What are the indicators of the car and what are the main technical indicators of the car?

1. Automobile dynamic indicators: 1. Maximum speed;2. Maximum climbing;3. Acceleration time.

2. Automobile fuel economy index: the fuel consumption of the car for 100 kilometers under certain operating conditions or the process of a certain amount of fuel to make the car run.

3. Automobile braking performance to indicators: 1. Braking efficiency, that is, braking distance and braking deceleration;2. The constancy of braking efficiency, that is, the resistance to thermal decay;3. The directional stability of the car during braking, that is, the performance of the car without deviation, side slip and urban steering ability when braking.

4. Stability of car handling: Under the condition that the driver does not feel overly nervous and fatigued, the car can follow the direction given by the driver through the steering system and steering wheels, and when encountering external interference, the car can resist interference and maintain the ability to drive stably.

5. Car smoothness: Car ride is the performance of maintaining a certain degree of comfort in the vibration environment in which the occupants are in the process of driving. This is closely related to the chassis parameters and body geometry parameters of the car, as well as the dynamics and handling of the car.

6. Passing of the car: Passability refers to the ability of the vehicle to pass through certain road conditions. With a strong car, you can easily climb over the slope of the steep slope, you can safely drive into the river at a certain depth, or you can drive at high speed on the rugged mountain road, and you don't have to worry about stopping and getting on and off the road in the city.

In short, it can make you more likely to go where you want to go than other vehicles, allowing you to experience the feeling of conquering nature.

Other indicators are recommended.

I don't know that the landlord refers to the design, production, sales, and use.

There are many indicators about cars.

After all, he is the assembly of thousands of parts.

There are requirements for each link.

I hope the landlord is clear.

First, the main technical parameters of the car 1, size parameters length, width, height, wheelbase, wheel base, front overhang, rear overhang, minimum ground clearance, approach angle, departure angle, turning diameter, channel circle and swing value. "Road Vehicle Dimensions, Axle Load and Quality Limits" (GB1589-2004) and "Technical Conditions for Motor Vehicle Operation Safety" (GB7258 2004) have stipulated the limit size of road vehicles in China: the length of trucks, passenger cars and two-axle buses is not more than 12 meters, the width is not more than meters, and the height is not more than 4 meters.

2. Quality parameters 1) Axle load Axle load refers to the vertical load of each axle on the ground when the car is fully loaded. The national standard "Road Vehicle Dimensions, Axle Load and Quality Limits" (GB1589 2004) and the national standard "Technical Conditions for Motor Vehicle Operation Safety" (GB7258 2004) all stipulate that the maximum allowable axle load of two-axle trucks shall not exceed 10t; The maximum allowable axle load of passenger cars and trucks with more than three axles (including three axles) shall not exceed 10t.

2) The total mass of the carThe total mass of the car refers to the sum of the mass of the car itself when it is fully equipped and the load weight when it is full of passengers (including drivers) and goods according to the regulations, also known as the full load mass. That is: total mass = own mass (curb weight) + load weight 3) load weight car load mass refers to the allowable rated load weight when driving on a hard and good road surface.

When the car is driving on gravel roads, the load mass should be reduced (about 75 80 on a good road). The load mass of an off-road vehicle refers to the load weight of off-road or dirt road. First, the main technical parameters of the car 1, size parameters length, width, height, wheelbase, wheel base, front overhang, rear overhang, minimum ground clearance, approach angle, departure angle, turning diameter, channel circle and swing value.

"Road Vehicle Dimensions, Axle Load and Quality Limits" (GB1589-2004) and "Technical Conditions for Motor Vehicle Operation Safety" (GB7258 2004) have stipulated the limit size of road vehicles in China: the length of trucks, passenger cars and two-axle buses is not more than 12 meters, the width is not more than meters, and the height is not more than 4 meters. 2. Quality parameters 1) Axle load Axle load refers to the vertical load of each axle on the ground when the car is fully loaded.

