How to clean the filter of the air conditioner and how to clean the filter of the air conditioner

Open the air conditioner enclosure. Generally, the air conditioner shell has two small card slots, and the outer cover can be gently pulled outward. Then open the outer cover of the air conditioner.

There are often two buttons on the inside, and you have to open it gently to make the cover fully open. The filter was easy to remove, but got stuck in a couple of card slots. First, push the filter element up, and after the lower end is out of the card slot, then gently pull down to remove the filter element.

After removing the filter of the air conditioner, some air conditioners have black particles with enhanced filtration, which should be removed separately for cleaning and drying. Cleaning needs to be careful: the water temperature for cleaning should be lower than 50 degrees Celsius, and detergents such as laundry detergent and dish soap should not be used, otherwise the dust filter will be deformed.

When cleaning the filter element, do not brush it directly with a stiff brush, so as not to damage the filter element and affect the filtration effect of the air conditioner filter. Sponges should also not be used, because they will damage the surface of the filter and cause some wear. After the air conditioner filter is cleaned, you need to wipe the filter with a soft towel and dry it in a cool place.

Remember not to expose it directly to the sun, nor to dry it on an open flame around the stove, otherwise it will deform the filter.

When cleaning the filter, first cut off the power supply, then open the panel and take out the filter. Dust the filter with a brush vacuum cleaner and then rinse it with clean water. When it is too dirty and oily, it can be cleaned with detergent or neutral soapy water, rinsed with water and dried.

It should be noted that it must not be washed with hot water above 40 degrees. Do not use laundry detergent, dish soap, gasoline, banana water, etc., to avoid deformation of the filter. In addition, after rinsing with clean water, wipe dry with a soft cloth or blow dry in a cool place, and never expose to the sun or dry in an open flame such as a stove to avoid the deformation of the filter.

After installing the filter, plug in the power and wait for 3-5 minutes, set the remote control to the refrigeration mode, set the temperature to the lowest condition, and turn on the machine. After the test machine is checked for hidden dangers, the wind speed switch of the remote control is set to run in different gears to observe whether there is abnormal noise in the internal machine. After about 15 minutes of running after turning on the machine, observe whether the fan of the external unit is running normally, and whether there is any abnormal noise of the external unit.

After about 30 minutes of operation, observe whether the air outlet of the indoor unit has a cold air feeling, whether there is condensate flowing out of the outlet pipe of the outdoor unit, and whether the flowing water is smooth.

The cleaning method of the air conditioner filter is as follows:

1. First power off.

2. Find the air conditioner panel.

switch, one on each side of the air conditioner.

3. Hold the two ends of the panel with your hands and pull it open outwards to open the front cover of the air conditioner.

4. Pay attention not to be too strong, so as not to cause damage to the filter, and you can see the filter when you open the panel.

5. Gently lift the filter buckle upwards.

6. Remove the filter, if it is not easy to remove, do not break it hard, and gently pull it.

7. After removing the filter, scrub the dust and stains of the filter with clean water, and rinse the filter with clean water.

Precautions for cleaning the filter

1. When cleaning the filter screen, pay attention to whether the power supply is cut off, because the voltage of the air conditioner is relatively large and the danger is high, so it must be ensured that the air conditioner is in a power-off state and safe.

2. The disassembly process is very simple, pay attention not to touch the metal part of the indoor unit when disassembling the air conditioning filter, so as not to scratch.

3. Do not expose the filter screen to the sun after drying, so as not to cause the plastic material inside the filter to melt at high temperature, and place it in a cool place to air dry.

The external unit of the air conditioner is one of the main equipment used to discharge hot and cold air indoors, and the filter screen is one of the important components inside the external unit, which can play a role in filtering the air, absorbing dust and protecting the internal parts of the external unit. Therefore, cleaning the filter screen of the external unit can ensure the normal operation of the external unit and prolong the life of the air conditioner. However, many people don't know how to clean the filter screen of the external machine, so let's take a closer look.

First of all, you need to prepare some cleaning tools, such as screwdrivers, brushes, buckets, soapy water or detergent limbs, etc. Then, follow these steps to clean the filter:

1.Turn off the power and power switch, and remove the external filter. It should be noted that during the disassembly process, use a screwdriver to remove the filter first, and do not pull hard to avoid damaging the filter.

2.Put the strainer in a bucket, add a certain amount of soapy water or detergent, and soak for 20-30 minutes.

3.Gently scrub the filter with a brush, being careful not to use too strong force to avoid damaging the filter.

4.Rinse the strainer and wash it thoroughly.

5.Dry the cleaned filter and reinstall it.

It is important to note that if the filter is dirty or does not clean well, it is recommended to use a professional cleaner to clean it. In addition, during the cleaning process, it is necessary to pay attention not to let the filter deform excessively, so as not to affect the normal operation of the air conditioner.

In short, cleaning the air conditioner filter can ensure the life and work efficiency of the air conditioner, not only reduce the number of maintenance, but also ensure the quality and health of the air, so it is recommended to clean it at least once a year.

The cleaning method of the air conditioner filter is as follows:

1.Power off first.

2.Locate the switch on the air conditioner panel, one on each side of the air conditioner.

3.Buckle the ends of the panel with your hands and pull it outward, and the front cover of the air conditioner can be opened.

4.Be careful not to use too much force to avoid damaging the filter. Open the panel to see the filter.

5.Gently lift the filter clip upwards.

6.Remove the filter. If it is not easy to remove, do not break it too hard, and lift it gently.

7.After removing the filter element, first scrub the dust and stains of the filter element with clean water, and then rinse the filter element with clean water before the leakage is over.

Precautions for cleaning the filter

1.Pay attention to whether the power supply is cut off when cleaning the filter. Because the voltage of the air search and tracking modulation is relatively large and the danger is high, it is necessary to ensure that the air conditioner is in a power-off state and safe.

2.The disassembly process is very simple. When disassembling the air conditioner filter, be careful not to touch the metal parts of the indoor unit to avoid scratches.

3.After the filter element is dried, do not expose it to the sun, so as to prevent the plastic material inside the filter element from melting and opening at high temperature. Place it in a cool place to air dry.

Open the indoor cover of the air conditioner, take out the filter, and brush it with a brush; Brush most of the dirt attached to the filter and soak it in a mixture of air conditioner cleaning solution or homemade cleaning solution or dish soap and soap powder; The soaking time of the grinder is 10-20 minutes, depending on the dirtiness of the filter, after soaking, use a brush to gently bend the filter screen to make each filter hole clear and transparent; Wipe it clean with a dry cloth, check that it is intact, and install the filter to the body to see if it is running normally.

This answer applies to most air conditioner models like the GREE KFR-50GW.