How much does damask wall decoration cost per square meter? What is the construction process?

Construction Preparation: Material Requirements:

The tree species, specifications, grades, moisture content and anti-corrosion treatment of wood such as wood frames, keels, bottom plates, and panels on the soft package wall must meet the requirements of the design drawings and the Code for Construction and Acceptance of Wood Structure Engineering (GBJ206?).3) provisions.

Upholstery fabrics and other filling materials must meet the design requirements, and should comply with the relevant provisions of the fire protection of the interior decoration design of the building.

The keel is generally dried with red and white pine, the moisture content is not more than 12%, and the thickness should be according to the design requirements, and there shall be no decay, knots, splitting, distortion and other defects, and it shall be treated with anti-corrosion in advance.

The panel is generally made of plywood (plywood), the thickness is not less than 3mm, the color and pattern should be as similar as possible, when the log board is used as the panel, the red and white pine, basswood and ash and other hard miscellaneous wood are generally used, and the moisture content is not more than 12%. Its thickness is not less than 20mm, and the texture is required to be straight, the color is uniform, the pattern is similar, and there must be no knots. Defects such as twisting, cracking, discoloration, etc.

Fabrics such as strips, lattice frames and wood veneers for exterior finishes are generally made of semi-finished drying materials processed by the factory, with a moisture content of no more than 12%, and the thickness should be based on the design requirements and the appearance of good materials without problems; And pre-preservative.

Excipients include moisture-proof paper or linoleum, latex, nails (the length of the nails should be 2 times the thickness of the surface layer), wood screws, wood sandpaper, sodium fluoride (the purity should be more than 75%, without free hydrogen fluoride, its viscosity should be able to pass through the No. 120 sieve) or petroleum asphalt (generally using No. 10, No. 30 building petroleum asphalt) and so on.

If the design adopts the practice of lightweight partition wall, the base layer, surface layer and other filling materials must meet the design requirements and be used together.

The covering materials and practices must meet the requirements of the design drawings and comply with the relevant provisions of the fire protection of the interior decoration design of the building.

Main Machinery: Woodworking Workbench, Chainsaw, Planer, Percussion Drill, Pistol Drill, Cutting and Cutting Fabric Cloth, Leather Workbench, Steel Ruler (1m Length), Cutting Leather Knife, Towel, Plastic Bucket, Plastic Basin, Oil Scraper, Small Roller, Knife, Brush, Row Pen, Wiping Cloth or Cotton Silk, Sandpaper, Long Tape Measure, Box Ruler, Hammer, Woodworking Chisel of Various Shapes, Wire Saw, Aluminum Level, Square Ruler, Multi-purpose Knife, Powder Thread Bag for Playing Thread, Ink Bucket, Small White Thread, Broom, Wire Supporting Board, Wire Pendant, Red Pencil, Tool Bag, etc.

Working conditions: concrete and wall plastering has been completed, the base layer has been buried with wooden bricks or wooden bars according to the design requirements, the cement mortar screed has been plastered and brushed with cold bottom oil, and after drying, the moisture content is not more than 8%; The moisture content of wood products shall not be greater than 12%.

Water, electricity and equipment, the reserved embedded parts on the top wall have been completed.

The ceiling sub-project in the room is basically completed and meets the design requirements.

The ground sub-project in the room is basically completed and meets the design requirements.

The wooden parapet wall and joinery floor in the room are almost complete and meet the design requirements.

When making technical disclosures to construction personnel, technical measures and quality requirements should be emphasized. Large area before construction. The model room should be made first, and the team construction can be organized only after the quality inspection department has passed the appraisal.

Due to the soft and smooth brocade, the mounting of brocade is easy to deform, and it is difficult to directly mount and paste on the wooden base surface. When pasting, the back of the brocade should be starched first, and a layer of rice paper should be pasted to make the brocade crisp so that it can be cut and mounted on the wall. The slurry used for sizing is composed of flour, insect repellent paint and water, and its ratio is (weight ratio) 5:

At 40:20, mix into a thin and thin slurry. When sizing, spread the front of the brocade on a large and dry table top or a smooth large wooden plywood, and press the brocade on both sides, and use a row brush to dip the grout from the middle to both sides, so that the slurry is evenly painted on the back of the brocade, and the grout should not be too much, and the back side should be wetted.

On a separate large flat table (the top must be smooth), lay a piece of rice paper that is larger than the width of the brocade. Wet the rice paper with water so that the paper is flat on the tabletop. The amount of water used should be appropriate, preferably just wet.