The national standard "Road Vehicle Dimensions, Axle Load and Quality Limits" (GB1589 2004) and the national standard "Technical Conditions for Motor Vehicle Operation Safety" (GB7258 2004) all stipulate that the maximum allowable axle load of two-axle trucks shall not exceed 10t; The maximum allowable axle load of passenger cars and trucks with more than three axles (including three axles) shall not exceed 10t. 2) The total mass of the carThe total mass of the car refers to the sum of the mass of the car itself when it is fully equipped and the load weight when it is full of passengers (including drivers) and goods according to the regulations, also known as the full load mass.

That is: total mass = own mass (curb weight) + load weight 3) load weight car load mass refers to the allowable rated load weight when driving on a hard and good road surface. When the car is driving on gravel roads, the load mass should be reduced (about 75 80 on a good road).

The car index refers to the local limited purchase of vehicle regulations, a person can only have one license plate, no license plate must participate in the lottery, shake to the license plate can be used to license the car.

Now, with the continuous improvement of people's living standards, in order to avoid the situation of piling up and to control the increase rate of vehicles, car purchase indicators are set. You need to have an indicator to get on the cards, otherwise you can't get on the cards. Naturally, there will be fewer people buying cars, and they will wait until there are indicators to buy cars.

The conditions for meeting the car purchase index are as follows:

1) The place of residence must be in the city, including: the person with household registration in the city, and the holder of a valid residence permit in the city.

Certificates, troops (including armed police forces.

Pybi's active duty military personnel, etc.

2) Hold a valid motor vehicle driver's license of type C or above.

3) The car has not been registered in the city or the car under its name has been cancelled.

4) Those who do not have a car purchase index under their name. Those who meet the requirements can apply to the relevant departments, and pay attention to whether the indicators have been issued at any time to avoid missing the opportunity to buy a car.

If the following provisions are met, the application for registration of one configuration finger Hui Bu standard can be handled by the family unit:

1) The family shall be composed of the main applicant and other family applicants, and the total number of applicants shall not be less than 2.

2) The head of the family applicant shall comply with the provisions of Article 9 of these Rules.

3) Other family applicants are limited to the spouse, children, parents, parents-in-law or parents-in-law of the main family applicant, and shall comply with the provisions of Article 9 of these Detailed Rules for "individuals whose domicile is in this city".

4) All family applicants and their spouses do not have passenger cars registered in the city.

5) Individuals whose original spouse has a passenger car registered in the city at the time of divorce shall not be a family applicant within 10 years of divorce, except for those who have been divorced before January 1, 2021.

1. The engine model of Wuju can be distinguished by the number of cylinders, the number of valves, the exhaust volume, the maximum output power and so on.

2. The quality of the gearbox directly affects the utilization law of engine output power and the feeling of driving.

3. The structure of the frame wheel orange god, and there is a cross-sectional view of the frame on the general propaganda color leaves. The frame structure directly affects the safety of the car.

4. The front and rear wheels are suspended, which affects the comfort and road feeling of the car when driving.

5. Brake system.

It can be said that it is the qualification to play cards. There are many people who need to buy a car, and the license plate index of a motor vehicle is determined by lottery. The one who shakes the number gets the index. Only with this accusation can he get the license plate after buying the car.

In general, there are five steps in the process of licensing a new car. The first step is to pay vehicle purchase tax and compulsory insurance, but this step can be handled together when buying a car. The second step is to inspect the non-exempt vehicle, and then obtain the corresponding ** and information.

The third step is to submit the completed information to the hall of the vehicle management office for certification, and the owner signs for confirmation; The fourth step is for the owner to choose the license plate number for the car, and the fifth step is to install the license plate for the car, receive the driving license registration certificate, etc.; Once the above five steps are completed, the license plate of the car will be installed.

New car registration process:1. Prepare all kinds of certificates, and prepare the original and copy of the ID card in advance. If you are not a local, you must also provide the original and photocopy of your temporary residence permit;

2.After the formalities are complete, you can register at the DMV to apply for a license plate. First, the special traffic police will inspect the vehicle, focusing on checking the vehicle identification code, vehicle appearance, vehicle warning triangle number plate, etc.

3.After the inspection, you can select the number in the DMV lobby. Most numbers can be picked by yourself or by machine.

4.After selecting the number picker code, pay the fee and wait for the license plate. Most of them can get their license plates within three to five business days.

Millions of car purchase subsidies.