Pulse ignition gas stove can t catch fire cause and treatment method?

Updated on home 2024-08-14
10 answers
  1. Anonymous users2024-02-16

    If the gas stove does not open the gas valve, open the valve to deal with it; If the fire extinguishing hole is blocked, clean the fire extinguishing hole; The nozzle of the gas stove is blocked, clean the nozzle; If the hose is folded, tidy up the gas pipe; If the ignition needle does not click, replace the battery. The specific reasons and solutions are as follows:

    1. Reason: The gas stove does not open the gas valve.

    Solution: Sometimes this situation will also be encountered, generally encountered in this situation of the elderly forgot to open the gas valve, want to open the gas stove but can not catch fire, this solution is very simple, as long as the gas is turned on, that is, open the gas valve to naturally turn on the gas can be ignited normally.

  2. Anonymous users2024-02-15

    Check whether it's out of gas first, it's gone, add it and try again. If it doesn't work, check if the battery is out of charge and replace it with a new No. 1 battery. If it still doesn't work, it may be that the lighter needle is covered with oil, wipe it with a cotton swab dipped in alcohol and correct the position.

    Then adjust the damper of the valve body, and check whether it can ignite normally while flipping it.

  3. Anonymous users2024-02-14

    There are many reasons: 1. It may be that the battery of the lighter is dead. 2. There may be a problem with the pulse itself. 3. It may be that the ignition needle is damaged or the position is offset. 4. It may be that the circuit contact of the gas stove is poor.

    Suggested workaround:

    1. The ignition of the pulse gas stove requires electricity, and it only needs to be twisted to a certain position to ignite the fire when it is generally used. If you find that the ignition does not catch fire and there is no clattering sound, it is recommended to replace the battery of the gas stove. In general, ordinary No. 1 batteries are used, and it is recommended to prepare a few spare batteries at home.

    2. The pulse oscillator will not be able to ignite after being damaged, so it is recommended that it is best to contact the after-sales master directly to take a look at it to see whether it should be replaced or repaired, and deal with it in time.

    3. If the ignition needle is broken or the position is offset, the pulse gas stove cannot be ignited, here you can manually check whether the ignition needle is connected, if it still can't solve the problem, you can contact the repair shop or brand after-sales service to replace the ignition needle.

    4. Poor circuit contact is a problem that we usually ignore, here we need to check whether the positive and negative poles of the battery box are rusty, and whether the circuit has poor contact. If the circuit of the stove is not in good contact, the rust needs to be removed and the wiring should be connected accurately.

  4. Anonymous users2024-02-13

    The reason may be that the ignition is broken. If the ignition of the gas stove is broken, the liquefied natural gas can not be completely burned in use, and there may be an open leakage in this situation, which is not only easy to be poisoned, but also prone to occur.

    Pulse gas stove overvoltage protection: Many gas stoves have overvoltage protection function, and once overvoltage, it will not start. Solution: If the gas stove is overpressure protected, then you need to change a pressure reducing valve to try.

    Pipe blockage: This is a very common problem, once the pipe is blocked, then it is necessary to check the gas outlet valve, generally speaking, you can smell the gas smell and the gas stove is not on fire, it is likely to be gas blockage. Solution: If the gas stove pipe is blocked, then the pipe should be unblocked or replaced.

    Micro switch damage: At this time, there is a small place in the gas stove, but it is more difficult to repair than the usual fault, generally speaking, it is not recommended that the owner repair it himself. Workaround:

    The micro switch of the gas stove is damaged, this is a delicate and professional job, or ask a specialist to solve it.

    Ignition needle dirty: The kitchen is a place that is easy to get dirty, especially easy to be stained with oil, etc., and the gas stove is left for too long, and the ignition needle is easy to be soiled by oil. Solution: At this time, you need to clean the grease of the ignition needle and then try to ignite.