Lift the slurry brocade from the tabletop, put the slurry side down, paste the brocade on the wet rice paper, and use a plastic scraper to scrape from the middle of the brocade to the four sides, so that the brocade and the rice paper are evenly pasted. When the wet rice paper is dry, it can be removed from the tabletop, and the brocade and rice paper are attached together. Before the brocade is mounted, it should be carefully cut according to its width and pattern, and the number of each cut piece should be carried out.

When the brocade is sewn, there are requirements for pattern stitching. When mounting, start from the top surface of the pattern stitching, the operation requires two people to cooperate at the same time, one is responsible for the pattern stitching, the other person is responsible for holding the brocade roll, and gradually unfold. Scrape the wallpaper with rubber while sewing on the side, and press and scrape from the middle of the paper to both sides when scraping.

Make the glue slide to both sides and paste evenly, the scraping force should be uniform and moderate, and the scraper surface should be flat. Do not use the tip of the spatula to scrape the brocade to prevent scratching the paper. If there is a small gap between the two pieces, a scraper should be applied to the freshly glued brocade surface to the side of the brocade that was glued first until it is seamless.

Other requirements for mounting operations are the same as for regular wallpapers.

The most important thing is to prevent formaldehyde pollution after decoration, use some good materials, but no matter how good the materials are, they contain formaldehyde, so they have to be vacant for three or five months after decoration to move in. First of all, it must be understood that formaldehyde cannot be completely removed, even if it is the kind of house that has lived for five years and ten years, there is still residual formaldehyde, because the formaldehyde in the decoration materials does not run out all at once, it is slowly volatilized over time, so we must be prepared to fight a protracted war. If you buy new wooden furniture or flooring at home, you can use some photocatalyst wood essential oil to brush on it, if you have a leather sofa or something at home, you can use some leather formaldehyde removal care solution to rub on it, which can be very effective in removing formaldehyde.

The most important thing is to open more windows for ventilation.

Hello, glad to answer for you.

Diatom mud is recommended.

What are the advantages.

1. Breathing and humidity.

When the humidity in the house exceeds a certain range, the micropores of the diatom mud are used to suck the moisture in the gas into it, and when the air is dry, the moisture is released. Place.

Diatom mud is called a "breathing wall" without humidifiers or electricity

Without manipulation, keep the indoor comfort between 40 and 70 degrees, which is the most comfortable humidity for the human body.

2. Purify the air.

For new houses, there are often a lot of harmful gases, and such products will decompose the harmful substances that are constantly emitted due to their own characteristics; At the same time, it can also remove various odors caused by domestic pollution, such as the fishy smell of fish farming, the body odor of pets, and the smell of pets.

The unpleasant smell produced by sleep keeps the indoor air fresh at all times.

3. Long life.

Generally speaking, the service life of this type of product is more than 20 years, and it also has the advantages of no warping, no falling off, and no fading; Therefore, it is very popular, the life of latex paint and wallpaper is 3 5 years, and there will be warping, falling off, yellowing, aging, mold and other phenomena, and it will be done at least 4 times in 20 years. It not only increases the cost and manpower and material resources, but also continuously pollutes the indoor environment with high concentrations and repetition every time it is replaced.

Question: Which is more costly, wall cloth or diatom mud?

Personally, I think diatom mud is a little more expensive, but overall diatom mud is good.

Wallpaper is mainly decorative, that is, to decorate the colorful and brilliant appearance; Diatom mud, on the other hand, is more about health. It can absorb free exhaust gas in the home environment and purify the living environment, which is more beneficial to health! It can bring you a better and healthier living environment, but it is also relatively high.

I hope it can help you and I wish you a happy life.

Question: Is the wall covering suitable for small children? I've heard that wall coverings aren't environmentally friendly enough.

I hope it can help you and I wish you a happy life.

Ask if you can recommend what products are safe, cost-effective, and not too expensive.

I hope it can help you, and I wish you a happy life.

Have a great day, ask?

Answer: Why is the safety of latex paint good? Doesn't it say that formaldehyde-free is not glued? Of course, it is not that latex paint does not contain formaldehyde and other organic volatile substances, and even, many decoration companies will add some white latex to the putty powder when they do the base treatment on the wall, and use 808 glue instead of strong to close the wall before scraping the putty.

However, the process of latex paint wall determines that after the final completion of the finish, the formaldehyde of the wall.

