basically no relevance to the learning of PROE, at most cultivating a sense of space, which can be basically ignored.

1. Understand the properties of the software. Proe is not as easy to understand as Office software. It needs to be understood, the meaning of symbols, the concept of reference, materialization, etc., these names are all unfamiliar, and I will dedicate a series to explain the properties of proe.

2. Learn to define, proe Each command is composed of a model tree. Each model tree can be defined to see the corresponding data.

3. Learn to see**. Proe doesn't actually need to read books to learn, because reading books is too monotonous. ** Just look at the basics, and you don't have to read all the basic search commands, and you can learn a few examples when you see half of them.

Find a few more models on the Internet and draw them yourself. The basic tutorial design notes are shared, and there are also model examples.

4. Learn to summarize. To learn proe, you must learn to think, and how do you understand proe's materialized commands. Sometimes it's a stretch cut command, and the key to materialization is to understand the closure, to understand the boundary.

Of course, you have to practice more, just listening to the class and not practicing some operations is not the feeling when you listen to it at all, looking for a tutor to operate like that, you may not be able to do the same, more practice is the last word.

The most prominent thing about proe is sketching, learn sketching first, and proe will almost be able to get started. Proe's emphasis is on sketch modeling.

Learn proe well, this person depends on how the individual learns, it is good to have perseverance, to learn systematically, you can go to a skill learning network to learn to see, where the knowledge is full.

Do you have a two-dimensional diagram in your hand, it is a little difficult to find a set and the amount is not very large, and it is estimated that it will be almost the same after drawing it from beginning to end and then turning it into two-dimensional.

Drawing, modeling, drawing, parametric, these three processes, it only takes three months to understand, and it takes about three years to master.

If you want to get familiar with it, draw it with your hands; I want to be proficient in it and draw with my head.

proe has a lot of modules, and it is very difficult to master it.

proe is just a tool, and it doesn't make much sense to be proficient in it.

The right way to do this is:

1) Lay a solid foundation in the field you want to be proficient in; Preliminary learning of PROE, understanding its basic functions and functions, and being able to draw 2D and 3D simply;

2) Analyze the relationship between PROE and the field, and analyze how to use PROE to better assist your field;

3) A combination of both. For specific problems, use PROE to better assist and solve it, and familiarize yourself with the modules that PROE needs to use.

4) When encountering new problems, re-analyze, think, and familiarize yourself with the new features of PROE;

5) This is repeated over and over again, and eventually a generation of grandmasters ......

2. Don't be too anxious, the basic things haven't been figured out yet, and don't be busy learning advanced applications. If you don't learn the basic commands well, you will definitely not be able to use the advanced commands, and the advanced applications are slowly extended from the basics.

3. Do more exercises. You can look at the things around you and think about drawing them yourself, such as tables, stools, cups, etc., or you can follow the tutorials in the book to learn to draw a more complex product.

4. You insist on three days of fishing and two days of drying nets It is not good to learn anything.

You can go to the learning network system, where there is open learning in the forum, there is also training learning, and the lecturer is the proe structural design engineer of the company.

Three factors are important:

1. Interest. I just taught myself because whether I liked this thing or not, I felt a sense of accomplishment every time I finished a drawing!

2. Practical exercises. It doesn't mean to follow the examples in the tutorial, but to practice in the actual work, so that you can exercise your autonomy.

3. Master guidance. It is best to have a master practical guidance at work, or you have a backstage, and you can solve problems at any time. Or go to the Internet to ask for help, now that the Internet is developed, it is also a good way to find answers online!