    The gas stove has a high-voltage line and its connector: the gas stove has a high-voltage line and its joint, once the high-voltage line is aged, it is easy to make a gas stove and not catch fire. Solution: At this time, only a set of high-voltage protection is required, which should be observed more in ordinary life.

  5. Anonymous users2024-02-12

    The main reasons are: 1. The gas has run out. 2. The battery under the gas stove has no power or insufficient power, and this problem of not igniting will also occur.

    3. It may also be because the lighter needle is covered with a lot of oil or dirt, which has been blocked. Suggested treatment: If the gas has been used up for a long time, resulting in this problem of not ignition, you only need to go to the gas company in time to add gas, and then you can try to ignite, and it should be recovered.

    Now there is a battery compartment box under the use of natural gas, you can check whether the two No. 1 batteries inside are in a charged state, if you find that the battery power is gone, you can buy two No. 1 batteries and install them directly, and then start to try to lighten. First check whether the sound is soft and weak when ignition, if this is the case, it should be caused by the blockage on the lighter needle, first of all, you need to clean off the dirty things covered by the lighter needle, and then wipe it with a towel, and then try to light, if the above problems have been eliminated, or this situation occurs, it may be due to the internal wiring problem, the need for professional maintenance personnel to check.

  6. Anonymous users2024-02-11

    There can be many reasons why a pulse gas stove does not ignite. Here are a few possible causes:

    1.Spark plug damage: When a gas stove is ignited, the spark plug will generate a spark through a high-voltage electric shock, igniting the gas. If the spark plug is damaged or loose, it will not be able to produce a spark and the gas stove will not ignite.

    2.Ignition failure: The igniter is the core component of the ignition of the gas stove, if the ignition fails, it cannot generate the ignition signal, resulting in the gas stove not ignition.

    3.Clogged gas pipes: When a gas pipeline is blocked, the gas cannot fully flow into the gas stove, resulting in an ignition that does not produce enough gas and oxygen to mix, and thus cannot ignite.

    4.Gas opening and resistance failure: If the gas switch fails, it is impossible to control the gas flow of the gas monitor, resulting in the gas stove not ignition.

    5.Thermistor failure: A thermistor is a temperature sensor for a gas stove that is used to control the gas control valve. When the thermistor is damaged, the gas control valve does not work properly, causing the gas stove to not ignite.

    In conclusion, there can be many reasons why a pulse gas stove does not ignite, and it is necessary to carefully check and rule out each possible fault. If you can't solve the problem by yourself, it is recommended to find a professional to deal with it. At the same time, it is necessary to pay attention to safety when using gas stoves to avoid danger.

  7. Anonymous users2024-02-10

    1. The pulse ignition device of the bipolar and double-open pulses is used, and one of the pulse high-frequency oscillators is broken so it cannot ignite the fire. The solution is to go to a repair shop or brand after-sales service to replace a He Tremor pulse.

    2. The ignition needle is broken or deviated. The solution is to replace the ignition pin.

    3. It is also possible that the gas pipeline on the other side is blocked, resulting in the failure to steam normally. The solution is to replace the copper pipe.

  8. Anonymous users2024-02-09

    There are the following reasons why the gas stove does not catch fire:

    1. The battery is out of power or the power is insufficient, resulting in the inability to ignite.

    2. Poor battery contact.

    3. The high-voltage line is damaged, and the electricity leaks during ignition, resulting in weak sparks that cannot be ignited.

    4. If the burning head is not cleaned for a long time, it will lead to blockage, and the ignition will not be gasped.

    5. The opening of the mixing valve is too large, the air enters too much, and the gas is thin.

    6. There is a flame sensor near the burning head, if it is not inducted, it will not supply gas, which is air leakage protection.

    7. The circuit is not good, and the ignition is insufficient.

  9. Anonymous users2024-02-08

    In the case that the gas stove has a signal but cannot ignite when the electric pulse is blind, there may be the following reasons:

    1.Gas source issues: Check that the gas pipeline is connected correctly and unobstructed, and make sure there is enough gas near the gas stove**.

