In spring and summer, the walls and floors are susceptible to moisture and deformation, do you know

I definitely know what to do, if the floor is damp and deformed, it may need to be readjusted, and I don't need to let the house return to a dry state as soon as possible, so that the floor can be easily corrected.

I think I can adjust the temperature at home, and I can also put an air conditioner at home, so that the floor can be prevented from being deformed by moisture.

We must make the house dry, we must open the windows for ventilation, so that it is okay.

As soon as the floor at home is alternating between spring and summer, it is particularly damp and should be ventilated. When the weather is significantly warmer from cold, close all doors and windows immediately, and try not to turn on the exhaust fan except for cooking, so as not to draw the humid air from the outside into the room. Turn on the air conditioner to dehumidify.

Dehumidify the room with a dehumidification or cooling device. If the moisture regain is too severe, it is recommended to use a dehumidifier for better results. In particular, remember to close the doors and windows when turning on the air conditioner to promote dehumidification.

1.In order to prevent moisture from entering, many people will close the doors and windows at home, thinking that as long as they do not touch the outdoor air, they can prevent moisture back. However, water vapor can still enter through the gaps in the kitchen and bathroom.

Closing doors and windows will not only prevent moisture, but also easily breed bacteria and endanger the health of residents. Therefore, it is best to open the windows for ventilation when moisture-proof, so that the tiles can bask in the sun, breathe freely, and accelerate the evaporation of water, so as to achieve the dehumidification effect.

2.Director Wang of the Air Testing Center advises residents to remember to close their windows when the humid air hits in spring. In particular, the windows facing south and southeast should be closed so that you don't give any chance to sneak out of the window and stare at the moisture.

The most important time to prevent moisture is in the morning and evening every day, and the air humidity is higher than at noon. If the doors and windows are not closed in time, moisture can seriously penetrate into all corners of the home. When a room is damp, it is generally difficult to completely dehumidify.

You can spread some newspapers, waste books and other water on the ground to absorb water. If possible, you can also sprinkle some chaff or sawdust on the floor to absorb water and dehumidify and prevent slipping. When the weather is wet, you can use a soft rag to wipe the floor, but be sure to wring out the rag so that it doesn't drip when cleaning up stains.

3.Spring moisture can also be used to prevent the indoor air from being too humid, causing the home to be damp, especially the woodwork and wooden floors. Changing the environment of indoor air with air conditioning is now a good way to prevent dampness in your home.

The humidity of the room in the spring not only affects the lifespan of the floor, but also breeds bacteria, which adversely affects our health. The above is the answer to how to solve this problem when the floor at home is at the turn of spring and summer.

First of all, be sure to open more windows for ventilation to keep the room dry, and you can also turn on the air conditioner to dehumidify.

I think this situation should be replaced by the floor, it should be caused by the floor problem, generally speaking.

If the deformation rate is not large, it should be able to recover, but it is necessary to remove the damp floor, dry it with a heavy object, and put it back in place, while making sure that the other floors are not eroded by moisture. Wipe the water dry with a dry rag. If a small amount of water is sprinkled on the floor and it doesn't stay long, simply wipe the water off the floor with a dry cloth.

Because the amount of water is small and the time is short, the water does not penetrate into the interior of the floor, which has little effect on the floor and does not require excessive tension. Drain the air separately, and if the wooden floor is flooded with water that is not very serious, the water should be quickly sucked off the surface of the floor using a dry rag, etc., and then the water should be sucked out of the gaps in the joints of the floor using a vacuum cleaner.

If the immersion area is not large, use an electric blower to dry the gap and blow it to the cold air stall. If the water immersion area is large, after the water on the surface of the floor has been sucked dry, close the doors and windows and adjust the air to the maximum. It is difficult to fundamentally solve the problem of floor moisture return after construction.

In general, the first half will be more severe, and the second half will be better.

In normal times, more attention should be paid to moisture prevention. During the day, especially in the afternoon, the windows can be left open for a period of time, and at night they can be closed in time. If it rains, remember not to open the windows.

There are also some professional moisture-proof desiccants on the market. Although the floor looks good, special care should be taken during maintenance during use, especially when the floor is flooded.

If a small amount of mold is found on the floor, mix weak bleach with water in a ratio of 1:3 and wipe the floor with a damp cloth until the mold is removed. The bleach concentration should not be too high.

Failure to do so will damage the floor wax on the surface of the floor. If there is mold on the inside of the floor, the mold floor must be removed and replaced with a new one so as not to infect other floors.

If it is just a simple surface damp, not so fragile, the paint surface must not be overlapped with moisture, and it should be mainly dried in the shade, so you don't have to worry. If full or soaked in water. The focus is on shade drying.

The place where the floor is placed can not be directly exposed to sunlight, after drying, it can be reinstalled after drying; However, due to the fact that many woodworking boards, particleboard and other materials are used in the home decoration process, these materials encounter the right temperature and humidity, and they are not professionally treated with insects before processing. The most easily damaged by insects is wood, and there is no doubt that wooden flooring will become the first choice for insect infestation.

