How do you add oil to an electric sprayer? What kind of engine oil is used for electric sprayers

How to operate the sprayer.

First, the user must go through strict training, the first use of the spraying machine, paddy field spraying machine, must be familiar with the operation and maintenance manual, to figure out the performance of the machine and the use of precautions.

2. The operator should wear long clothes, trousers, boots, masks, gloves and protective glasses when spraying pesticides to prevent poisoning.

Third, the spraying machine should be cleaned and inspected. Clean the medicine barrel to avoid unnecessary losses caused by the chemicals left over from the last spray. Check the position of the oil level of the engine, paddy field sprayer, do not lower than the standard scale, and the color is normal, and the viscosity is appropriate.

Check the lubricating oil level of the high-pressure pump, which cannot be lower than the scale mark. Check that there is enough gasoline and air filter.

Whether it is clean or not. Whether the various fixing screws are tightened, whether the length of the high-pressure pipe is sufficient, and whether there is damage.

4. The operator should close the outlet valve before starting, open the unloading handle to make it in a decompression state, and adjust the pressure of the high-pressure pump to a small size. When starting the engine in the cold state, the damper should be closed first, the throttle should be opened to the starting position or larger, and then the damper should be opened in time after starting. When the engine is warmed up, the damper can be opened and activated.

5. Open the outlet valve, adjust the high-pressure pump to the required pressure, and spray at a uniform speed. The continuous working time of the sprayer should not exceed 4h.

How to use and maintain the spraying machine.

1. After 50 hours of general work, the filter element should be replaced with a new one.

2. Turn off the machine after starting it for 3-5 minutes, remove the oil drain nail to release the dirty oil, and then fill with new oil, pay attention to measuring the oil level.

3. Check the air filter element frequently, and clean the filter when you feel that the machine is weak or not easy to start. Paper filters should be blown out by a fan or knocked out of dust. The sponge cartridge can be cleaned with soapy water or other detergents, dried and installed.

4. The oil must be changed after 5 hours of use of the new machine, and the oil must be changed every 30 hours in the future. When changing the oil, it is necessary to warm up the engine and change it.

5. After each work, wipe the whole machine, check whether the working parts are loose, and tighten them in time. After each work, fill with clean water, rinse the medicine barrel, pump body and tube gun.

Electric sprayer plus oil method:

The filling is suitable for 4t oil, and the machine is placed flat, and the oil level reaches the oil tank filler port without overflowing. Check the oil level before each work to ensure the good lubrication effect of the machine.

Precautions for oil use in the pump body of the automatic spraying machine: it is forbidden to start the power machine without adding oil! Fill 4t oil into the crankcase of the pump body, check the oil level from the oil window, and the middle is the standard. There are three oil cups above the plunger, fill with butter, work for 5 hours and screw in a little.

Two-stroke gasoline engine does not have a separate lubrication system, is to infiltrate the oil into the gasoline mixed burning, so as to lubricate the parts, generally speaking, there are no too strict requirements for the oil, you can use the motorcycle two-stroke special oil, if there is no ordinary engine oil, it doesn't matter, according to the engine manual ratio on it.

Electric sprayers do not use engine oil, but lubricating oil. Lubricating oil mainly plays the role of lubricating mechanical running parts, reducing wear, reducing friction and prolonging service life. Different electric sprayers may require different types of lubricants, so it is advisable to check the instructions of the electric sprayer or contact the manufacturer to determine the correct type and specifications of the lubricating oil.

In general, lightly loaded mechanical oils or lithium-based greases are used. When adding lubricating oil, the sail bench should be carried out in accordance with the instructions of the manual to avoid adding too much or too little. At the same time, regular replacement of lubricating oil is also one of the important measures to maintain the normal operation of the electric sprayer.

Summary. The oil used in the electric sprayer is generally smokeless lubricating oil, and it is best to choose mineral oil, which has good anti-rust performance and lubricating properties, which can improve the service life of the machine. A variety of mineral oils, such as paraffin oil, silicone oil, and petroleum concentrates, are commonly used.

In addition, vegetable or synthetic oils can be used. These oils can effectively prevent rust and can effectively lubricate friction parts, thereby extending the life of the electric sprayer.

Can you add, I don't quite understand it.

The oil used in the electric sprayer is generally smokeless lubricating oil, and it is best to choose mineral oil, which has good anti-rust performance and lubricating properties, which can improve the service life of the machine. A variety of mineral oils are commonly used, such as source paraffin oil, silicone oil, and petroleum refinements. In addition, vegetable or synthetic oils can be used.

These oils can effectively prevent rust and can effectively lubricate the Mozhou cracked wiping parts, thereby extending the life of the electric sprayer.