How to choose an integrated ceiling LED panel light Eight tips for purchasing

1. Check the ceiling panel: The panel of the integrated ceiling occupies the largest area of the entire ceiling, so it is very important to check the panel when purchasing. Generally speaking, the panel of the integrated ceiling is made of aluminum gusset, if it is an inferior aluminum gusset, it will not only produce a lot of radiation, but also the use time is not long.

The high-quality aluminum gusset has a good gloss, no cracks, and is very light and thin.

2. Check the auxiliary materials: the integrated ceiling has many auxiliary materials in addition to the panel, and these auxiliary materials are the most important part of the installation of the ceiling. The auxiliary materials include the main frame and the base of the ceiling, and the frame is mainly the triangular keel, the main keel, the hanging piece, etc.

If you want better ceiling support, it is best to choose a sturdy galvanized steel keel, and it also has good moisture resistance. The high-quality galvanized keel has a very clear snowflake shape, and the texture is very light, and the gap is small.

3. Look at the host and electrical appliances: the main function of the integrated ceiling is controlled by the host, so you must carefully select the host when buying the ceiling. First of all, the host must have relevant quality inspection guarantees, and you can listen carefully to the sound when purchasing, if there is no obvious noise, it means that the quality of the host is good.

It is recommended that you choose a big brand, and the quality is guaranteed.

4. Product identification: It is best to choose a complete set of integrated ceilings to buy them, that is to say, the auxiliary materials and accessories of the ceiling should be complete, and the relevant auxiliary materials should also have obvious brand imprints or brand logos, if not, it is not recommended to buy.

The choice of home decoration lighting is related to the overall style. More and more friends no longer like complicated lighting, but prefer simple lighting. Integrated ceiling LED panel light is one of the best, as for how we should choose, it is better to listen to the blessing of the nest I give you a support!

1.Look at the power factor of the overall lighting.

LED panel lights must be equipped with high-quality and high-efficiency driving power supplies. If there is no power factor meter to monitor the power factor of LED lighting, consumers can use an ammeter to monitor it. The higher the current, the greater the power consumption and the more electricity is consumed.

The current is unstable, and the shorter the service life of the teasing lamp.

2.Look at the heat dissipation conditions of lighting - structure, materials.

The heat dissipation of LED lighting is also crucial, if the heat dissipation conditions are not good, the lamp beads work at high temperatures, and the light decay will be great, which will reduce the service life. At present, the main heat dissipation materials on the market are aluminum, the best is insert aluminum, followed by car aluminum, and the worst is cast aluminum.

3.Look at the driving power supply used in the lighting.

The service life of the power supply is much shorter than that of other parts of the lighting, and the life of the power supply affects the overall life of the lighting. Theoretically speaking, the life of the lamp bead is 5-100,000 hours, and the power supply life is 10,000 hours. Therefore, the design and material selection of the power supply will directly affect the service life of the power supply.

4.Look at power efficiency.

The higher the efficiency of the power supply, the smaller the power consumption and the greater the output power of the power supply itself. So choose a power supply with high power.

5.Look at the quality of the lamp beads.

The quality of the lamp beads determines the quality and packaging technology of the Buna chip. The quality of the wafer determines the brightness and light decay of the lamp beads. Generally, a good lamp bead is not only bright and high, but also has a small light attenuation.

6.Look at the light effect.

With the same lamp power, the higher the light efficiency, the higher the brightness; With the same lighting brightness, the less power consumption and the more energy saving.

After reading this article, friends who want to choose integrated ceiling LED panel lights have their own plans in their hearts, lights are an important step in home decoration, but they can't be sloppy!

When buying lamps, you need to compare its brand, style and **, etc. So how to choose LED panel lights? PChouse will take you to find out.

First, look at the whole"The power factor of the lighting"

The low power factor means that the driving power supply and circuit design used in the LED panel light are not good, which will greatly reduce the service life of the LED panel light! The power factor is low, and the life of the LED panel lamp with the best lamp beads will not be long. The power factor is high and low, and it is used"Power Factor Table"You can detect it!.

Generally, the power factor requirements of export LED panel lamps are above. The power factor is lower, it should be said that unqualified products or garbage products, not only have a short life, but also the actual power consumption is about twice as high as the nominal one, that is to say, compared with ordinary energy-saving lamps, LED panel lights do not save electricity at all.

Second, look at the lighting heat dissipation conditions: materials, structure.

LED lighting heat dissipation is also very important, the same power factor of lighting and the same quality of lamp beads, if the heat dissipation conditions are not good, LED panel lamp beads work at high temperature, the light decay will be great, LED panel lamp life will be reduced. The main heat dissipation materials used are copper, aluminum, PC, copper thermal conductivity is better than aluminum, aluminum thermal conductivity is better than PC, now radiator materials generally use aluminum the most, the best for the insert aluminum, car aluminum (aluminum profile, extruded aluminum) second, the worst is cast aluminum, insert aluminum heat dissipation effect is the best!

3. Look at the LED panel light"Lamp bead quality": The quality of the lamp beads is determined by the chip quality and packaging technology.

The quality of the chip determines the brightness and light decay of the lamp beads. A good lamp bead not only has high luminous brightness, but also has little light attenuation.

Fourth, look at the driving power supply used in the LED panel lamp, the service life of the power supply of the LED panel lamp is much shorter than other parts of the lighting, the life of the power supply affects the overall life of the lighting, the theoretical life of the lamp beads is 5-100,000 hours, and the life of the power supply is 10,000 hours, the design and material selection of the power supply will determine the service life of the power supply. The appearance of the aluminum alloy power drive is better than that of engineering plastics, one is its good heat dissipation, and the other is that the transportation and use process can effectively protect the parts inside from being crushed and loose, and reduce the failure rate of power drive.