** is a question that many people are concerned about, so what about the cost performance of the integrated wall? The integrated wall on the market is about 120-300 yuan, and the manufacturer directly produces customized **45-180 yuan, which is definitely expensive compared to a dozen or several pieces of wall paint or dozens of pieces of flat plates. However, what most people don't know is that the purchase cost of an integrated wall is almost the same as the cost of installation.

Different from traditional materials, the integrated wall installation does not need to hire a specific installation team, and ordinary carpenters can easily complete it, and a room of about 100 can be assembled in three days, saving a lot of labor costs and man-hours.

Decoration is a big project, the previous decoration is a traditional way, now with the progress of the times, there is the concept of integrated decoration, there are many people still do not know much what is integrated decoration, how much is the integrated decoration per square? So, here is a little bit of knowledge about integrated decoration, and how much is a square meter of integrated decoration.

Integrated decoration is now a new decoration mode, compared with the traditional decoration method, there are many people who do not know very well what is integrated decoration, what are its advantages and disadvantages, how much is the integrated decoration per square? So, let's talk about some knowledge about integrated decoration and how much is a square meter of integrated decoration.

What is integrated decoration? It is a new decoration model, mainly to integrate home furnishing industry resources, form strategic procurement and ** chain, save decoration materials and time for consumers, and combine environmental protection with a home furnishing all-round service model. The question of how much is a square meter of integrated decoration depends on his advantages and disadvantages.

The advantages of integrated decoration are:

First, it is easy to install. Compared with the traditional decoration, the advantage of integrated decoration is that the installation is more convenient, there is no complicated process, and the finished wall is directly installed on the wall of the blank room, which saves a lot of time.

Second, it is easy to clean and moisture-proof. For example, the integrated wall, after the high-temperature laminating technology, so that its surface has the ability to be waterproof, with a cloth can wipe off the dirt, and there is no worry about the humid environment to make the wall mildew, which is more convenient.

Third, the sound insulation ability is good. Compared with ordinary decoration, the wall with integrated decoration has a strong sound insulation effect.

But at the same time, integrated decoration has more or less some disadvantages.

First, compare the area. The layers of the decoration are thin layers, which take up very little space, but the integrated wall is relatively thick, which takes up more space in comparison.

Second, the cost is relatively high. Because the cost of integrated wall coverings is higher than that of traditional painted wallpaper, and the material requirements are also high.

The above said what is integrated decoration and the advantages and disadvantages of integrated decoration, so how much is integrated decoration per square? The first integrated decoration is determined according to the area, various process decoration and the quality of the material, the process is more high-end, the quality is a little more expensive, and the other way is cheaper, mainly depending on personal needs.

To tell the truth, there is no fixed number for the problem of integrated wall, as little as one or two hundred, more than four or five hundred, after all, the brand of low, medium and high-end positioning and the difference in product materials, for its ** can only be given an approximate market retail price according to the three grades of low-grade, mid-range and high-end.

The low-grade integrated wall is roughly 100-180 yuan square meters;

The ** of the mid-range integrated wall is about 180-280 yuan square meters;

The ** of high-end integrated wall is about 280-500 yuan square meters.

In addition, some processes are complex, such as personalized customization integrated walls, etc., **may be higher, the above data** is just a reference, after all, the material, specifications, technology, brand, region is different. and other factors will cause the fluctuation of **, but as long as you choose the regular one, there will be no random charges.

At present, the cost of Jiqujia can be installed for you is 40 45 yuan square, if the area is large, there are discounts.

There are many kinds of integrated walls, such as bamboo and wood fiber, aviation aluminum wall panels, polymer boards, and PVC boards. Generally speaking, it is about 100-300 yuan.

One. Grade grading: At present, the market retail of integrated wall is roughly divided into three grades: low-grade, mid-range and high-end

Low-grade: 100-180 yuan square (including labor) Mid-range: 180-288 yuan square (including labor) High-end:

288-499 yuan square (including labor).

Two. Decoration material calculation: Algorithm of decoration materials:

The cost of decoration wall = ground area * 3 * unit price, for example, a 100 square house is 200 yuan per square meter, then the decoration cost is roughly about 60,000 yuan (100 * 3 * 200). This is only a rough estimate, and the specific area needs to be measured.

Three. **Difference factors: how much is a square meter of integrated wall The difference mainly has the following factors: the selection of substrates, the selection of lamination, the selection of wall adhesive, the cost of the store, the design cost, and the cost of manual installation.