    2.Ignition needle problem: Check if the ignition needle is in good condition and in the correct position. The ignition needle needs to be aligned with the fire hole of the fire cover, and the surface needs to be kept clean.

    3.Flame splitter problem: The flame splitter is an important component of the gas stove and is used to distribute gas to the various fire holes. If the flame splitter is clogged or damaged, it may result in a non-ignition. Check whether the firearm is unblocked, and if it is blocked, please clean or replace it.

    4.Ignition coil problem: The ignition coil is responsible for converting low-voltage electricity into high-voltage electricity to trigger ignition. If the ignition coil is damaged or deteriorated, it may result in the inability to generate high voltage. Check that the ignition coil is in good condition and replace it if there is a problem.

    5.Controller problem: The controller of the gas stove is responsible for controlling the ignition, flameout and other functions. If the controller is damaged or deteriorated, it may cause it to fail to ignite. Please check whether the controller is in good condition, and replace it if there is a problem.

    6.Power supply problem: Check whether the power supply of the gas stove is normal, such as whether the battery is sufficient. If there is a problem, replace the battery.

    7.Damper problem: The damper of the gas stove is responsible for regulating the air intake. If the damper is not adjusted properly, it may result in the gas not being able to burn sufficiently. Please check the damper and adjust it.

    If none of the above methods can solve the problem, it is recommended to contact the after-sales service or professional maintenance personnel of the gas stove for inspection and repair. Do not disassemble the gas stove by yourself to avoid potential safety hazards.

  10. Anonymous users2024-02-07

    If the gas stove has an electrical pulse but does not ignite, it may generally be due to the following reasons:

    The first could be a faulty igniter. You can confirm whether it is a problem with the igniter itself, you can check whether the cable connection of the igniter is loose or damaged, and if it is a problem with the cable connection, you can reinstall the cable; If it is damaged, it can be replaced.

    The second possibility is that the tinder mouth is blocked. Check the fire mouth for dirt or other objects, if so, it should be removed, and it is also a good solution to clean the fire mouth with a cleaning agent.

    The third possibility is that the battery is low. If the igniter is battery-powered, you can check whether the battery has failed or is low on power, and it is recommended to replace the battery.

    If the above methods do not solve the problem, it is best to contact a professional maintenance personnel to inspect and repair the gas stove.

    For the problem that the gas stove has an electric pulse but cannot be ignited, you can first check the ignition, fire port and battery, and then choose the appropriate treatment method.

Related questions
9 answers2024-08-14

The reasons why the gas stove can't catch fire are: 1. Gas problemThe fuel used in the gas stove is gas, if there is a problem with the gas **, then the gas stove can't catch fire. As for the problem of gas **, most of the time it is a lack of gas balance. >>>More

9 answers2024-08-14

Gas stoves are essential tools for cooking delicious food, and they are closely related to our lives. The gas stove is a tool, and it is inevitable that there will be some problems in the process of use, so everyone should have a considerable degree of understanding of some problems that often occur in the gas stove, among which the common problem is that the gas stove can not catch fire, do not rush to ask the repairman to repair it in such a situation, you should find out why the gas stove does not catch fire, what should I do if the gas stove does not catch fire? Many times we often encounter gas stoves that do not catch fire, and there are many reasons for this kind of failure, generally speaking, there are the following reasons: >>>More

10 answers2024-08-14

Teach you why the gas stove won't catch fire.

12 answers2024-08-14

In the process of cooking in the kitchen, it is often encountered that the gas stove cannot be turned on, and it is very dangerous to light the fire with a lighter or match, so it is important to learn the correct way to light the fire.

17 answers2024-08-14

Xinfei gas stove can't catch fire causes and solutions.

1. If there is no gas, if the gas stove does not catch fire, the first thing to check is whether there is still gas, and if not, you must add gas. >>>More