Look at how big the retractable seal is If you reach the wall, you have to re-lay If not, as long as the solar energy shines on the time, it can be restored in about 3-7 days As for the problem of insects, for qualified wooden floors, there are generally no insects.

If there is no problem, the first thing to remove can not be in direct sunlight, and the shade can be dried for a few days, otherwise the paint surface will blister, and if there is a problem, don't use it again, cross stack.

Therefore, when bugs appear on the floor, the first thing to do is to figure out what it isRaw bugs. In addition, many people only pay attention to the quality of the wooden floor itself when paving the wooden floor, and often ignore the quality of the wooden keel.

Generally, the reason for insects on the wooden floor is that the seams of the floor are relatively large, and the dirty things leak down and are easy to breed insects, so it is necessary to pay attention to the cleaning of the wooden floor on weekdays. Also, if someone is planning to lay wooden floors in the near future, be sure to do so when laying them.

When decorating, there is a clever way to prevent it, be sure to brush a layer of ground solid, which can avoid the erosion and deformation of the wooden floor by moisture, and also avoid the floor seepage of dust.

Look at how big the retractable seal is If you reach the wall, you have to re-lay If not, as long as the solar energy shines on the time, it can be restored in about 3-7 days As for the problem of insects, for qualified wooden floors, there are generally no insects.

You can remove the floor, and you can install it back after drying it in the sun, be careful not to lose it.

It is best to replace the floor in the bedroom, and the floor tiles are suitable for other places.

If there is no effective way to restore it after it is deformed by water, you can try to use an electric iron to iron your clothes.

It can be dried in the sun, or it can be recalculated, be sure to keep it dry, ventilate it and not get too much water.

If it is not serious, just open the window to bask in the sun, if it is serious, it may have to be replaced, and it is better not to see water at ordinary times.

How to choose flooring.

First, the planning before choosing the floor can not be less.

1. Household flooring is more cost-effective than floor tiles.

Flooring is the latest popular decoration material and is cheaper than traditional floor tiles. If you want to save money by decorating the floor, you also need to consider the decoration style at home and choose the right floor according to the decoration style.

Flooring and floor tiles are found throughout the renovation and maintenance process, and flooring is more cost-effective. If there is floor heating at home, if there is a problem, the floor is removed and repaired, and then assembled. The floor tiles have to be broken and re-paved, so that they need to be purchased again.

2. Reasonably plan the floor paving area and purchase on demand.

In order to reduce the waste of flooring in the decoration process, it is best to plan the area of the floor that needs to be used, plus the number of losses, and select it to prevent the waste of excessive floor purchase. Common laying methods for flooring: three, six, nine and one-half.

The paving method of 369 is a stepped gap structure, which usually saves materials, and the material loss is about 3%; The loss of one-half paving is the largest, about 5% higher, but the ground of this kind of laying is neat and symmetrical, and the visual effect is better.

3. Plan floor paving accessories to save money.

The accessories for floor paving include floor nails, headless nails, floor glue, moisture-proof mats, and door strips; If it is a keel floor, you need an extra keel, etc. It is the accessories of the floor that occupy a very important position in the paving of the floor, and most of the after-sales problems of the floor are directly related to the floor accessories. Therefore, choosing a good flooring accessories can save future maintenance costs.

Winter? The temperature is too low, so why don't you mention the temperature?

With the progress of society and the improvement of people's living standards, our demand for life has become more. More and more of our families have begun to lay wooden floors at home, but although the floor is very noble, it is also easy to get wet, so what are the reasons for the dampness of the floor? And how to solve it?

Next, I will introduce to you the causes of floor moisture and the solution to floor moisture.

Dry the floor with a dry rag and clean the water.

If a small amount of water is spilled on the floor and it does not stay for a long time, simply wipe the water off the floor with a dry rag. Because of the small amount of water and the short time, the moisture will not penetrate into the inside of the floor, and the impact on the floor is not large, so there is no need to be overly stressed.

Blot up the water separately from the air conditioner to blow the floor.

If the wooden floor is not very seriously flooded, use a dry rag to quickly absorb the moisture on the surface of the floor, and then use a vacuum cleaner to suck away the water ant steam from the gap in the joint of the floor. If the flooding area is not large, you can use a hair dryer to open the cold air gear to dry the gap, if the flooding area is large, after the water on the surface of the floor is absorbed, the doors and windows are tight, the air conditioner is adjusted to the lowest temperature, and the air conditioning cooling time can be adjusted to dry the floor within one day. Bleach against mold on the floor.

If the floor is not treated in time after being damp, it is easy to develop mildew, and it will cause mildew in a large area after a long time. If you find a small amount of mildew on the floor, you can mix warm bleach and water in a ratio of 1:3 and wipe the floor with a damp rag until the mold is removed.

The concentration of bleach should not be too high, otherwise it will damage the floor wax on the floor surface. If the inside of the floor has become moldy, the moldy floor needs to be removed and replaced with a new floor to avoid infecting other intact floors.

The maintenance of the floor is what we should pay attention to, the above is what I introduced to you today about the basic situation and related introduction of the dampness of the floor, I believe that friends have also had a certain understanding, I hope this article can help you.